I have html text being loaded into an Actionscript created dynamic text field using LoadVars, and any line within the text which contains a bullet point or an accented character displays in bold. The txt file containing the html text has been saved as Unicode in order to display the characters. Cannot work out why this is happening
View 1 RepliesI'm using a Loadvars to change a text field with buttons, and would like a transition between the text field changes. I have an MC for the transition that moves a block to cover the text at label "up" and one to come down, revealing the new text at label "down". so i did
Code:
btn_mc.onRelease = function(){
transition.gotoAndPlay("up");
field_txt.text=text.text1;
transition.gotoandPlay("down");
}
but the problem is that all those actions happen at once, the text changes before it is covered and the transition MC spazzes out because it doesn't know which to goto first. Is there I can set this function up to be more ordered, so it plays "up" and THEN loads the text, and THEN goes down.
I have a dynamic text on the stage which gets updated (shows numbers) when some buttons are pressed.I just need to know if it is possible to show the first dynamic textfield in another dynamic textfield.Lets say the first dynamic textfield called "price" and the second one called "price2". when a button is pressed, the first dynamic textfield "price" will show a number. is it possible to show whatever is shown in the "price" in "price2" ?
View 1 RepliesI'm creating an XML-driven pie chart in AS3 with 2 text boxes in each pie slice. Both text fields are dynamic in the sense that they are populated by the XML doc and then told where to place themselves in the AS3. I've got them both using the same x and y position to place themselves at the moment (which of course puts them right one top of each other), but I'd like to make one of the fields (which acts like a label or a title to the larger number and % text field) place itself in a particular spot around the other text field. The result I'm looking for is to have the smaller "title" text field appear approximately 5 pixels above and left-justified to the larger "percentage" field.
Anyway, here are two sections of code that I've currently got. The first chunk, for the Tags portion, sets the position for the "percentage" text field using a good old x and y method. The second chunk, for Titles, is setting the position for the smaller "title" text.
//evaluate tags
private function evaluateTags():void{
for (s=0; s
[Code]....
Currently I'm using javascript which works fine to pass text from textfield A to textfield B:
Code:
window.onload=function()
{
document.forms.form1.shirtText.value=document.forms.form1.KitGroupID_16_TextOption_38.value
}
Is there a way to pass the textfield A text to a dynamic text input (flash) as I'd like to use the font embedding flash offers. I can make it work when loading a value from a txt file but I'm not sure how to access the value identified above as KitGroupID_16_TextOption_38 and make it appear in a dynamic input box. Eventually I might want to have 3 font choices for the user but I'd like to just see if I can get this working properly first.
Is it possible to login through flash using one Dynamic Text Field and one Input Text Field and no buttons? If so how? I have seen many tutorials dealing with logging in to PHP using flash but it requires you to make your own php scripts which i am not familiar with. Can some one tell me how to do this with PHPBBs existing php scripts... I want to be able to login thorugh a Input Text Field box and have it verify it in PHP and also be able to register and view other PHP info such as users online and FAQ..
View 2 RepliesI have made a movie clip which I export to ActionScript 3.
In this movie clip I have drawn a text field (area? well TEXT) using the plain "Text Tool".
After selecting the text, and after I have entered "0" to be displayed, I edit its properties. It's Instance Name, defined at the very top of the list I have written "score". The text engine is TLF Text and the text type "Read only".
When I have made a instance of the movie clip using AS3 I can't get the value of the text instance named "score" - when calling something like trace(getChildByName("score")) in the constructor I just get null.
I want to be able to get the value of the text "score", and I would also like to change its value.
Just how do I get the value from ActionScript? I don't want to have to create the text progamatically and position it, and I doubt that I have to.
I can't get my text to show in a text field created at runtime within a movieclip on _root. I use a trace statement and it loads into the Output box but is not visible in the textField area..there are no masks in the movieClip.
My function for creating it...
// Call the function to create textField
printBtn.onRelease = function() {
makeTxtBox("text/print.txt");
[Code].....
I have made an input text filed in frame 2 (made at authoring time) and populated a variable with it i.e var g_nameEntry: String; g_nameEntry = nameField_txt.text; and now have performed the concactenation with this variable in the Frame 4 i.e loserField_txt.text = "Sorry" +g_nameEntry where loserField_txt is another dynamic field created at authoring time in Frame4. However this is not working.
View 3 Repliesi am making a text field that must change every time a user clicks the next button.I know how to change the text of a AS created text field and change it once more with but I need to change it about 50 times +.How would I do that without making 50 frames?
View 7 Repliesi have a problem with the line space flash creates when a dynamic text is loaded in a dynamic text field on the stage i put a dynamic textFild with istance name "profile_text". then im loadin in it a text. my text is written in the Notepad like this
[Code]...
i already set a Textformat to my dynamic text with i tryied to play with the "Leading".. but i think it something dealing with paragraph. how i can decrease spacing between paragraphs??
All I want to do is add text from my string to dynamic text field when I click dynamic buttons. What should the as code be for this? Here is my code. Right now I just have the click returning another shape.
[Code]....
What I'm trying to do is to write something in an input field and then it should show up in a dinamic field. I can make this happen, but the problem is that the dinamic field shows its new text in the same format as the Input field. For example, the input text is written in TimesNewRoman and the dinamic text is in Arial, but when the dinamic text shows the input, the text is still in TimesNewRoman when I want it to be in Arial.
View 11 Repliesi have created plain text field and managed to load it from external file using the AS3 code below. Now i want to load multiple text field but this time in a button, how can i do that?
this is my button code: proposal_btn
var textLoader:URLLoader = new URLLoader();
textLoader.addEventListener(Event.COMPLETE, textLoaded);
[code].....
