ActionScript 2.0 :: How To Make Goto And Stop True/false
Jan 20, 2004
In Flash MX I have a movie clip that is 32 frames long and loops. Now, what I want to happen is: when you press a button in the file, the movie clip will stop at frame 22. I don't want it to "goto and stop", instead, I want it to continue playing through until it hits 22. i.e. if you hit the button at frame 5 it will continue playing until 22. or if you hit it at 27 it plays through the cycle, but stops at 22 (if possible, it would be great if I could get it to reverse if it was past 22, but i don't want to be greedy).Now, one way I thought of doing this was to have an "on open 'stop at 22' = false " and "on press button 'stop at 22' = true.but now we come to my problem, I haven't done scripting for the past several months, and obviously what I wrote above is not an accurate script,
View 4 Replies
Similar Posts:
Jan 20, 2004
In Flash MX I have a movie clip that is 32 frames long and loops. Now, what I want to happen is: when you press a button in the file, the movie clip will stop at frame 22. I don't want it to "goto and stop", instead, I want it to continue playing through until it hits 22.
i.e. if you hit the button at frame 5 it will continue playing until 22. or if you hit it at 27 it plays through the cycle, but stops at 22 (if possible, it would be great if I could get it to reverse if it was past 22, but i don't want to be greedy).
Now, one way I thought of doing this was to have an "on open 'stop at 22' = false " and "on press button 'stop at 22' = true.
View 4 Replies
Jan 10, 2010
I have an intropage with two mc buttons that resides in another mc. They are for an English and a Dutch part. So when I click on either one of them, they go to the "Home" label (frame 2). But now at the same time when the main timeline goes to "Home" I want the movieclip container that contains 6 buttons (The English or Dutch ones) to be visible false or true when I click on one or the other. As a part of the code will show some of you there must be an 1119 error that I can't figure out. It has to do with the FrameLabel that is supposedly undifined. [code]If i remove the if statement and just put the visible statement that also gives an error.But maybe the conflict could be that btnTxtFrameN_mc nor btnTxtFrameE_mc exist on the first frame where I wrote the code and only appear as from label "Home" (second frame)
View 9 Replies
Aug 28, 2010
Selectedcolor, true to the text true or false is false text into print.colorPicker component in, I select Export to a selected color, the color value myMC texte into summer, but accuracy can not control.
var myColorPicker:ColorPicker = new ColorPicker();myColorPicker.editable = false;myColorPicker.visible = false;myMC.visible= false;myColorPicker.addEventListener(MouseEvent.CLICK, clickHandler);myColorPicker.addEventListener(ColorPickerEvent.CHANGE, changeHandler);[code].........
View 1 Replies
Apr 28, 2011
I'm trying to make a basic true/false quiz in Flash.It involves a question with two radio buttons with instance names t1 and f1 (true and false).When the user presses check answers a movieclip with instance name yn1 moves to frame 2 or 3 which displays a tick or cross.
This is all working fully, the problem arises if the user presses check answers again.This for some reason turns the ticks to crosses and the crosses to ticks and I have no idea why!?My code is as follows:
import flash.events.MouseEvent;
stop();
checkAns.addEventListener(MouseEvent.CLICK, checkAnswers);
function checkAnswers (Event:MouseEvent):void
[code]....
View 3 Replies
Oct 12, 2009
How do you make the childAllowsParent property of an SwfLoader go from false to true, that is, how as a parent application do you set up security to make the child app's events and other properties accessible to you. To read the flex docs on this, one would think nothing could be simpler:
"This property [childAllowsParent] is set to true if the child object has called the allowDomain() method to grant permission to the parent domain or if a URL policy is loaded at the child domain that grants permission to the parent domain. If child and parent are in the same domain, this property is set to true . [emphasis added]" So, I'm in a development environment and want to load an swf from my own system via an SWFLoader and then be able to monitor its events within the parent app.
[Code].....
View 1 Replies
Jul 19, 2010
on frame 1 I've got 10 movieclips and each movieclip has a toggle button to make it visible true and false.
How do write the script to do the following on frame 10?
if only 1 movieclip is visible make one_mc visible true
if only 2 movieclips are visible make two_mc visible true
if only 3 movieclips are visible make three_mc visible true
... so on for all 10 hope this make sense.
