Flex :: Does FlexBuilder 3 Work With Eclipse 3.5.1
Dec 5, 2009
I m trying to install Flex Builder 3 into Eclipse 3.5.1 as a plugin on Mac 10.6.2.During the installation phase, FB3 says it only support eclipse 3.3 & 3.4. But I started the installation anyway. After the installation was done, I can't find Flex perspective from Eclipse. So I google around and found out the possible way to manually add this link file from folder "links" to point to the FB3 Plugin folder. I did that and FB perspective can be shown now. But when I try to switch to FB perspective, error occurs:[code]
View 1 Replies
Similar Posts:
Apr 29, 2011
The Flex 4.1 SDK ships with OSMF 1.0. For new features, OSMF can be updated. Adding the updated osmf.swc to a Flex 4.1 project, I get error messages as soon as I add an OSMF component in my application (VideoDisplay in the sceenshot): Screenshot: [URL].png OSMF 1.5 download page According to the documentation, OSMF 1.5 should work with the Flex 4.1 SDK. Unfortunately, I have to stick to Flex 4.1 because Flash 10.1 needs to be supported (Flex 4.5 needs Flash 10.2) When I change the SDK to version 4.5, the error messages disappears and it compiles as expected. --> Is the documentation wrong about supporting Flex 4.1 or am I doing something wrong?
View 2 Replies
May 18, 2010
i have a flex app that transitions between 2 states with the toggle of a button. my issue is that the effect of fading only seems to work on the 2nd transition and after. However, for my first transition... going from State1 to studyState... there is no fade effect whatsoever, in fact the components in state1 disappear completely (the footer fills the empty gap where the "body" use to be) and then the flex recreates the studyState (without any fade refilling the "body" with components only in studyState). After this first transition however, going between studyState and State1 working COMPLETELY fine.. why does this happen and how can i make it so that crossfade works STARTING FROM THE VERY FIRST TRANSITION?[code]
View 1 Replies
Aug 1, 2011
How to get the SLOC count for the Flex code in Eclipse?Is there a plug-in similar to "Metrics" for finding information about the Flex porject?
View 2 Replies
Jun 15, 2011
As me and my friend are working on the same source code of a project on flex builder, I'm looking for a solution that makes it possible to work on different computers and edit the same source code.
View 3 Replies
Oct 18, 2011
I want to run the Flex SDK 4.5.1 on Eclipse IDE. I have followed this http:[url].....step by step and it was same as it was written.But then when i first built my sample code and ran it, it gave me these errors. I cant figure out what the problem is:This is the sample code:
and these are the ERRORS:
Loading configuration file C:Mario's FilesSTFFlex SDKflex_sdk_4.5.1.21328frameworksflex-config.xml
_application_Styles.as(24): col: 38 Error: Syntax error: expecting rightparen before s.[code]....
Do we have to get a compatible Eclipse-FlexSDK-Flash version??
View 1 Replies
Aug 29, 2011
How to add Flex to eclipse IDE
View 1 Replies
Jul 3, 2009
I got this weird problem, when i run this code:
Code:
package {
import flash.display.MovieClip;
[Code]....
In Flash Cs3 it acts exactly as i want, the ENTER_FRAME runs and the addObject places numerous sprites on the stage. In the window output i'll see the trace. But when i run this code in Eclipse which is set up to use the Flash Player as output i get the first trace from EDHV_ImageSlider but the traces inside addObject won't show up, the sprites however are generated perfect.
The difference between the eclipse setup and the cs3 setup is the fact that the cs3 setup has a *.fla which calls the *.as package.
View 1 Replies
Feb 28, 2010
I'm working on a project on Flex AS3.0 project in Flex Builder. It was working fine, I changed the name of one of my classes and all the related process. Now when I compile dubug the thing, it keeps on compiling an older version even if I comment all the code in main. It still compiles the old files. I have cleaned the project , but still the same old problem.
