I have 2 (vector roundtangle) movieclips on the stage both with scale9 enabled. When I tween them, scale9 only applies to one clip and not the other. I'm using mcTween but this shouldn't make a difference.
View 1 RepliesMy XML isn't exactly doing what I want. It's putting a lot of 'undefined' entries in my Flash file and it's not updating correctly and I don't know why it's doing that.Top square is add entry to XML, button square returns to the 'room'.
This is my Script:
ActionScript Code:
package
{
//Import Stuff
public class AddQuestionMenu extends MovieClip
[code].....
I have it up but the buttons that activate the motion tweens aren't functioning. Also it seems that some images are not being loaded.
[URL]
I published the FLV file and it made the HTML and JS files.
I have the following code:
//////////////////////////////////////////
//http://forums.adobe.com/message/3450898#3450898
//square_mc.y property edited by kglad AND NedMurphy both
// but kglad introduced the yGap variable, allowing for
[Code]....
The bold entries are where the Tween class is declared and I expect it to behave smoothly but it is lagging in its response to the mouseOver event and mouseOut event.
Can anyone test this out on their system and see if they are having problems as I am? Basically as the mouse hovers over an active target the scale of the active target in X is supposed to change from 1 to 1.2 times the original scale in X and vice versa when the mouse goes out of the active target.
I have a button that is housed inside a movieClip. That movieClip has the following AS3 code:
[Code]...
So I'm just curious if this is a known glitch in AS3 or CS4. Or if this method of using SoundChannel within a movieClip is no-no and why.
I have some sections that look for a (delayedAction) button press of >1 second or else it goes to a warning keyframe on the timeline. Once at the warning frame it stays for a couple seconds (slideIntervalNum) and then continues playing to the next frame which contains a variable telling it return to the initial frame it was at.IF the user taps the button for <1 while at the warning frame they back up another section in the timeline. This is all what i planned for but.
button for less than 1 sec and quickly moves back towards the beginning of the animation / timeline at some point something happens that makes it so that it does not want to obey the stop(); command at all! It will keep playing forwards frame by frame when no action is taken. And even if a button press of >1 sec is executed to stop and go to the next frame it still wont obey the stop(); command!!!some of my code that i am using:
//AT STARTUP:
stop();
var timeOut:Number;
[code].....
im currently working on building a search app which allows filtering of a list of products.
NOTE: shift+leftClick to drag and reorder the lists, just left click to use scrollbars and buttons.
[URL]
here is a preview of the stage as it is at the moment.
when the scroll pane is created (dynamically) i also create a new instance of my own class which is as follows . . . (the content for the scrollpane)
ActionScript Code:
package {
import flash.display.*;
import flash.events.*;
[Code].....
holding shift and clicking allows you to drag the scroll panes into a different order. clicking one button in each of the scroll panes works fine. if you try clicking a second button in either of the scroll panes you will notice you have to click twice.
I'm creating my first website. I've managed to create a homepage. On the homepage is a enter site button, which once it is pressed starts thetimeline... I have an actions/labels layer which I am writing my code in. On frame number 'one' is my code below.
stop ();
enter_site_btn.addEventListener (MouseEvent.CLICK, buttonClicked)
function buttonClicked (event:MouseEvent): void
[code].....
I am using Flash CS4 and AS3. Can anyone advise me why my links work perfectly well when I use "Test Movie" - and yet don´t function when posted on-line via Dreamweaver 4?
View 3 RepliesI've got the following code, I am trying to appendText to the same text Field (instance name = info). Problem is it seems to be ignoring the if statements and just outputs the last else string only.
import flash.net.URLLoader;import flash.net.URLRequest;import flash.events.MouseEvent;import flash.display.Sprite
crabBtn.addEventListener(MouseEvent.CLICK, ldr1);kidsBtn.addEventListener(MouseEvent.CLICK, ldr5);[code]....
