i created a very simple flash animation and loading external jpg files using loadMovie(). I had test it in IE7 and its works fine but not in Firefox2, it cannot display the jpgs. What is the problem?
View 1 RepliesI want to load an external .swf file through the loadMovie function. The problem is flash takes sometime to load the file and therefore what ever commands I put below the loadMovie function, will not work. Placing this commands say 10 frames from the loadMovie function works but when online and you have a slow internet connection, it yet again fails. How do I solve this problem? I tried using onLoad but from what I gathered from several sites, it will not work with LoadMovie.
View 6 RepliesI havent been on here in a while, and about the same time I have gone without programming.Here is my delimaI have a game and I need to load an .as into a section of my flash. this is the code I have. It's on a "Checker" movie clip.[AS]
onClipEvent(enterFrame){
_global.eyes = _root.eyesP._currentframe; //Global Eyes Setter
_global.mouth = _root.mouthP._currentframe; //Global Mouth Setter
[code].....
I'm trying to use a loadMovie function inside a loop to load external PNG files when my game is loaded. Unfortunately, I can't get even a single loadMovie to work correctly, much less execute a bunch of them.The code is on the root time line, and is targetting an empty movie clip that is nested inside about 3 levels. There is a button, with a movie clip on it, and the empty clip I'm trying to load into on that.so the full target path is myBox_00.smallBox.myLogo(myBox_00 is the button, smallBox is the movie clip, and myLogo is the empty)[code].I even tried using a JPG image instead of a PNG and still no luck. The best I could do was number 4; and that didn't work, all it did was SOMETHING instead of NOTHING... unfortunately that something was to make the button (myBox_00) disappear entirely T_T.I've never had much luck with loading external images. What am I missing here?
View 9 RepliesI have 100 mc's loading external thumbnail jpgs via loadMovie(). I need a preloader of some sort to show the status of the thumbnails. The problem is that each of the mc's are loading JPG individually and I am not sure of how to combine their loading statuses into a preloader. The other option I had planned to use was to make one thumbnail larger in file size than the others so that it would load last and therefore I could use some onload function for this particular thumbnail, but I do not know what would be best to use in this case.
View 1 RepliesI spent almost a week trying to figure out how to unload a currently loaded swf using its button and loading a new swf... I have three files, a main.fla, file1.fla and file2.fla. In my main.fla, I have a code which loads the other two files. If i will click the "unload" button in the file1.swf, I would like the main.fla to unload the file1.swf and load the other file, file2.swf. Here is the code to load the file1.swf:
[Code]....
there is an index file, which links every menu item to an external SWF file.
So I finish the project, test it on my computer, and everything is fine.
But when I upload it into my server (uses cPanel), all the links (load SWF) work except a few. But it work on my PC perfectly. I tried everything to make them work, but they are still blank.
By the way, my website is [URL] The two tabs that don't work are "contribute" and distribute".
Lets say I have subgallery.swf file that loads jpeg images. And I have gallery.swf file that loads subgallery.swf.The jpeg images and both swf files are in the same folder.When I test gallery.swf it loads subgallery.swf but subgallery.swf doesn't load images. When testing subgallery.swf alone, it loads jpeg files.Is there any limitation or setting preventing external swfs loading other content?
View 2 Repliesso I've worked with AS for a while now but I've always managed to avoid using external AS files so my knowledge of how to work with them is lacking. Right now I'm trying to work with the sample files from the vimeo API found a the bottom of the page here: It all works fine but I'm confused about how to call functions in these external files.I want to dynamically change the video being played from the fla file and have how to call the function VimeoPlayer from the fla file
ActionScript Code:
VimeoPlayer('XXXX', 35697686, 640, 360);
ActionScript Code:
[code].....
I have a projector published from Mac into two formats: Mac and Windows. The main movie loads an intro flv, and it has a button to skip which loads another swf.When I run the .app in MacOS, it works fine. The video is displayed and the button jumps to the mentioned swf. However, when running the .exe in Windows, no video is showed and the button does nothing.I think it's a path problem. I'm using relative ones, and have tried in all forms:
./video/myvideo.flv
/video/myvideo.flv
video/myvideo.flv
[code]......
I have subgallery.swf file that loads jpeg images. And I have gallery.swf file that loads subgallery.swf.The jpeg images and both swf files are in the same folder.When I test gallery.swf it loads subgallery.swf but subgallery.swf doesn't load images. When testing subgallery.swf alone, it loads jpeg files.Is there any security limitation or setting preventing external swfs loading other content?
View 3 RepliesI'm a total rookie working with flash and i'm wondering if theres a way to call in text from an external file. I'm building a news feed on my companies home page, and I'd like to be able to have my boss edit it easily 'cause he doesn't know how to use flash.
you can see it here... [URL]
[URL] how can i enable the swf files to run randomly basis without click of button
View 2 RepliesI'm working on a simple example of loading external swf files with some ActionScript.I've placed an instance of List Component and gave it an instance name of loadList. Using Component Inspector, I assigned data for 4 external files as below:
Next, I've added a UILoader component (instance name - loadWindow). The code that is supposed to load the content into UILoader is this:
loadList.addEventListener(Event.CHANGE, selectItem);function selectItem[code]..........
