ActionScript 2.0 :: Launching A Full Screen Flash Page?
Nov 29, 2005
i am trying to do a piece in flash and have figured out how to make it fun full screen...
now here's the problem, with Stage.scaleMode = "noScale"; on the first frame it doesn't really scale the swf...
what i really want to do is take Stage.scaleMode = "noScale"; out but then be able to see the swf play with out distortion... is that possible?
how do you go about retrieving the width and the height inside of the browser window and go about applying it in actionscript so the height is always 100% and the width is always scales proportionally so the swf doesn't get distorted?
View 2 Replies
Similar Posts:
May 11, 2010
I am creating a flash-based Kiosk. When launched, it runs full page/full screen. However, if a user clicks a button that opens an external document, the swf or Flash Projector exe leaves full page mode and appears in the Flash Player. Is there any way to ensure the swf or projector file always stays in full screen - full page mode?
View 4 Replies
May 1, 2009
Im looking for any help on creating a full screen flash page, which will be activated by a button Such as this tut [URL] However I have tried this but cant seem to get it to work. Would this be something to do with my publishing settings (currently on flash 9 - which it states is recommended) or the code in the HTML which again I have followed the tut and have added the additional code...
View 1 Replies
Jul 12, 2010
Is there a technique out there which might solve my dilema? I have a standard HTML content page which text and links on it then I want to put Flash over the top, on a layer, wmode set to transparent so you can see the HTML below. All fine so far, I can do this as you can see here -The problem is that obviously you can't select the HTML (ctrl+A) and worse, the links aren't clickable! Not good for accessibility
View 4 Replies
Dec 10, 2010
I am creating a full screen projector with flash CS4. In the projector I have more videos, starting from an swf player-
The problem I encounter is this:
The projector starts correctly FULLSCREEN (using AS). The video plays 900x506 correctly. If I click on the player, to get the video full screen, it works. But when I press ESC, not only the video, but also the PROJECTOR looses full screen.
This is a bit annoying. Is there a way to apply the "back to normal size" only to the video? I do not want to prevent the app to be exited from full screen, it's not a problem if the user wants to exit the projector full screen. But not when the user exits the video from fullscreen mode.
How to target only the video?
View 1 Replies
May 16, 2007
how I can make a 95% black MC cover everything on the website page (full screen onResize) so I can present an externally loaded image by itself? I have seen this done before in a few flash portfolio websites but I can't seem to find the solution on any previous thread. I may have missed some threads. is there an actionscript that can do all of the above without having to resize an MC?
View 4 Replies
Jul 9, 2011
I tested my skin for YouTube Chromeless player, and seems it worked properly.All graphic elements, including TLFTextFields, are stored in external SWF, all the AS3 code - in loading SWF.I use ProLoader class to load SWF.However, when I tried to attach Player skin code to my Home Page code, I immediately bumped into two issues:
1. TLFTextFields ceased to display proper font;
2. YouTube Chromeless player ceased to enlarge up to Full Screen width in Full Screen mode, whereas all publishing settings were kept the same...
Although I managed to cope with TLFTextField bug by replacing instances with vars in loaded SWF, I have no the slightest idea what to do with those paddings in Full Screen mode... Neither removing all children on stage before loading YouTube Player skin, nor compulsory resetting player's size can't make it work...
View 10 Replies
Aug 14, 2009
I have embedded an swf file (a parallax scrolling swf) inside an html page which I made in Dreamweaver. I would like for the swf to automatically be loaded in full screen view and take up the whole page - currently it sits in the middle of the page. I am linking to this from a previous html page.
View 1 Replies
Sep 17, 2008
I wnat to display a FLVPlayback full screen the same as when you click on the Full Screen component button.
function goFullScreen():void {
vidPlayer.enterFullScreenDisplayState();
}
var vidPlayer:FLVPlayback;
[code]....
View 1 Replies
Jul 28, 2011
i am wondering from this code, it makes the stage full screen, does it also makes the content of my movieclips scaled to full screen? i have tried this code and it does not seem to do that, how can i make my content to scale to fill a stage's full screen? i have a Movieclip containing a background with a class to make special effects on the background, i am having trouble making the background be "fullscreened" nicely with the stage.
View 1 Replies
Apr 7, 2012
I have a working MVC project.I want to include a page which displays images from database, in FULL SCREEN MODE.How do i go about this? Flash? SilverLight?
