Flexbuilder :: Flex Transition Effects Work On 2nd And After Transition
May 18, 2010
i have a flex app that transitions between 2 states with the toggle of a button. my issue is that the effect of fading only seems to work on the 2nd transition and after. However, for my first transition... going from State1 to studyState... there is no fade effect whatsoever, in fact the components in state1 disappear completely (the footer fills the empty gap where the "body" use to be) and then the flex recreates the studyState (without any fade refilling the "body" with components only in studyState). After this first transition however, going between studyState and State1 working COMPLETELY fine.. why does this happen and how can i make it so that crossfade works STARTING FROM THE VERY FIRST TRANSITION?[code]
I have a <mx:Dissolve id="dissolveOut" ... /> Effect in an Flex page I'm working on, and I would like to reuse this effect in a <mx:Transition> sequence. Is there a way to call dissolveOut from MXML inside the Transition tag, or do I really just have to duplicate code?[code]
How can I do something like this: (Mask 1, 10, 15 are nice)[URL]But also make it go to a certain frame? (Like go to frame 5)The problem is I downloaded it but it's in AS2 and I need AS3.
I'm trying to do a cross-fade transition in Flex between two states, both containing a VideoDisplay object. The problem is that the default CrossFade effect takes a bitmap snapshot of both states and blends between the two. This means that the movies appear to be frozen for the time of the transition. Does anybody know of a solution that uses a PixelBender (GPU-accelerated) method of fading between two movies? My other option is to manually re-order the video objects and change the alpha of the top one, but this uses a lot of CPU (in my case ±300%)...
I just need to know how to make a flash banner almost exactly like the one in the link. I would make it my own of coarse, but I need my banner to be the same size and same effect when the pictures change. I need to know how to make the photo's change from one to another, and how to make the transition effect as the photo's are changing. Here's the link to the banner I need to know how to make. [URL].
I've been searching tirelessly for some good image transition effects to no avail. I've only found 3 or 4 and they aren't what I want. The tutorials on this site aren't categorized in a way that makes it easy to find effects for images, etc, and I haven't found any good ones so far.
Where's a good place to look besides say, flashkit?
I'm looking for a good "blidshade" style effect for images, if you know of one.
I have MX and MX 2004. I'm building myself a website and I have a logo that's displayed in the center of the stage. I have 6 different colored logos. I would like the grey logo(main logo) to blur and jitter a little while blurred when it's moused-over. I would also like to create a transition so that when people view a different section (lets say the teal colored section) of my site, the grey logo will blur and jitter while blurred, but also fade/transition into the teal logo. purple for the purple section, etc... I know how to do fading tweens, however I don't know actionscript very well at all. part of it even if it all can't be done together. I'd like some version of this effect if possible.
How can I add a Squeeze transition effect between frames using the transition manager class on a simple slideshow using the goBack and goForward functions in ActionScript3? Below is the code I have so far:
stop(); function goBack(event:MouseEvent):void {[code].....
I have a presentation using the "presentation" template that comes with flash. I am trying to transition slides with the behavior slide transition options. but I've learned that it works find while going into a slide and doesn't go to the next slide when leaving.So basically I want it so that on right arrow first play out transition then go to next slide.
I am trying to create a page transition that will play a movieCLip transition into a page. and then it stops then when another button is pressed, it will play that transition out while loading the appropriate one. In the attached FLA, if you click on the red button first, the blue transition plays,
it works correctly/ Playing out of the blue Transition and into the Red transition. However if I click it again it does the opposite, and just keep alternating.
If I add the
_root.transitionClip2.play("out");
to the first button then, nothing works right. I will eventually have more buttons, and may need to use a variable to control which "out" transitions is played, but how do I get the buttons to do this?I just want it to exit the current movie clip and play the "in" section of the desired clip.
I have a vector circle and what to do the following: I'd like to animate it with tweenlite so it looks like a shockwave of an explosion. At first it fades in (from 0 to .5) and gets scaled and when it reaches half of the total animation time it fades out but it still gets scaled (hope you know what I mean). Currently it looks horrible because I don't know how to get a smooth transition from part 1 to part 2 with TweenLite. My animation stops when reaching the end of part 1 and suddenly makes a jump to part 2.
Total time of animation: .75 sec Total amount of scaling: 5
Code: part 1 of 2: TweenLite.to(blastwave, .375, {alpha:.5, transformAroundCenter:{scale:2.23}, onComplete:blastScaleFadeOut, onCompleteParams:[blastwave]});
part 2 of 2: private function blastScaleFadeOut(object:DisplayObject, time:Number = .375, scaleVal:Number = 4.46) { TweenLite.to(object, time, {alpha:0, transformAroundCenter:{scale:scaleVal}, onComplete:backgroundSprite.removeChild, onCompleteParams:[object]}); }
I have a vector circle and what to do the following:
I 'd like to animate it with tweenlite so it looks like a shockwave of an explosion. At first it fades in (from 0 to .5) and gets scaled and when it reaches half of the total animation time it fades out but it still gets scaled (hope you know what I mean).
Currently it looks horrible because I don't know how to get a smooth transition from part 1 to part 2 with TweenLite. My animation stops when reaching the end of part 1 and suddenly makes a jump to part 2.
