on frame 1 I've got 10 movieclips and each movieclip has a toggle button to make it visible true and false.
How do write the script to do the following on frame 10?
if only 1 movieclip is visible make one_mc visible true
if only 2 movieclips are visible make two_mc visible true
if only 3 movieclips are visible make three_mc visible true
... so on for all 10 hope this make sense.
I have an intropage with two mc buttons that resides in another mc. They are for an English and a Dutch part. So when I click on either one of them, they go to the "Home" label (frame 2). But now at the same time when the main timeline goes to "Home" I want the movieclip container that contains 6 buttons (The English or Dutch ones) to be visible false or true when I click on one or the other. As a part of the code will show some of you there must be an 1119 error that I can't figure out. It has to do with the FrameLabel that is supposedly undifined. [code]If i remove the if statement and just put the visible statement that also gives an error.But maybe the conflict could be that btnTxtFrameN_mc nor btnTxtFrameE_mc exist on the first frame where I wrote the code and only appear as from label "Home" (second frame)
View 9 RepliesCode:
my_Dyn_Txt1._visible = false
cb1.onRelease=function()[code]....
When the checkbox (cb1) is clicked the "my_Dyn_Txt1" is visible. The problem I'm having is - when I move forwad and back in my frames the checkboxes which were clicked are not visible due to
Code:
my_Dyn_Txt1._visible = false
How can I make ("my_Dyn_Txt1"), a clicked checkbox STAY VISIBLE even after I move forwad and back in my FLA frames?
i try to toggle tabBarvisible = true/false with the following code:
protected function textArea_clickHandler(event:MouseEvent):void
{
if (tabBarVisible="true") {
[Code]....
but only can get tabBarvisible="true" and when i click again nothing happen. the tabBarvisible won't turn to "false".
I am trying to use the _visible property of loaded swf files to trigger the opening animations of these files to prevent the animations from playing before the preceding swf animation finishes. The problem is that the property of the loaded swf files read true when false and vice versa. If you click the link again, the property reads correctly (false when false etc). The onEnterFrame handler seems to be the issue, but I need it to read the property. The code is a bit lengthy, but I posted it for reference sake.
// the purpose is to unload the content and use the width property
// or visible property to trigger the opening animation
// of the next swf file
onSelfEvent (load) {
[Code]....
How do make a movieclip visible false when a scroll bar starts to scroll?
//I tried this and had no luck.
this.onEnterFrame = function(){
obj_mc._visible=false;
}
Selectedcolor, true to the text true or false is false text into print.colorPicker component in, I select Export to a selected color, the color value myMC texte into summer, but accuracy can not control.
var myColorPicker:ColorPicker = new ColorPicker();myColorPicker.editable = false;myColorPicker.visible = false;myMC.visible= false;myColorPicker.addEventListener(MouseEvent.CLICK, clickHandler);myColorPicker.addEventListener(ColorPickerEvent.CHANGE, changeHandler);[code].........
Basically what i have is three buttons which can be pressed in a maximum of 7 different combinations. Each of these buttons has a movieclip underneath that advances to the next frame when the button is pressed. Each clip has two frames with actions, frame 1 has:
stop();
var option1:Boolean = false;
and then frame 2 has:
stop();
var option1:Boolean = true;
So when you press a button you have true, and false when the button is pushed again.
i already have a constant loop between frames 2 and 4. At frame 4 i think i need to have some code that detects which state the 3 boolean statements are in and then load a movie depending on which statements are true and which are false.
In Flash MX I have a movie clip that is 32 frames long and loops. Now, what I want to happen is: when you press a button in the file, the movie clip will stop at frame 22. I don't want it to "goto and stop", instead, I want it to continue playing through until it hits 22.
i.e. if you hit the button at frame 5 it will continue playing until 22. or if you hit it at 27 it plays through the cycle, but stops at 22 (if possible, it would be great if I could get it to reverse if it was past 22, but i don't want to be greedy).