View 2 Replies
Aug 9, 2011
// for Full Screen stage.displayState = StageDisplayState.FULL_SCREEN;// for the normal screen stage.displayState = StageDisplayState.NORMAL;But this code does not fulfill my requirement. I need Vertical Scroll Bar, even I go to the FullScreen, but I don't find any Scroll with this code.Even I tried "window.open" of JavaScript with ExternalInterface, but I couldnot succeed.
View 2 Replies
Sep 29, 2011
i am creating an interactive application that will run independantly on a computer.I have implimented the full screen stage display state to a btn, and it works great!
-------code-----
import flash.display.StageDisplayState;
function goFullScreen():void
{
[code].....
however as soon as i add a video [i will be adding several] the video takes on the full screen property, and that is not the desired effect.I have used several diff ways to import the video but as soon as i call the full screen, it goes to an all black screen.
View 1 Replies
Jul 17, 2011
I have an AIR application that will go full screen when the application starts:
stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE; The stage size is 2560 x 1024. And I have 2 moniters (1280 x 1024 , 1280 x 1024) When I start the application, it shows my application on one of my moniter only.
I need the left side of the stage to be shown in moniter 1 and right side of the stage to be shown in moniter 2. Currently, both sides are shown in moniter 1, and in moniter 2, it shows nothing but my default desktop. *The blue color line is a divider for better visual purpose. How do I make the left side of the stage to appear in moniter 1 and right side of the stage to appear in moniter 2 when the application starts in full screen mode?
View 10 Replies
Oct 27, 2009
Is a command for AS2 to make my movie file play fullscreen (stretch, fit to screen, anything).
goFullScreen(); is great but it leaves white bars left and right. What's odd is that I'm using Adobe Flash Media Live Encoder and it seems to display a perfect widescreen that I want as an input and output but once compiled in flash, it's more square leaving me with white bars left and right. The frame for the video in flash is also widescreen looking.
edit: I ended up stretching the width of the frame but if there is a better way through a command that would make my life easier so I don't have to adjust to every monitor that I run this on.
View 0 Replies
Feb 11, 2009
My question is what needs to be done in order to make a .swf file go into full screen without falling to a black screen when a movie is played? I have tried coding it, however I come up with the following error.
[Code]....
What should I do to fix this? This is not going to be an HTML file, however, so the initial thought of changing the publish settings does not seem to work this time.
View 9 Replies
Apr 24, 2006
I'm creating a flash site. I want the flash movie to fill the entire browser window. What size should I make the canvas, I've been experimenting with sizes and a canvas size of 750*370 fills my browser well on a resolution of 800*600
How do you accomodate different resolution settings? What's the most commonly used canvas size for this type of project.
View 2 Replies
Jun 4, 2009
I am using AS3 on a website. Part of the AS has been setup by an external source and I ma now updating and adapting it. My knowledge of AS is limited but slowly expanding.
Currently the site is a main flash file with all the content delivered via a main.as file and then populated via images and videos held in folders on the web.
In one section we have an email link.
I was using Email[url]... and it worked fine. It launched the email program and put the email address in ready to go.
When I added the subject element as below[url]...
it now does what it should with the email program but it also opens a blank webpage.
What can I do to get rid of the blank web page opening?
View 4 Replies
Jan 9, 2007
I have a bunch of buttons. That when pressed call a seperate function. I do this so that if I wanted to play a video, I can put a command at the end telling it to launch to a new page automatically. Sooooo, I'd do this:
[AS]btn1.onPress = function() {
page1();
};
function page1() {
//dosomething
};[/AS]
Is there a way to give an onPress/onRelease function a command that can be called, without having to write two separate functions?
View 6 Replies
Apr 1, 2010
I am working in Flash CS3 and Actionscript 3.0 My application resizes according to browser width and height. If the user first resizes the browser and then loads the flash application, I could not get the full browser width untill the user goes for full screen. Is there any way around, to get the full browser width before the user goes for full screen.
View 1 Replies
Dec 11, 2011
i am a beginner in action script / flex framework and i am facing a problem: i would like to have like a menu bar always anchor the bottom of the screen in normal and full screen mode... i try to set my component with bottom = "1" (so it should alway be at 1 pixel from the bottom of the stage ... But .. NO :)
[Code]....
