How can I add a Squeeze transition effect between frames using the transition manager class on a simple slideshow using the goBack and goForward functions in ActionScript3? Below is the code I have so far:
stop();
function goBack(event:MouseEvent):void
{[code].....
im using flex builder 3 to write my AS3 classes for a slideshow. I want to use the transition manager, but when i attempt to import the class..
Quote:
import fl.transitions.*;
i get this error..
Quote:
1172: Definition fl.transitions could not be found.
I am not sure if this means the class is missing from my folders or something else?
I've been away from Flash as3 for a while, but today I need to write a map link application using it and i'm pulling my hair out with an annoying problem!
I just want an overlay to appear when a map movieclip is clicked and fade out when somebody then clicks the map. The fade in works fine, but the fade out doesn't do anything!?[code]...
I was just out and about looking for a tween class to rotate an image and I came across "Transition manage"
[Code]....
trouble is, the transitionManager doesn't work... flash just asks me "what is transition manage!? - I'm assuming I followed a bizarre walk through because I've never heard of transition manager? Also "rotation" or .rotate isn't a property for the tween class to be able to change? What am I doing wrong?
I'm trying to do transition effect with Tweener class.I read the documenation of tweener class, but it didn't solve me problem.[code]
View 2 RepliesI have the following code
TransitionManager.start(babyPreloader,{type:Fade, direction:Transition.OUT, duration:0.5, easing:Regular.easeOut});
var tempPreloader:DisplayObject = babyPreloader as DisplayObject;
this.removeChild(tempPreloader);
But since this does not wait for the transition to complete. I cannot see the transition happening. Is there a way to have a even listener for transition complete?
I am trying to do the background images for a website, but I want them transitioning. So what I done is import each image onto its own layer (four images in total), and I turned them all into a movieclip. I am then trying to add some code to make them transition between each other. I am attempting something like
var myTM:TransitionManager = new TransitionManager(my_mc);
var myTM1:TransitionManager = new TransitionManager(my_mc1);
var myTM2:TransitionManager = new TransitionManager(my_mc1);
myTM.startTransition({type:Fly, direction:Transition.IN, duration: 3, easing:Back.easeOut}) myTM.addEventListener("allTransitionsInDone", doneTrans);
function doneTrans(e:Event):void{
[Code] .....
Is there a more logical way to do this? Each image is a movie clip and I basically want them like a background slideshow?
I am doing a small transiction using TransitionManager.start() function. how can i call a method after finishing the animation? i mean how to add event handler for this?
View 0 Repliesi have a flex app that transitions between 2 states with the toggle of a button. my issue is that the effect of fading only seems to work on the 2nd transition and after. However, for my first transition... going from State1 to studyState... there is no fade effect whatsoever, in fact the components in state1 disappear completely (the footer fills the empty gap where the "body" use to be) and then the flex recreates the studyState (without any fade refilling the "body" with components only in studyState). After this first transition however, going between studyState and State1 working COMPLETELY fine.. why does this happen and how can i make it so that crossfade works STARTING FROM THE VERY FIRST TRANSITION?[code]
View 1 RepliesI have a presentation using the "presentation" template that comes with flash. I am trying to transition slides with the behavior slide transition options. but I've learned that it works find while going into a slide and doesn't go to the next slide when leaving.So basically I want it so that on right arrow first play out transition then go to next slide.
View 2 Repliesso instead of the pixels being dissolved, the pixels being added? :
ActionScript Code:
var Anim:TransitionManager = new TransitionManager(blackbox);
Anim.startTransition({type:PixelDissolve, direction:Transition.OUT, duration:1, easing:None.easeOut, xSections:35, ySections:35});
basically what i would like is the end point to be the start point and the start point the end point.
Bellow is AS to create a transitions between external swfs on (release) { if (_root.currMovie == undefined) { _root.currMovie = "main"; container.loadMovie("main.swf"); } else if (_root.currMovie != "main") { if (container._currentframe >= container.midframe) { _root.currMovie = "main"; container.play(); } } } How can i alter this code to instead of calling in external swfs i call in different frames on the same swf? I have created 1 swf with 10 animations 5 intros and 5 outros each corresponding to different sections of my page and then i have 5 midframes. how do i use action scripts to make transition between then the section i am in and the section i want to go to.