View 10 Replies
Nov 4, 2009
Basically what i have is three buttons which can be pressed in a maximum of 7 different combinations. Each of these buttons has a movieclip underneath that advances to the next frame when the button is pressed. Each clip has two frames with actions, frame 1 has:
stop();
var option1:Boolean = false;
and then frame 2 has:
stop();
var option1:Boolean = true;
So when you press a button you have true, and false when the button is pushed again.
i already have a constant loop between frames 2 and 4. At frame 4 i think i need to have some code that detects which state the 3 boolean statements are in and then load a movie depending on which statements are true and which are false.
View 6 Replies
Apr 25, 2007
I never get the hang of these.'
Code:
_global.web_link_activate = (wArray[this.id]);
if (_global.web_link_active == "no"){
_root.load_area.zoomer.enabled = false;
_root.load_area.zoomer._alpha = 20;
[Code] .....
That should work but it does not. it always says "yes" wArray is a drawn from an xml document.
XML is
Code:
weblink="yes"
Can I set vars like true and false in xml kinda like weblink=false??
View 6 Replies
Apr 5, 2005
I have this code on a movie clip:
Code:
onClipEvent (enterFrame) {
this.gotoAndStop ()
if (Key.isDown(Key.DOWN)) {
this.gotoAndPlay ()
}
}
But the problem is, when I let go of the arrow key, the movie keeps on playing. How could I make this work, so that the movie clip would go to the first frame when you let go of the arrow key?
Because this code didn't work:
Code:
onClipEvent (enterFrame) {
this.gotoAndStop ()
if (Key.isDown(Key.DOWN)) {
[code]....
I just don't know how to set the true and false statements.
View 10 Replies
Mar 5, 2010
I am having a problem with stage event listeners in Explorer 7 and up.I place an object, say a circle, on the stage in layer 1. I make it a symbol and give it an instant name of myBall_mc.I add a blank keyframe at frame 25 and create a motion tween moving the circle across the stage.I add a new layer, name it actions and place the following code in the first frame.
stop();
stage.addEventListener(MouseEvent.CLICK, onClick);
function onClick():void[code].....
Works perfectly when testing. Works perfectly when exported to a .swf in Firefox. Doesn't work at all in Explorer 7 and up.If I add a button to the stage and change the event listener to listen for a mouse click on the button, it works perfectly in all browsers.
Now here's the weird part. If I leave the script exactly like I have it above and place a box, the entire size of the stage, over the stage and set its alpha to zero. It works perfectly in all browsers. This is without even changing the event listener from stage to whatever I called the stage covering object.It registers as a stage level mouse click!
I've tried to add imports but this didn't change anything. I tried to add the parameters ,true and ,false to the stage event listener after the function name. Everthting I've tried comes up short. The only thing that works for Explorer browsers is covering the stage with an object.
View 2 Replies
Sep 22, 2009
How do you find a odd or even number using bytes instead of modulus op?
View 8 Replies
Feb 3, 2010
How do you use config constants with values other than true or false? The only documentation examples I've found uses the syntax:
ActionScript Code:
CONFIG::CONSTANT_NAME {
//do stuff
}
But what if the constant is set to a value like "hello"? How can I set a block of code to only compile if the constant is set to "hello" but not "goodbye"? I tried:
ActionScript Code:
CONFIG::CONSTANT_NAME == "hello" {
}
View 9 Replies
Feb 17, 2011
Are you aware how to set a variable to true or false in AS3;
I tried
Code:
var flip:void = true;
But this is not recognized by AS3.
View 5 Replies
May 6, 2009
I've written a PHP-script that returns true/false.I use a URLVariables-object to send two variables to the PHP-script (actually a username and password).
View 1 Replies
May 3, 2004
I have a button that imports an mp3 and is supposed to load completely before playing. Problem is, when I set the loadSound to false it doesn�t play at all, but when I set it to true it does play. Here is the code:
Code:
carregarSons = function (som, numeroVolume) {
_root.som1.stop();
_root.som1 = new Sound()[code]....