View 2 Replies
Mar 24, 2010
It's growing pains time again. Some of our stuff requires FlashBuilder 4 and some still requires FlexBuilder 3. Both are installed OK, and no projects use both IDEs. The trouble is, when I go back to work on a FlexBuilder 3 project it takes freakin' forever to build and I get weird errors like these: This doesn't seem to cause any identifiable problems except to throw up a modal dialog at various points in the build process, forcing user interaction. But I do notice that memory fills up fast in FB3 and generally FB3 starts behaving strangely and ultimately quits once it gets up over 700MB.
This is only a temporary bridge situation until we get all projects into FB4, but "temporary" could mean weeks if not months. Does anyone have any advice for how to get through this bridge period? Is there anything I can do to make these two IDEs work and play well together? Failing that, does anyone know what "java.lang.String" is the "reason" for the problem? Does Eclipse have a resource bundle somewhere that is getting corrupted when i go back and forth between the two?
View 1 Replies
Jun 14, 2010
is there any documentation on the FlexBuilder "expressions" tab, and what expressions it can accept?As far as I can tell, it can show the value of variables, but that's it: comparisons, function and method calls all fail: [code]this is specific to FB3 Flex Builder. Apparently FB4 Flash Builder is slightly less incompetent.
View 2 Replies
Aug 12, 2010
I am not using FlexBuilder, I'm using the free Flex SDK with TextMate. I'm having some trouble figuring out what this FlexBuilder process actually does behind all the nice dialogs and things, so that I can do the same thing by tweaking whatever the relevant file is, but Googling just points me at similar instructions telling me to use FlexBuilder.
View 1 Replies
May 23, 2011
Eclipse has a built in functionality to find unused variables (and methods too I guess). Flash Builder 4 is built on top of Eclipse but it doens't have that functionality. Do you know any plugin to achieve that functionality? Also, if you know any other kind of plugin besides SourceMate to improve Flash Builder let me know.
View 1 Replies
May 20, 2010
I have seen several examples in Flex for passowrd validator using RegExp. But every where the validation is happend for single validation.
I have a requirement, like password validations like
- At least one Upper case letter
- At least one numeric character
- At least one special character such as @, #, $, etc.
- At least one Lower case letter
- password lenght minimum 6 digits
- password cannot be same as user name
I have the code only for checking the password is valid or not . check the below code.
MXML CODE
<mx:FormItem label="Username:" x="83" y="96" width="66">
</mx:FormItem>
<mx:FormItem label="Password:" x="88" y="123" width="61">
[Code]....
View 1 Replies
May 13, 2011
I have created an Adobe AIR application that interfaces with Salesforce.com. The only drawback I have is that the data that is synced to the desktop is not encrypted. I can encrypt a database that I create locally, however, I am trying to encrypt the database that is created and maintained by the flexforforce toolkit.
View 1 Replies
Sep 1, 2011
Suggest a good tutorial on how to build a dashboard application with Flex.
View 1 Replies
Sep 13, 2011
I have stuck at the point where i need to pass a selected item of a comboBox as a parameter to a HttpService.
View 1 Replies
Feb 21, 2012
I am creating an application using flex mobile but could not find how to show alerts using flex.So can anyone please tell how to show the alert in flex mobile , mx alert don't work in this and i could not find an alternative in spark.
View 1 Replies
Oct 2, 2009
I'm trying to set up the swiz framework in flex but cant seem to get it to compile. Im using swiz 0.6.2 and flex 3.0.2. The swc is in the libs directory of my flex project. Im following the tutorial here:[URL] and my code looks like:
[Code]....
when i try to compile i get the error unidentified method loadBeans through a reference with static type Class.
View 1 Replies
Nov 7, 2009
Does anyone know of any opensource tool for creating dynamic organization chart in flex by reading values from database
View 4 Replies
Feb 8, 2010
I've noticed that, recently, builds in FlexBuilder have been taking much, much longer than they used to (30 or 40 seconds, as opposed to 3 or 4). What is the simplest way of profiling these builds to figure out what is taking so much time?