I tried to create a simple progress bar by adding the ProgressBar component to my library, renaming it to "progressBar" and giving it an instance name of "progressBar" as well as adding the following code to my main class:
PHP Code:
package {
import flash.display.*;
import flash.events.*;
import flash.display.Loader;
[Code]....
I built this site about a year ago for a photographer. I am on a Mac, and she just recently started complaining that the site doesnt work on her PC. She says that after the home page, and page that she goes to gives her an error message? I dont have a PC to look at. Could it be something with IE7 and my Flash detection script? URL...
View 10 RepliesCode:
var cityArray:Array = new Array();
cityArray[0] = "southland";
cityArray[1] = "otago";
cityArray[2] = "westland";
[code]....
What have I done wrong? I'm trying to give each mc it's own number based on the name position in the array etc etc - It returns 18 for all of them when I click them one at a time.
I am have problems with the removeMovieClip() function; I have tried several methods to get the function to work. see below
Code:
newThis.removeMovieClip();
newThis.unloadMovie();
unloadMovie(newThis);[code].....
I am having an issue in getting flash to call my PHP script and then get the variables back into flash once the PHP script has queried a mysql database. I have tried to chop things in the php script down to their bare essentials. I am new to AS3 so I am having some trouble integrating the two. I know that my DB info and querying works so it must be something with passing data between flash and PHP.
import caurina.transitions.*;
import fl.controls.DataGrid;
import fl.controls.ScrollPolicy;[code]........
I have a TLF Read-Only Textbox. I have given the text box an instance name and attached a MOUSE_OVER and MOUSE_OUT listener to it.
On mouse over: Displays a value with the .text property. On mouse out: Sets the .text property to ""
The textbox functions correcty as I move the mouse onto the textbox area; a value is displayed. However, if I hover the mouse over the actual value, the mouse over and mouse out listeners get activated repeatedly in sequence. Is this a bug with AS3/cs5? Is there a way around this?
[Code]...
I had the buttoms working but as soon as i converted them into movie clips to spice them up they don't seem to excecute the button anymore, im using the code from voetsjoba tutorial transitions between external swf's
View 3 RepliesI have a flash file with a MC "wmc" which contains the following script to randomize labels on load as well as for next and prev buttons to function. I used the prev/next btn scipt in a previous file but for some reason the buttons are no longer functioning in this one. I must be missing something elementary. The actual file is available via the following link (see the "workmc" MovieClip in layer "wimages"):URL...[code]
View 2 RepliesI am making my website by loading each of the external pages in to the main swf file. I've used a tutorial and it manages to load all of the correct pages when the corresponding button is pressed, however I can tell that the Unload isn't working because each page has audio and I can hear them playing over the top of each other when I navigate through the pages.
Here's the code.
Code:
var Xpos:Number = 0;
var Ypos:Number = 102;
var pageSWF:MovieClip;
[Code].....
When I embed a swf it does not function the way it does when not embeded. I don�t no what the problem could be. Here are the links and source code below. The scroll bar on the bottom does not function and the 360 click and drag of the photos does not work.
Code:
//******************* Scroll Functions for Large Images *******************************
var maxSpeed:uint=50;
[code].....
I have created flash buttons for one of my websites but they do not work properly. Unless there is a (www) in the URL the buttons do not work. For example,If my address reads [url]...the buttons do not send you to the page when you click on them. However, if you go to [url]... the buttons when clicked send you to the pages.I have set all the links to [url]... but that does not stop a user to navigate to the site using [url].... instead of [url]....
View 23 Repliesnew to this and need a very basic push in the right direction.I have FMS 3.5 installed on my server and I am ready to begin testing with it.My website has a page with descriptions of videos and links to those videos.When a link is selected, I want a new page to open and the video to play in the FMS player.I have absolutely no idea how to go about this. I need some meaty information here. I read tom Green's tutorials, and although I found that they were informative, they are also quite general.
