CS5.5: Does animated movieclip still animate when visible=false?I'm trying to save as much processor resources as possible to reduce lag of an iphone/computer app.
View 4 Replieson frame 1 I've got 10 movieclips and each movieclip has a toggle button to make it visible true and false.
How do write the script to do the following on frame 10?
if only 1 movieclip is visible make one_mc visible true
if only 2 movieclips are visible make two_mc visible true
if only 3 movieclips are visible make three_mc visible true
... so on for all 10 hope this make sense.
Code:
my_Dyn_Txt1._visible = false
cb1.onRelease=function()[code]....
When the checkbox (cb1) is clicked the "my_Dyn_Txt1" is visible. The problem I'm having is - when I move forwad and back in my frames the checkboxes which were clicked are not visible due to
Code:
my_Dyn_Txt1._visible = false
How can I make ("my_Dyn_Txt1"), a clicked checkbox STAY VISIBLE even after I move forwad and back in my FLA frames?
How do make a movieclip visible false when a scroll bar starts to scroll?
//I tried this and had no luck.
this.onEnterFrame = function(){
obj_mc._visible=false;
}
I've struggled with this for a long time and have thrown in the towel. How the heck do you climb the ladder, then go back down again into another clip?
View 2 RepliesI have a combobox in a view that receives information about application state changes, and then is supposed to show or hide it's children based on the whole application state. It receives state change messages, it traces the correct values, it does what it's supposed to do, however, it just doesn't seem to work. Essentially, all it needs to do is hide a combobox during one state, and show it again during another state.[code]
View 2 RepliesI was just wondering is it faster and better practice to remove stuff that is invisible from the displayList.
e.g if i have 100 objects that sometimes are visible, sometimes are not. would removing the objects from stage give any speed boost compared to simply setting them visible=false;
Im trying to hide components and other stuff using either the
._alpha = 0;
or .visible = false;
although when its on a flash component it wont hide?
Im trying to hide components and other stuff using either the
._alpha = 0;
or .visible = false;
although when its on a flash component it wont hide?
I have an app that displays XML as items. I am taking the createLayout() and trying to create a class that i can call from my custom component rather than having tons of code in the same file. The issue i am having is that when i call it, and run/debug, the display objects (text,links,date..) all have their visible property set to false. This happens even though I set the property to true in my code.
package com.ryancanulla.utils
{
import flash.display.Sprite;
import flash.events.MouseEvent;
[Code]....
I'm loading data using multiple LoadVars. How do I evoke a mc to be visible=false; after all data are loaded?
View 4 RepliesI am working on a school project using arduino and flash.
I am using motion sensor to make a movieclip symbol visible and invisible. I want to play a sound when symbol.visible = true and then turn it off when it is false.
I tried using gotoAndPlay but it said the method was no long supported? so I couldn't do that.
Here is my code
package
{
import flash.display.Sprite;
import flash.net.XMLSocket;
import flash.events.DataEvent;
[Code].....
if i instantiate an object and say: myObj.visible = false;
is this the same if i say from my objects timeline (external as) this.visible = false ?
So i have my index.swf file with an mc called "loadingspace" (as instance) who appears on a 10 frame animation.
At the 10th frame i have placed this code:
Code:
var my_loader:Loader = new Loader();
my_loader.load(new URLRequest("http://www.mysite.com/preload/preloader.swf"));
addChild(my_loader);
[Code]......
Im using an animated movieclip to create a pulldown menu..the thing is that I want to anymate the buttons inside the pulldown as well..so I therefore used a similar movieclip inside the pulldown menu to make this animation
View 1 RepliesIf I have a MovieClip with its "visible" property set to "false", would it aid performance to "stop()" its timeline? Or will that have no effect, since its not being rendered, anyway?
View 3 RepliesI have a code similar to this:
<s:VGroup>
<s:HGroup verticalAlign="middle">
<s:Label text="label" />
<s:TextInput id="rmName"/>
[Code].....
I want that the s:VGroup container has the height only of its visible children. In this example there is a free space even the visibility mx:HorizontalList is set to false. Every time I change the visibility of the child element I want that the parent (s:VGroup) will change his height. How to do this in flex?
i try to toggle tabBarvisible = true/false with the following code:
protected function textArea_clickHandler(event:MouseEvent):void
{
if (tabBarVisible="true") {
[Code]....
but only can get tabBarvisible="true" and when i click again nothing happen. the tabBarvisible won't turn to "false".
I am trying to use the _visible property of loaded swf files to trigger the opening animations of these files to prevent the animations from playing before the preceding swf animation finishes. The problem is that the property of the loaded swf files read true when false and vice versa. If you click the link again, the property reads correctly (false when false etc). The onEnterFrame handler seems to be the issue, but I need it to read the property. The code is a bit lengthy, but I posted it for reference sake.
// the purpose is to unload the content and use the width property
// or visible property to trigger the opening animation
// of the next swf file
onSelfEvent (load) {
[Code]....
