How can I do something like this: (Mask 1, 10, 15 are nice)[URL]But also make it go to a certain frame? (Like go to frame 5)The problem is I downloaded it but it's in AS2 and I need AS3.
View 1 Replies
i have a flex app that transitions between 2 states with the toggle of a button. my issue is that the effect of fading only seems to work on the 2nd transition and after. However, for my first transition... going from State1 to studyState... there is no fade effect whatsoever, in fact the components in state1 disappear completely (the footer fills the empty gap where the "body" use to be) and then the flex recreates the studyState (without any fade refilling the "body" with components only in studyState). After this first transition however, going between studyState and State1 working COMPLETELY fine.. why does this happen and how can i make it so that crossfade works STARTING FROM THE VERY FIRST TRANSITION?[code]
View 1 RepliesI just need to know how to make a flash banner almost exactly like the one in the link. I would make it my own of coarse, but I need my banner to be the same size and same effect when the pictures change. I need to know how to make the photo's change from one to another, and how to make the transition effect as the photo's are changing. Here's the link to the banner I need to know how to make. [URL].
View 2 RepliesWhat are possible ways to implement page transition effects in flash?
View 2 RepliesI have a <mx:Dissolve id="dissolveOut" ... /> Effect in an Flex page I'm working on, and I would like to reuse this effect in a <mx:Transition> sequence. Is there a way to call dissolveOut from MXML inside the Transition tag, or do I really just have to duplicate code?[code]
View 1 RepliesI've been searching tirelessly for some good image transition effects to no avail. I've only found 3 or 4 and they aren't what I want. The tutorials on this site aren't categorized in a way that makes it easy to find effects for images, etc, and I haven't found any good ones so far.
Where's a good place to look besides say, flashkit?
I'm looking for a good "blidshade" style effect for images, if you know of one.
I want to know how can I make a menu and transitions like the ones done in this site. [URL].
View 3 RepliesI have MX and MX 2004. I'm building myself a website and I have a logo that's displayed in the center of the stage. I have 6 different colored logos. I would like the grey logo(main logo) to blur and jitter a little while blurred when it's moused-over. I would also like to create a transition so that when people view a different section (lets say the teal colored section) of my site, the grey logo will blur and jitter while blurred, but also fade/transition into the teal logo. purple for the purple section, etc... I know how to do fading tweens, however I don't know actionscript very well at all. part of it even if it all can't be done together. I'd like some version of this effect if possible.
View 13 RepliesI have a button in "frame 1" that leads to "frame 2". The file has simple code:
myButton.addEventListener(MouseEvent.CLICK, gotoFrame02);
function gotoFrame02(event:MouseEvent):void {
gotoAndStop(2);
}
The problem is no transition when the frame changes. Is it possible to apply Tween transition when the frame changes?
I've made a simple preloader to my animation and its works great except transition between last frame and second frame (1 frame is preloader). In animation it looks for a disappear for a moment. For many flashes it doesnt make problem but in my case I must have continuously play after loading my flash. I'm attaching a ".fla" file to my post. [URL]. I think I must use loop in timeline from 2 frame to last after the preloader appear... but how I can do that...
View 5 Repliesi have a home button and a services button when i click the home button OR the services button first they work fine and play the transitions there linked with. when i click back on either one of those two buttons a second time they require a double click on the button for flash to comprehend and play the transition which is labelled "clicked" it works on the second click BUT on the first click "on returning to the home button the second time" it stops at the first frame of the transition instead of playing it.
View 1 RepliesI created this for my students but would like a simple transition effect to add between each frame.
View 7 RepliesSo I've got some script in which I fade in a couple movie clips using the transition manager class. These mc's are buttons but I want it to finish the transition before it enables the button features. Here is my code so far:
Code:
stop();
import fl.transitions.*;
[code].....
I am just getting into Flash and starting to make my first site. Now I have the site pretty much done but for one thing. Each time the person clicks the button it will gotoAndStop at a certain frame. Now that works but is there anyway to have it so when its in the middle of going to the next frame can it have a transition?
View 3 RepliesWhen a button is clicked on the flash site im creating, which links to the next page, ie about/contact/portfolio etc... I need the current frame movieclip to fadeout, then advance to the next page. This is my code so far
[Code]...
I usually do this with code and timeline, but i need to do this in one frame with only buttons. so for example
btn1.onRelease = function(){
bg_con._alpha = 0;
bg_con.alphaTo(100, 0.5, "linear");
loadBitmapSmoothed("images/bg4.jpg", bg_con);
}
so that fades in nicely, now i need it to fade out when the next button is pressed and then that button fades in and out, etc.