View 6 RepliesI use the AS3.0 stated below to control a simple Flash play/stop button to play/stop a mp3 on a webpage. Since I am using about 15 of those players on one page and a lot of visitors are to lazy or unaware to press 'stop' before clicking 'play' on a next player, a 'stopallsounds' would be great: so, whenever a play-button is clicked all the 'earlier' sounds will stop playing.
So, the buttons seem to work fine but the line "SoundMixer.stopAll();" in the playfunction paragraph is not doing what i want it to do; other/earlier sounds just keep playing.
[Code]...
I have the following code for a text input box. I want it so if you type in a specific word it does one thing, if you type in something that doesn't have its own action it brings up a message.
ActionScript Code:
var attempt = 0;
password.onSetFocus = function() {
password.text = "" };
listenForEnterObject = new Object();
listenForEnterObject.onKeyDown=function(){
if(Key.isDown(Key.ENTER)){
[Code] .....
I had this working fine when I had just the one correct word but since I added the second correct option, "option2" when I type in "option1" it both does what its supposed to do AND runs the "else" script. "Option2" works fine.
The reset button on this file doesn't work. In fact I was puzzled about why it had disappeared and it is there but the wrong size (see large navy blue shape in the lower right hand corner of the stage?) When you click this shape you get this error:
ArgumentError: Error #1063: Argument count mismatch on AddATree2/onReset(). Expected 0, got 1.Not sure what that means because I can't find any arguments in this function.This should work so that the text and polygons disappear when the reset button is clicked so you can do this again.Here is the code and the fla is attached. (There are three files inline: Reset.as Tree.as and AddATree.as. See attached .fla AddATreePrototype.fla)
AddATree.as
---------------
Code: Select all/* AS3
Copyright 2008 __MyCompanyName__.
[code]....
Is it possible to have two buttons functioning at the same time?
For instance, let's say you've got a dynamically generated list, with clickable items, that you want to disappear when the user mouses off of it...
The way I have it set up now, the list exists on top of a large invisible button with something like
[AS] on(rollOut){
removeMovieClip("ludacris");
}[/AS]
The list items also have buttons so that when you click on them, they do some things... but when you mouse onto them, the "rollOut" button is triggered and it goes away.
So, is there a way to have two buttons functioning with one on top of the other?
I have an onLoadProgress function (AS2) which is working locally but not when uploaded to the server.
[Code]...
the p_text.text is being updated(as expected) when tested locally in simulate download mode, but when I test the same swf from the server, I am getting a blank instead of the percentage updated number, then when the code gets to listener.onLoadComplete, everything is going back to normal.
I have the file which plays my need smoothly as i wish but only in publish settings of Flash player 5 in AS1.But in same i didn't have the option like Text (Anti-alias for readability) and the quality of the output also low. If i change the publish settings to Flash Player 8 and same AS1 the seek are not functioning. I have attached the source file.
View 8 RepliesIs it possible to have two buttons functioning at the same time? For instance, let's say you've got a dynamically generated list, with clickable items, that you want to disappear when the user mouses off of it...
The way I have it set up now, the list exists on top of a large invisible button with something like
[AS] on(rollOut){
removeMovieClip("ludacris");
}[/AS]
The list items also have buttons so that when you click on them, they do some things... but when you mouse onto them, the "rollOut" button is triggered and it goes away.
I have a series of MC's (ultimately about 55) which I'm performing some actions on when a user hovers over the MC.
Code:
var items:Array = [
UnitedStates,
Brazil,
[Code].....
All my variables and paths test correctly; but, when I test the swf, if I hover over _level0.item_0, _level0.item_2 is the MC that received the actions. As I add more MC's, it's always the last MC that receives the behavior. To clarify though, the _visibility and _alpha values do set themselves for all of the MC's. It's just when a user hovers over _0 and _1 that nothing happens to the clip being hovered and _2 receives the order to execute the tween.