View 4 Replies
Mar 16, 2010
I am building a little Flash app that will consume some web services over HTTP. When I am in Flexbuilder and run my app there, it works fine. When I goto to my FlexBuilder project on my OS and double-click on it, it works fine. When I zip up my bin-debug file, I get this error:
Security error accessing url faultCode:Channel.Security.Error faultString: 'Security error accessing url' faultDetail:'Destination: DefaultHTTP'
So I googled that and got information on about the crossdomain.xml file. Well, I can't put a crossdomain file in the service I am calling, but I can put one somewhere else. So I put the following lines in Flex app:
Security.allowDomain("vx1391");
Security.loadPolicyFile("http://vx1391:8080/job/Remote%20FIT%20Runner/ws/trunk/flash-cross-domain.xml");
[Code]....
Which I know is bad in a prod enivironment, but right now I just need to get this working locally but outside of FlexBuilder.
View 1 Replies
May 4, 2010
See: [URL] Somehow I made this happen and I don't know how to undo it. The image linked above shows my Flex Builder session. The largest section of the window is the editor. Initially, there was a blank window on the screen so I tried closing it, but I couldn't. Then I tried dragging it and realized I could drag it into a corner of itself, hence all the nested windows. I have no idea how to close these windows or simply reset the view. I went to the preferences under General > Perspectives, but the "reset" button was disabled for every available perspective.
View 1 Replies
Jun 28, 2010
I'm preparing to reorganize & refactory a Flash Builder application. The goals of the reorg are 1.) keep compile times for the part of the project I'm working on as fast as possible, 2.) keep the unrelated parts separate for code reuse. Goal #1 trumps goal #2 if there's a trade-off.
Currently, the app has assets in one project, core functionality AS3 in another project, and the MXML in a third project that links to the other two.
Would moving resources/code into swc libraries help compile time? What about compiling assets into an swf and embedding that into the main application?
View 2 Replies
May 27, 2011
I am having this error when I try to paste in code of a spark component. The component is a DataGrid and it needs to be a spark and not a mx.[code]The Error:Could not resolve <s:DataGrid> to a component implementation.How can I resolve this error. I need to make my DataGrid into a Spark Component.
View 1 Replies
Feb 26, 2010
In Flex builder 3 when I create a new flex application targeting the flex 4 sdk, it wont generate a html wrapper file. I have hunted around the web for answers, but no success. I have made sure the box is checked in the project properties to generate html wrapper.
The only workaround is to target an older version of the sdk (i.e. 3.2), which will cause the wrapper to be generated. Then I can revert the project to sdk 4. This then means I can never do a clean of my project because this will result in the wrapper being deleted. Has anyone else come across this? Is this just a bug with Flexbuilder3?
View 5 Replies
Mar 20, 2010
Does websites created by Flex Builder works on every browsers that use Flash ?
View 2 Replies
Nov 10, 2010
I did suppress warnings in flex compiler using "-show-binding-warnings=false". But what I am interested to achieve is to suppress run time warnings (especially binding warnings - since I am getting data in model mostly in XML structures and it is fine for me if its unable to bind to its nested child nodes) in console (I am working on flex on Eclipse with the flex plug in). Is there a way to achieve it?
View 1 Replies
Apr 15, 2012
I have the following version of eclipse
Eclipse Java EE IDE for Web Developers.
Version: Indigo Service Release 2
Build id: 20120216-1857
And i have downloaded flex_sdk 4.6.My question is that how do i add this plugin for the eclipse in order to use it for flash development.
View 1 Replies
Mar 22, 2012
I have installed eclipce and I want to work with flex.I found some site (url...) where somebody said that we need to install flex sdk. And than they said that we need to open window->preferences and on left side select 'Flex'. But I don't have 'Flex' item here... What is wrong? I also installed Flash Builder trial, but it does not make any sence.
View 1 Replies