I have 2 input textfields on the stage and 1 dynamic textfield.
-input1 is for quantity
-input2 is for page count
When a user enters a number into the page count it makes a calculation and places the outcome into the dynamic textfield. This textfield is for the individual price.All of this so far works. What I want to do now is create another dynamic textfield for the total. So the individual price is multiplied by the quantity and this result is put in the new dynamic text field. I have the code for that working but here is where it gets tricky (for me anyway).The total price is to start off invisible. When I roll over the individual price the total price is to appear (For a test lets just say when I roll over an area the total price appears).To stop cursor flickering this should be done inside a movieclip. So... I have create a movieclip and placed a dynamic textfield inside it. They all have instance names BUT how do I reference it in script?I need to tell the resulting calculation to be placed inside the textfield which is inside the movieclip. If it isn't inside a movie clip I can do it. But how to I reference it when inside one?
Problem: I am trying to get a very simple text resize going, for my main content area in a flash website. My aim is to get a button, that on click, increases the text size of a dynamic text field.
[Code]....
This is what I tried, I am very new to Action Script, so excuse the futility of my code.
I'm trying to input a dynamic text field into many dynamic movies. I use a for loop to successfully create 18 movies. I can't seem to get the text to be input dynamically however. The dynamic text field in the dynamic movies is named eventText. This code in the for loop successfully creates 18 movies:
[Code]....
I am using buttons with a dynamic textfield and a function to set the label for various different buttons:
public function setLabel(thisLabel:String) {
visibleLabel.text = thisLabel;
}
I set a label for each button:
btn_mc.button1.setLabel("2 | Al Sabkha Bus Station - Al Qusais Police Housing");
I have a dynamic textfield ... myText ... which I would like to use as a page title ... so once the button has been clicked, the dynamic textfield should update with the label of the button clicked.
how to address a string from loadvars object to a dynamically created textfiled,
my code looks like this so far -
Code:
_root.din_fmt = new TextFormat();
_root.din_fmt.size = 10;
_root.din_fmt.font = "DIN";
[Code].....
What code can I use to shrink a piece of text in a dynamic text field to fit within a certain height and width.
View 1 RepliesI have a text inside a xml file and i would like to display this text in a dynamic text field, using the xmlConnector.The files are at the following address:[url]............
View 1 RepliesHow do I center text in within the border of a multiline Dynamic text field?
View 3 RepliesIm using a standard font (Gotham rounded) within a dynamic text field. As soon as I embed the numerals within this text field the text lowers within the text field.Double clicking the field then renders the text higher up! It seems that the height it shows when I double click is the height it compiles atThe other strange and annoying thing is that my colleague working on the same project is using the exact same font and same file but this doesnt happen to him and so the font redners out differently when he compiles
View 1 RepliesI'm trying to use a dynamic text field to pull in html text that contains a bulleted list. Easy enough, that works. But the bullets dont take on the color assigned to the field. I've tried putting it in the html text and also using NewTextFormat and neither work. Can someone help me. This should be a simple fix, but I can't find it... I just want my text and bullets to both be white.
Simple code below. Using html text inside the flash document and having a dynamic field on the screen named txt. Code should turn text and bullets green, but it doesn't work, only text turns green
this.txt.html = true;
var my_fmt:TextFormat = new TextFormat();my_fmt.color = 0x00FF00; // hex value for green
this.txt.htmlText = "<P> This is the first paragraph</P><BR><UL><LI>Bullet 1</LI><LI><BR>Bullet 2</LI><LI><BR>Bullet 3</LI><LI><BR>Bullet 4</LI><LI><BR>Bullet 5</LI></UL>";this.txt.setTextFormat(my_fmt);
So, I have some basic actionscript code. It's a legacy site, so I'm using AS2. The line of code simply does this:
myField.text = "some text"
So, I select the text field on the stage, then ensure the font is embedded. All the glyphs I want are checked, but then when I compile and test, the fonts don't show up when the code is executed. Instead, the textfield is blank! What happened?! Where did the text go?
I should mention that the .swf which I compile is loaded into another parent .swf during runtime. If that parent .swf does not contain embedded fonts, is that why it's broken?
I made a scrollbar, but now I have a problem, need to read the number of lines of Dynamic text field and if it is greater than x show the scrollbar and hide if is less. Like this:
if(text.instance>7){
scrollbar._visible = true;
}
else{
scrollbar._visible = false;
}
My problem is how do I count the total lines of dynamic text field after load a external text.
I am working in Flash CS5 and I have placed a text field (dynamic, classic text) on the stage. I am accessing it through Actionscript on the same frame like this:
var ct:TextField = TextField(getChildByName("Temperature"));
ct.text = "Hello world";
What ACTUALLY appears is this: So... The H, Ls, and D are gone. Mysteriously. Without warning. I am sitting here utterly confused. Is this just me?
PS. The text field is set to Myriad Pro Bold, a font on my computer, so it isn't like it's a font problem.
I have many countries like netherland,italy,beligum etc.. I am creating empty movieClip, inside that empty movieClip am creating dynamic text field and assigning the different countries text.. but that font is not dispalying as such in the text Field..
View 9 RepliesI know this is a tutorial on this site but I'm having trouble finding it, and its been a while so I can't remember exactly how to do it. I just need to make a dynamic text field that you can edit via text file.
View 12 RepliesI have a dynamic text field that displays text from an external file. The text file has lists of text such as a1=(text here)&w1=(text here)& etcI want to be able to make a button so that will add one to the word count, such as, a button that says "Next" and when i do that, it loads the text string A2, when i click it again, it loads A3
View 1 Replies