I just joined this Adobe Forums, and I am new to action script 3.0, I am working on a couple of lessons and I would like to be able to shorten the number of frames they take up on the timeline by setting the time the transition takes in seconds in my action script, and limiting each to a single frame so that my timeline can be organized and easy to work with.SO I set the seconds to 10 seconds, and kept each on a single key frame BUT THE PROBLEM is that the transition only plays as a single frame and cuts off and then moves to the next frame and so on
[Code]...
How can I add a Squeeze transition effect between frames using the transition manager class on a simple slideshow using the goBack and goForward functions in ActionScript3? Below is the code I have so far:
stop();
function goBack(event:MouseEvent):void
{[code].....
I have a presentation using the "presentation" template that comes with flash. I am trying to transition slides with the behavior slide transition options. but I've learned that it works find while going into a slide and doesn't go to the next slide when leaving.So basically I want it so that on right arrow first play out transition then go to next slide.
View 2 Repliesso I have a looping animation that is several frames long. Inside the animation is a button, when pressed I want to go to another part of the timeline, where another animation is waiting. Simple, I got that working no problem. But... I need the first animation to go to the last frame in the loop before starting the next animation. The way I have it now makes an ugly cut, and the transition between animations isn't seamless.
[Code]...
I am trying to create a page transition that will play a movieCLip transition into a page. and then it stops then when another button is pressed, it will play that transition out while loading the appropriate one. In the attached FLA, if you click on the red button first, the blue transition plays,
--red button code--
mybutton1.onRelease=function(){
_root.transitionClip.play();
}
and then stops on the stage. When you click the green button second,
--green button code --
mybutton2.onRelease=function(){
_root.transitionClip.play("out");
_root.transitionClip2.play();
}
it works correctly/ Playing out of the blue Transition and into the Red transition. However if I click it again it does the opposite, and just keep alternating.
If I add the
_root.transitionClip2.play("out");
to the first button then, nothing works right. I will eventually have more buttons, and may need to use a variable to control which "out" transitions is played, but how do I get the buttons to do this?I just want it to exit the current movie clip and play the "in" section of the desired clip.
i have looked everywhere for a tutorial on this - i have tried writing, and re-writing codes....i just cant get it. is there any tutorial i overlooked? here is what im looking to do - NO SHORTCUTS: have my main file that loads the buttons, my external swf container, my intro animations, and my swf "out" and "in" animations when a button is clicked i want it to point me to specific frame labels. i will have an "out" and "in" frame label and which will be the locations of the transitional starting points i want it to play the "out" transition, than unload the current swf, than play the in transition, than load the swf of the button that was clicked i want the animations to all be done using frame labels all within the MAIN swf file.... i have had no luck doing this....and i do NOT like the tween class....
View 10 RepliesIs it possible to keep masks in an .swf that is imported to After Effects CS4? It seems that AE is displaying the masks every time.
View 2 RepliesI have done some full Flash and actionscript 3.0 based web sites, so I feel very comfortable working on it but this weekend I decided to learn After Effects CS4 and a question immediately popped up, so I decided to ask the experts.
View 3 RepliesI have a peice of video that I exported as a swf from after effects. Now that i've imoprted it into flash it's broken down into a squence of images. The problem is I need to move the video (Pics) but obviuosly I can only move 1 image at a time and that's a real pain as there is nearly 80 of them. I really need a way of moving all of them at the same time. Highlighting all the frames and moving them doesn't work.
View 1 RepliesI'm coming to Flash from a mixed graphic design / 3D animation / motion graphics background. In any of the animation programs I've used before, including After Effects, parenting is a simple operation. ...But it seems that in flash, it's more complex. So far, I am beginning to understand that it has to do with nested scenes, or nested time lines (which may be the same thing?)... So my question is... What is the easiest way to parent one object to another?
View 5 RepliesI needed to convert a simple graphic symbol into a movie because I wanted to give it depth using the (gradient bevel) filter effect. The movie has to appear at different sizes in my animation but the filter effect does not scale with the symbol. Is there a way to make this filter effect (gradient bevel) scale when I scale the symbol it is applied to?
View 2 RepliesFrom some reason when I'm importing a PNG sequence onto stage, it's loading all of the PNGs into one frame instead of distributing them into their own keyframes like it's supposed to. I've seen this problem posted before. Anybody have a solution for this? I've also seen that people have posted that Flash CS3 HATES After Effects PNGs....how bizarre....I'm starting to figure that out.
View 3 RepliesI am need a wide range of sound effects for flash projects.
View 3 RepliesI bought Production Premium so that I can make movies. But today I need a website topper (just a little motion graphic 850X226) I made my graphic that I like in After Effects, but now I need to put it in flash so it will play smoothly as a website title. It is importing at WAY too large of a file size when I import it into my website as a movie (>2MB) And how to make it into flash.
I tried "exporting" my comp as a .swf but the swf isn't playing parts of my video are not playing (certain effects and lights). what I need to do to get my title bar to play on a website perfectly.