Now, one way I thought of doing this was to have an "on open 'stop at 22' = false " and "on press button 'stop at 22' = true.
In Flash MX I have a movie clip that is 32 frames long and loops. Now, what I want to happen is: when you press a button in the file, the movie clip will stop at frame 22. I don't want it to "goto and stop", instead, I want it to continue playing through until it hits 22. i.e. if you hit the button at frame 5 it will continue playing until 22. or if you hit it at 27 it plays through the cycle, but stops at 22 (if possible, it would be great if I could get it to reverse if it was past 22, but i don't want to be greedy).Now, one way I thought of doing this was to have an "on open 'stop at 22' = false " and "on press button 'stop at 22' = true.but now we come to my problem, I haven't done scripting for the past several months, and obviously what I wrote above is not an accurate script,
View 4 RepliesI'm trying to make a basic true/false quiz in Flash.It involves a question with two radio buttons with instance names t1 and f1 (true and false).When the user presses check answers a movieclip with instance name yn1 moves to frame 2 or 3 which displays a tick or cross.
This is all working fully, the problem arises if the user presses check answers again.This for some reason turns the ticks to crosses and the crosses to ticks and I have no idea why!?My code is as follows:
import flash.events.MouseEvent;
stop();
checkAns.addEventListener(MouseEvent.CLICK, checkAnswers);
function checkAnswers (Event:MouseEvent):void
[code]....
How do you make the childAllowsParent property of an SwfLoader go from false to true, that is, how as a parent application do you set up security to make the child app's events and other properties accessible to you. To read the flex docs on this, one would think nothing could be simpler:
"This property [childAllowsParent] is set to true if the child object has called the allowDomain() method to grant permission to the parent domain or if a URL policy is loaded at the child domain that grants permission to the parent domain. If child and parent are in the same domain, this property is set to true . [emphasis added]" So, I'm in a development environment and want to load an swf from my own system via an SWFLoader and then be able to monitor its events within the parent app.
[Code].....
How do i trace a radio button component whether its set to true or false?
View 1 RepliesHow do I alternate a true/false state of a button, each time it is clicked?
View 1 RepliesI'm using Flash Cs4 with As3 to make a project. In part of it I have an object which is invisible, but when a button is pressed is made visible. Only problem is, it won't make it visible.
Heres my code
PHP Code:
import flash.events.Event;import flash.events.MouseEvent;aSettings.visible = falsevar setVisible:Boolean = false;buttonVisibility.addEventListener(MouseEvent.MOUSE_DOWN,function():void
[Code]....
I'm not receiving any errors at all, but whenever I click the button the output says "false", so I know that its not changing it to true.
CS5.5: Does animated movieclip still animate when visible=false?I'm trying to save as much processor resources as possible to reduce lag of an iphone/computer app.
View 4 RepliesI have a script that once clicked ( a button ) some other thing hides then once clicked again it re-shows. the problem is once hidden it never shows again here is the script:
menu_start.addEventListener(MouseEvent.CLICK, myClickFunction);
function myClickFunction(event:MouseEvent) {
// Hide the first and show the next here
if (menu_menu.visible == true){
menu_menu.visible = false;
} if (menu_menu.visible == false) {
menu_menu.visible == true;
}}
i have a tabbar with 10 button. when i change the some buttons visible and includeInLayout property false then tabbar size is not change..it is same as when it has 10 button
View 1 RepliesI've struggled with this for a long time and have thrown in the towel. How the heck do you climb the ladder, then go back down again into another clip?
View 2 RepliesI never get the hang of these.'
Code:
_global.web_link_activate = (wArray[this.id]);
if (_global.web_link_active == "no"){
_root.load_area.zoomer.enabled = false;
_root.load_area.zoomer._alpha = 20;
[Code] .....
That should work but it does not. it always says "yes" wArray is a drawn from an xml document.