View 8 Replies
Sep 13, 2005
What is the most simplified way to get flash to return True(1) if a variable is > 0, returns False(-1) if a variable is < 0, and returns nothing(0) if the variable is 0?
View 4 Replies
Feb 11, 2004
Im trying to pass values to a php. My problem is when I try to pass the value (true / false) of a checkbox. Its set to be false by default but the thing is that I have not found the way to pass the "selected" status to my php.
I have the ckbx inside a movieclip and on a button press I pass the variables (loadVariables) from the movieclip to php (POST) I would like to know how to obtain the current status of the ckbx and pass it to a variable in Flash to send it to php (the last i know how to do)
I tried using if(check1.selected == true) but it does not work one button called submit - does the obvious
check1 - instance name for the checkbox component ck1 - instance name for the var (dyn txt) i am using to get the value
View 3 Replies
Mar 25, 2010
Need regular expression that will verify if all the letters in the word "cat" were also in the word "coating" in the proper sequence? So for the word "coating", the RegEx will test true for "cat" but false for "act".
View 2 Replies
Feb 3, 2011
[URL]
is the code. I'm trying to change the boolean value of bottomLeft to false or true in the appropriate if sections, but I'm not sure how to properly format it to actually work
View 2 Replies
Jun 27, 2011
Given this: if(myVar){}, what will pass as true or false?In JavaScript for example, false are values like null, undefined, 0, '' (empty string), false.
View 2 Replies
Feb 23, 2009
xml can only be parsed with actionscript if its from an external source true or false?
View 3 Replies
Nov 11, 2009
From my flash file I need to make a call to an external link, and retrieve a value which is either "true" or "false".This website will display either:<resp>false</resp> or <resp>true</resp>I have no influence on the external link - so I can't add anything to that file.Depending on the returned value, I want to do something simple like:
ActionScript Code:
if(true) {
//DO SOMETHING
[code].......
View 3 Replies
Feb 5, 2011
I was wondering whether anyone could explain to me the (false, 0, true) parameter of eventListeners. Its very basic I think!
View 6 Replies
Jan 21, 2012
So I want to create a method that return a true or a false. The thing is I need to be able to change the true/false ratio in percentage as a parameter
So it'll go like this:
public function trueFalseRandomizer(percentOfTrue):Boolean
{
return(result)
}
So if (100) is passed in argument it will return a true for sure and a (0) would always return a false... (25) 1 on 4 chances to get a true... etc etc etc
Maybe I could have figured it out myself but I get confused with the math.anything As I don't feel I get good randomizer when I try to create one.
View 1 Replies
Apr 25, 2003
How do you get a True/False statement to be recognized inside a movie clip with a button on the main timeline as the control. I want my movie clip to stop at the last frame if the movie clip reaches the last frame. Otherwise gotoAndStop at the first frame of the clip. I was using
on (press) {
_root.m1.gotoAndPlay(2);
_root.m2.gotoAndPlay(1);
[code].....
View 9 Replies
Nov 18, 2009
2 objects come onto the stage from the right. The user is directed to choose the bigger objects. If he selects the correct one it lights up green and then slides off. If he selects the wrong one it lights up red on and off and then the user selects the correct one, which lights up green and they slide off as the next objects slide on.I created all of the objects in 3Ds Max and I figured I would load them via XML and assign a true and false the the respective one. But should I go about it this way? And if so, I have the concept of what to do as I mentioned above but I am not sure where to begin to execute it... Also, for more info, I am doing this all with programming and not putting actual objects in flash because this is a part of a much bigger structure.So, my question is: Should I go about it as I mentioned above and if so do you know how - you could even tell me what to google to find the info I need in order to do it.
View 3 Replies
Aug 31, 2011
i try to toggle tabBarvisible = true/false with the following code:
protected function textArea_clickHandler(event:MouseEvent):void
{
if (tabBarVisible="true") {
[Code]....
but only can get tabBarvisible="true" and when i click again nothing happen. the tabBarvisible won't turn to "false".
View 1 Replies
May 21, 2010
in this listener, what do each of the the bolded elements do / what are they? stage.addEventListener(MouseEvent.CLICK, onClicked, false, 0, true);
View 9 Replies
Sep 6, 2005
How do i trace a radio button component whether its set to true or false?
View 1 Replies