Total time of animation: .75 sec total amount of scaling: 5
Code:
part 1 of 2: TweenLite.to(blastwave, .375, {alpha:.5, transformAroundCenter:{scale:2.23}, onComplete:blastScaleFadeOut, onCompleteParams:[blastwave]});
I have a vector circle and what to do the following:
I 'd like to animate it with tweenlite so it looks like a shockwave of an explosion. At first it fades in (from 0 to .5) and gets scaled and when it reaches half of the total animation time it fades out but it still gets scaled (hope you know what I mean).
Currently it looks horrible because I don't know how to get a smooth transition from part 1 to part 2 with TweenLite. My animation stops when reaching the end of part 1 and suddenly makes a jump to part 2.
I have this actionscript which works perfectly for a little xml gallery. But What I am trying to do is get a simple alpha transition to work when you select another picture.
i have looked everywhere for a tutorial on this - i have tried writing, and re-writing codes....i just cant get it. is there any tutorial i overlooked? here is what im looking to do - NO SHORTCUTS: have my main file that loads the buttons, my external swf container, my intro animations, and my swf "out" and "in" animations when a button is clicked i want it to point me to specific frame labels. i will have an "out" and "in" frame label and which will be the locations of the transitional starting points i want it to play the "out" transition, than unload the current swf, than play the in transition, than load the swf of the button that was clicked i want the animations to all be done using frame labels all within the MAIN swf file.... i have had no luck doing this....and i do NOT like the tween class....
I have a vector circle and what to do the following:I 'd like to animate it with tweenlite so it looks like a shockwave of an explosion. At first it fades in (from 0 to .5) and gets scaled and when it reaches half of the total animation time it fades out but it still gets scaled (hope you know what I mean).
Currently it looks horrible because I don't know how to get a smooth transition from part 1 to part 2 with TweenLite. My animation stops when reaching the end of part 1 and suddenly makes a jump to part 2.
Total time of animation: .75 sec total amount of scaling: 5
I m trying to install Flex Builder 3 into Eclipse 3.5.1 as a plugin on Mac 10.6.2.During the installation phase, FB3 says it only support eclipse 3.3 & 3.4. But I started the installation anyway. After the installation was done, I can't find Flex perspective from Eclipse. So I google around and found out the possible way to manually add this link file from folder "links" to point to the FB3 Plugin folder. I did that and FB perspective can be shown now. But when I try to switch to FB perspective, error occurs:[code]
Here's the deal:I have an image and a button on my mobile app's homeview. I apply an animation to the image by pressing the button. That works great. PROBLEM:I want to add a view transition that pushes to the next view after the animation completes.CODE:
It is a circle divided into 5 equal parts each 72 degrees. So each state you can see is increases the rotation by 72 degrees. I have a transition for the rotation when the state changes like so:
[Code]....
Being that this is a circle you can actually rotate CW or CCW to get to the right degree for the state. Usually the rotation-transition uses whichever is lower. For example to get from Classic to Centro (0 to 72) it goes CW. But this is not always the case. To go from Lace to Lido (144 to 216) it goes CCW. This is not desired sense it would make a much better transition to go CW because it requires less spinning of the circle to get to the desired degree.
State transitions in flex are very helpful. Is it possible to add an automatic state transition between state A and state B in case there is no user response for 5 mins in state A or pop-up an alert?
I have a custom viewstack that applies automatically a slide in/slide out effect when the view changes. Everything goes smoothly when the views are lightweight but becomes jumpy when the next view requires heavy rendering. Here are the relevant parts of the code :
I just started developing in "Flash Builder 4" (flex framework) and I just can't figure out what the development process of animating characters should look like. My goal is to animate (standing - walking - jumping ...) a simple character like the stick figures in the game "Stick War" [URL]. I know there is a technique to do so by shape tweening in the Adobe Flash tool by using keyframes. But what I can't figure out is how to do it in Flex. Also it would be nice to get a description of a workflow from drawings to animation to code. Especially how to encapsulate the animated character in a class that manages the transition from e.g. running to jumping.
I already had another question on this issue which was successfully resolved. But now, with a slightly different example, I'm stuck again.I have two states. When I switch from A to B, it resizes correctly, but when I switch from B back to A it happens without the smooth resize transition. What am I doing wrong?Here's my code:
<fx:Script> <![CDATA[ protected function rollOverHandler(event:MouseEvent):void[code].............
I have an image in Flex I want to change the image with actionscript to show some other image say every 3 seconds or so. I also want to make transition between the image and the next one for instance fade in/out.
does anyone know how to disable that slide animation and just have the action bar instantly change to whatever action bar the next view contains, but still do a slide navigation for the rest of the view. My Action bar doesn't change on every page so seeing the same image reload repetitively in the action bar.
I have created a linkbar with two labels. Now, I need to keep a track of the label clicks.i.e. If in the beginning "First" is clicked, the details will be displayed. After that, if without submitting the details, "Second" is clicked then an alert message should come to inform the user that "First is still in progress, do you want to cancel and begin Second operation". Vice-versa for Second to First transition. I need to know how to write events to keep track of which button clicked.
I want to use Adobe mxml to create a swf. However, the mxml gets compiled to swf itself and is not available after creating the swf. I want to add states with UI components without compiling it every-time.
I was playing around with the transition tool after reading one of the posts now every time I add an image from the library to the stage it's got the transition tool handles. How do I get rid of them??