View 1 RepliesSay If I have an animation which runs to frame 80 and the loops. On a button press, it goes to frame 81 and continues from there. Currently, when the button is pressed, there is a very noticable jump from the current frame to frame 81. The lower the frame number in the loop, the more noticable the jump. Is there anyway I can say something in my button press like if current frame is less than 80, wait until it hits frame 80 until you go to 81? Hopefully, this would make the transition smoother.
View 1 RepliesBellow is AS to create a transitions between external swfs on [code]... How can i alter this code to instead of calling in external swfs i call in different frames on the same swf?
I have created 1 swf with 10 animations 5 intros and 5 outros each corresponding to different sections of my page and then i have 5 midframes. how do i use action scripts to make transition between then the section i am in and the section i want to go to.
I created this for my students but would like a simple transition effect to add between each frame.
View 7 Repliesis there a way to add transitions effect to every letters in a string in actionscript 2? i know how to split the string into and places it into array but how do i apply transitions effect to it?
View 0 RepliesI have loaded an image through code and i am now trying to apply the PixelDissolve effect to it.I am currently receiving the following error:1067: Implicit coercion of a value of type flash.display:Bitmap to an unrelated type flash.display:MovieClip.[code]
View 6 RepliesI've been asked to incorporate a slideshow into a website that I'm working on, which is fine, except they have seen a particular tranition effect that is used between images, this can be seen on these two sites...[URL]. Its kind of a bleach effect? Which I presume is achieved using some sort of tween engine like Tweenmax or the Fusekit? The Honda site also has a nice second transition effect which is pretty cool, where dots kind of fall away? Has this just been done on the timeline?
View 1 RepliesI have my main movie which loads an external swf. This swf loads different images (loadMovie("image.jpg", _root.photo.empty);How can i make each image load with an effect?
View 3 Replieshow to make this effect transition images? [URL]
View 2 RepliesHere is the .fla, I'm hoping to speed up the cube effect transition. I've been toying with the variables, and nothing is working...perhaps it works off the grid somehow? You can download the file here, it was too big by 150kb to upload here, If the download doesn't work, here's a link to the page I found the transition effect on, it's the bottom flash video. [URL]
View 4 RepliesI was looking through the tutorials on kirupa and i stumbled across the dynamic animating mc's and i was intrigued. So i made a canvas graphic real quick and imported it into flash and tested it out. at first it didn't look so good not like paint on canvas, then i changed the blend to overlay and it looked much better.I would like it to have a smoother transition so you don't notice the circles and no jumping.
View 2 RepliesI'm trying to use an onUnload transition on several movieClips, but the transition doesn't seem to take effect. the clips are just instantly vanishing. I am using AS based Tweens to handle this, btw.all other clip AS is working correctly.
View 2 RepliesDoes anyone know how this is made ? "LoadMovie Image Transition Effect"[URL]
View 1 Replieshow would one go about replicating it or something similar. I like the way the images transition between each other and the hover over zoom effect. [URL] Is there any tutorial on how to achieve something like this or close to it?
View 3 RepliesI have a 30 frame flash movie with a Bitmap image for a background and a Graphic with a Wipe-In Transition, but when I play the SWF file in Flash Player, the movie loops. Is there a way to stop this? It has to be in .swf format, can't be .html.
View 7 Replies[url]... in first site after loading complete there is a transition that bending all page.i saw this effect before some other sites but i cant find any example.i am sure it is built with pixelbender.
View 1 RepliesI'm building a dynamic gallery that supports SWFs for individual slides. In order to prevent background sound from carrying over from a previous slide to a different category page, I have attached stopAllSounds(); to navigation menu buttons. It does its job, but it turns off the sounds abruptly. I'm using alphaTo for transition effect from one page to another, and I'm wondering if there is a command that stops playing all sounds in gradation, so that I can make it consistent with page transition.
View 5 RepliesI have a swf which has a UI loader component. I have to fade it in & have a pre loader while it takes time for the image to load.
View 1 RepliesI would like to do this images masic transition effect: [URL]. How should I start ... I guess if there is any library available for handling this.
View 2 Replies