I'm having trouble importing an external .swf into my .fla. file. The only AS that is working gor me is-
loadMovie("panoSceneNoMarkers.swf", _root);
However, once the swf shows, it replaces the background interface. I assume I have to add a _level into the code but how?
I'm having trouble importing an external .swf into my .fla. file. The only AS that is working gor me is-
loadMovie("panoSceneNoMarkers.swf", _root);
However, once the swf shows, it replaces the background interface. I assume I have to add a _level into the code but how?
I've been making a game using Adobe Flash CS3 and actionscript 2.0 on my desktop and it was working fine. I tried to transfer the folder containing the flash file and all of the .as files to my laptop via a jump drive and now, when I run the the swf, it doesn't appear to be loading any of my .as files. All of the files are still located in the same folder as my flash files and it still compiles and runs fine on my desktop.
View 1 RepliesWhen you load an SWF file, is there any way to pass data to and from the SWF file?
View 1 Repliesi need to load an external swf which is in as3...and need it to be played in my as2 swf layout. with a time slider ,play, pause ,next, previous for that swf movie clip. give ur mail id i can sent my original files. give ur mail id i can sent my original files. [URL]
View 8 RepliesIt's been a while since I've posted here so I apologies if it's in the wrong place.
My ProblemI have a large (30mb) swf file created in InDesign. It's an interactive PDF. Now rather then allowing people to view it straight away and having to wait elements to load we'd like to pre-load it somehow.
I was wondering how I might go about building a preloader for this SWF file. I have limited knowledge of action script, and most of that was as2 rather then 3.
When I click on a button eg news, I use the loadmovie function to load news.swf. In news.swf, I have the following command (from Kirupa scrolling dynamically loaded text tut) to load a text file in:
stop();
loadText = new loadVars();
loadText.load("news.txt");
[code].....
I can't seem to figure out how to load an external .txt file into my movie. I can get it to work onPress, but not for a frame script. got a quick script to display an external .txt in a dynamic text box in flash?
View 1 Repliesi know how to load in external .as files so I can update easily. but why do you still have to re-publish the swf in order for the new .as file 2 take effect.is there any way that you can make a .as file be read in & so that it updates the .swf file, much like the way loading an xml or .txt file does?
View 6 RepliesI'm making an image catalogue for a client, and for reasons unknown to me my client insisted that the images be stored as binary data in a database. ( i know, i know....but they wouldnt' listen) Anywho, the format of these images is windows bitmap (.BMP). I've just found out that they want to be able to manipulate these images in flash. So i need to have actionscrip open these images.Since the images are stored in the db they have to be accessed via a php file like this: get_image.php?id=imageid.
This works fine for displaying the images in a browser as i just put the string inside an img tag so: <img src="get_image.php?id=someid"/>The thing is, I can't seem to get flash 8 to load these images via loadmovie. I've been able to load jpeg and gif files no problem, but can't seem to get these bmps to work. Adding to misery is that because there are going to be in the neighbourhood of 40,000 images, i dont' want to actually have the images saved locally.this is what i have, it works fine for jpegs and gifs:this.createEmptyMovieClip("pic", 1);pic.loadMovie("image1.gif");
I'm trying to import some external files to my main flash file with buttons. I click button 1 and content 1 is loaded, click button 2 and content 2 is loaded, and so on. So, I got two ways for doing it:[code]The problem with this first option is that the content to the box is not renew with each click but it stacks one over each other, so I can't use it =/
View 3 RepliesI made a flash movie with 4 buttons that I need to each load swf files into the original. I have 4 selections that each need to load a different slideshow. The second part of my problem is telling the loaded swf where its target area is to be displayed in.
View 1 RepliesI am trying to load an external SWF into my project, I am pretty sure that my code is fine but when I try to display the SWF all I get is an instance of my StartPage movie clip. The code for the loader does not mention or even any relation to this movieclip! I have the loader in a class file for a separate movieclip, but no matter where I put the code I get the same result. I cannot understand why this is happening!I tried loading the same external SWF into a different project, and it worked fine.Is this a common problem? I haven't managed to find anyone online with the same problem.
View 1 RepliesI am relatively new to actionscript and was wondering how i could resize a movie with an easing motion? Is this possible? I would like to load multiple external swf files into one "main" movie with this effect.
View 4 Replieson Flash MX 2004 having problems with loading external jpegs and stuff. I got a tutorial from here and loading from a web address on it is okay, but I can't get my one to load from my hard drive because there is always an error with the path. Each of my buttons has this assigned
button6.onPress = function() {
my_mc.loadClip("file:///c:/flash pictures/picture6.jpg", "container");
};
and results in this error
Error opening URL "file:///c:/flash pictures/picture6.jpg"
What's the correct format for putting in a file path? This may be an immensely stupid question, but I'm new to this and totally confounded.
[Code]...
Iam trying to create a preloader for my XML files loading to my project. This tutorail is working fine. but only for one file. I need to create one preloader for all my XML files(6 XML files loading in the first frame.)