How can I "call" a screen tha first was visible="false" from a buttom on my first page usig flash form application?
View 4 RepliesIn Flex I've got a component, which is based on a Canvas.It looks like this (I removed the <mx:Script> for better reading):
<mx:Canvas verticalScrollPolicy="off" showEffect="showFX" hideEffect="hideFX" horizontalScrollPolicy="off" creationComplete="doComplete()" xmlns:mx="http://www.adobe.com/2006/mxml" width="63" height="63">[code]....
If I set customComponent.Visible to false, the component gets hidden (as expected). But doesn't trigger the hideFX at all. Am I doing something wrong? Or isn't this the correct way to use hideEffect and showEffect?
i have a tabbar with 10 button. when i change the some buttons visible and includeInLayout property false then tabbar size is not change..it is same as when it has 10 button
View 1 RepliesI have an intropage with two mc buttons that resides in another mc. They are for an English and a Dutch part. So when I click on either one of them, they go to the "Home" label (frame 2). But now at the same time when the main timeline goes to "Home" I want the movieclip container that contains 6 buttons (The English or Dutch ones) to be visible false or true when I click on one or the other. As a part of the code will show some of you there must be an 1119 error that I can't figure out. It has to do with the FrameLabel that is supposedly undifined. [code]If i remove the if statement and just put the visible statement that also gives an error.But maybe the conflict could be that btnTxtFrameN_mc nor btnTxtFrameE_mc exist on the first frame where I wrote the code and only appear as from label "Home" (second frame)
View 9 RepliesHere is what I want:
1) a sprite with a rollover/out tween, going from alpha 0 to 1 on rollover, and back to 0 on rollout (let's call it "containerSprite"). That part is cake.
2) another sprite within the container (let's call it "closeButton"), that goes along for the ride (i.e., its alpha gets tweened along with the container). That's easy enough to do by making it a child of "container". When I say it is "within" the container I mean in terms of x/y.
3) when I move the mouse within containerSprite and onto closeButton, I want the container to stay visible (easy enough by setting mouseEnabled or mouseChildren to false). But I want closeButton to respond to mouseDown events, so I can't set it to mouseEnabled=false, nor can I set containerSprite.mouseChildren=false.
4) there will be several other sprites within the x/y of containerSprite, each with their own rollover/out tween. The catch is, when the mouse is within containerSprite and rolls onto one of them, the alpha of containerSprite SHOULD tween out (unlike when rolling onto closeButton).
For the life of me, I cannot get it all to work. I can get the desired behaviour in (4) easily enough, either by making the other sprites (mouseEnabled) children of containerSprite, or by making them siblings of containerSprite but higher in the display list. But the desired behaviour in (2) and (3) is vexing me: if closeButton is a child of containerSprite then its alpha tweens along with containerSprite (desired), but because it must be mouseEnabled, moving the cursor onto it triggers containerSprite's rollout event (undesired). If instead it is a higher sibling of containerSprite rather than a child, it has the same problem: if it is mouseEnabled, moving onto it counts as a rollOut event for the container. It seems like the solution ought to be easy, and I'm just missing something that is in plain sight.
I've got a sprite which I want to temporarily hide... But changing the .visible property doesn't do what I expect. The code looks roughly like this:
[Code]...
How can I "call" a screen that first was visible="false" from a button on my first page usig flash form application?
View 4 Repliesif I have various items on stage that I want to appear later, is it better to set .visible to false than setting the alpha to zero? For instance, there is an object that I want to fade in from alpha zero to 100%...when the object is invisible, should I just leave it at alpha zero, or should I set the visibility to false to help with performance. Does it make a difference? Would it further help performance if I removed the object using removeChild when I'm done with it?
View 5 RepliesThis is the third thread I've written for my current project (1st was answered perfectly, 2nd failed [but I still figured it out anyways]) but I'm not sure if there is a solution to this problem. I can't really explain my problem, so once again I've included a helpful animation to show you what I mean. Bear in mind that the pale-blue box represents the movie clip's borders, and those borders are usually changed to include the animation (instead of the borders moving with the animation, the borders get bigger).
For the animation problem, I've already got a solution: create an invisible movie clip that has the exact size and shape of the animated movie clip and make it follow the movie clip as it animates, and make the hitTest check the invisible movie clip instead of the animated one. As for the rotation problem, well, I don't know how to fix it. Is there a way to change that?
I used the following code to read a file "images.txt" and build a movieclip by loading the images specified in the file.
I wanted to make this dyanmicaly built movieclip invisibe. i.e "setProperty (_root.preloader['part'+count], _visible, false);" line in my code below is not working.
[Code]....
I used the following code to read a file "images.txt" and build a movieclip by loading the images specified in the file. I wanted to make this dyanmicaly built movieclip invisibe.i.e "setProperty (_root.preloader['part'+count], _visible, false);"line in my code below is not working.
[AS]
var count = 0;
var offset = 0;
[code].....