XML is
Code:
weblink="yes"
Can I set vars like true and false in xml kinda like weblink=false??
I have this code on a movie clip:
Code:
onClipEvent (enterFrame) {
this.gotoAndStop ()
if (Key.isDown(Key.DOWN)) {
this.gotoAndPlay ()
}
}
But the problem is, when I let go of the arrow key, the movie keeps on playing. How could I make this work, so that the movie clip would go to the first frame when you let go of the arrow key?
Because this code didn't work:
Code:
onClipEvent (enterFrame) {
this.gotoAndStop ()
if (Key.isDown(Key.DOWN)) {
[code]....
I just don't know how to set the true and false statements.
I am having a problem with stage event listeners in Explorer 7 and up.I place an object, say a circle, on the stage in layer 1. I make it a symbol and give it an instant name of myBall_mc.I add a blank keyframe at frame 25 and create a motion tween moving the circle across the stage.I add a new layer, name it actions and place the following code in the first frame.
stop();
stage.addEventListener(MouseEvent.CLICK, onClick);
function onClick():void[code].....
Works perfectly when testing. Works perfectly when exported to a .swf in Firefox. Doesn't work at all in Explorer 7 and up.If I add a button to the stage and change the event listener to listen for a mouse click on the button, it works perfectly in all browsers.
Now here's the weird part. If I leave the script exactly like I have it above and place a box, the entire size of the stage, over the stage and set its alpha to zero. It works perfectly in all browsers. This is without even changing the event listener from stage to whatever I called the stage covering object.It registers as a stage level mouse click!
I've tried to add imports but this didn't change anything. I tried to add the parameters ,true and ,false to the stage event listener after the function name. Everthting I've tried comes up short. The only thing that works for Explorer browsers is covering the stage with an object.
How do you find a odd or even number using bytes instead of modulus op?
View 8 RepliesHow do you use config constants with values other than true or false? The only documentation examples I've found uses the syntax:
ActionScript Code:
CONFIG::CONSTANT_NAME {
//do stuff
}
But what if the constant is set to a value like "hello"? How can I set a block of code to only compile if the constant is set to "hello" but not "goodbye"? I tried:
ActionScript Code:
CONFIG::CONSTANT_NAME == "hello" {
}
Are you aware how to set a variable to true or false in AS3;
I tried
Code:
var flip:void = true;
But this is not recognized by AS3.
I've written a PHP-script that returns true/false.I use a URLVariables-object to send two variables to the PHP-script (actually a username and password).
View 1 RepliesI have a button that imports an mp3 and is supposed to load completely before playing. Problem is, when I set the loadSound to false it doesn�t play at all, but when I set it to true it does play. Here is the code:
Code:
carregarSons = function (som, numeroVolume) {
_root.som1.stop();
_root.som1 = new Sound()[code]....
What is the most simplified way to get flash to return True(1) if a variable is > 0, returns False(-1) if a variable is < 0, and returns nothing(0) if the variable is 0?
View 4 RepliesIm trying to pass values to a php. My problem is when I try to pass the value (true / false) of a checkbox. Its set to be false by default but the thing is that I have not found the way to pass the "selected" status to my php.
I have the ckbx inside a movieclip and on a button press I pass the variables (loadVariables) from the movieclip to php (POST) I would like to know how to obtain the current status of the ckbx and pass it to a variable in Flash to send it to php (the last i know how to do)
I tried using if(check1.selected == true) but it does not work one button called submit - does the obvious
check1 - instance name for the checkbox component ck1 - instance name for the var (dyn txt) i am using to get the value
I'm simply creating a button in flash that should alternate between a 'play' graphic (i.e. > ) and a pause graphic (i.e. || ) every time its clicked. That's all!
In shockwave I would simply type a line of code that would set a new memberNumber or memberName to swap the graphics on mouseUp. How do I do it in Flash? I called a friend and he though I had to do something like create a movieClip inside a button or vice versa. It all seems rather complicated for such a simple task.