View 1 Replies
Nov 5, 2010
I have a flash app that contains a lot of data. Part of it has a video. I want to have an option to expand just the video to full screen mode. I have this working now, however it scales it proportionally based on the size of my flash app. Instead of doing that, how can I expand it to be 100% of the screen width?
Code:
function goFullScreen(base):void
{
if (stage.displayState == StageDisplayState.NORMAL)
[Code]....
View 5 Replies
Jul 24, 2011
I've been trying to attempt to make it so a .flv video will fit to the entire screen of the browser window. ( I already have my .swf file fit to re-size to any browser on any computer. I just can't figure out how to make the video as well) And obviously an external video so the flash file wont take forever to load.The point is this is to be able to have the Video be the background. So I may put content (Links, information or whatever else) on top of the video.
View 2 Replies
Jan 20, 2009
[ X ] Problem solved I just came up with something i have some trouble to handle I've tried a couple of solution but none seems to work perfectly
What I'm trying to do is simple, get my flash to go full screen, but whatever resolution the user has, my flash must centers itself with the biggest proportion possible, and two movie clips goes right and left of it, as if they were borders.
I've been able to do this with a simple png, but i was not able with a movieclip where his dimension changes through time. ( i have a tween, so the mc gets really big even though just my stage is displayed)
View 1 Replies
Sep 9, 2009
I encountered on the building of my largest flash project to date. The project is a dvd-based presentation with audio, video and text that's xml driven.The project has been coming along nicely but recently a bug has popped up that I haven't been able to figure out. Here's what's going on:
There are three main sections in the swf, the intro screen, the main screen and the content screen. The swf is set to default to full-screen with the resizing and re-positioning of the elements built into a resize handler. Since each screen has different content, each screen has a different resize handler that is removed when transitioning to the next screen before the resize handler is applied for that screen.
For the first two screens, everything is working fine, but when you get to the content (third) screen (where the xml loads), the entire flash movie darkens, and nothing is clickable. This only occurs when the swf is in its default full-screen mode, if you escape full-screen the screen goes back to normal and the nav is clickable again. Also, if you've escaped full-screen mode before you reach the third screen, it remains normal and clickable.
I initially thought that it might be an issue with the event handler for the fullscreen, but the bug never appeared in previous versions with the same code. So I replaced the fla file with one that was not causing the bug and got a functioning swf out of it, even though it was including the same as3 files that the buggy file was including. I saved that file and sent it to the client, who has been successfully publishing from it without a problem. So I thought, problem solved, just a corrupt fla file. But now, any version of the swf that I publish has the problem, even ones that published fine earlier, and aren't using any of the new code that was being used when the problem started occurring. is it possible that my flash app has gotten corrupted or something? Has anyone ever experienced anything like this before?
View 4 Replies
Nov 29, 2005
We have created a standalone exe (flash with windows/mac "projector") file, and have it set to autolaunch when a cd is inserted, but would like for it to launch in full screen mode
View 6 Replies
May 26, 2011
I have been using this script for a while now to display images fullscreen but also so they scale:
ActionScript Code:
function setBackground():Void {
picHolder._width = Stage.width;
[Code].....
However I have recently needed to publish a project in flash 8 (not 7) and the image quality is really pixelly. Image quality is paramount and I the script above offers me that. How can I get this in flash 8?
View 9 Replies
Nov 8, 2006
just wondering how you would make your background repeat in flash (by the _y value) i know how to do this via css in html...but in flash yeh not a clue?? and also how to have your footer stick to the bottom of browser??
View 2 Replies
Oct 5, 2010
I was following this procedure from many months:
[code]....
Chrome works fine with these setting but now problem is with IE I just updated my Internet explorer it shows half of the flash file what need to do?
View 1 Replies
Dec 17, 2010
Been re-working a couple flash as3 movies that are to be exported as exe and app.They call in a few external flv's, swf's, and a few external images.Now, the old versions were kindof a mess, so I have been cleaning it up, and got it mostly down to a single frame, with no objects on the stage until I call them out via action script from the library.So far so good...At the top of my as is the line:
this.stage.displayState = StageDisplayState.FULL_SCREEN;
In the old versions this worked fine, but now in my re-worked version, the screen does open in full screen like it is supposed to, but the items on my stage are not expanding to the full screen size along with the stage itself.
View 2 Replies
