it will stop if num > 10 or if you press a button called clearInt_btn.Problem is if the interval stops running and then I press a button called startInt_btn it's impossible to get it to stop again.[code]You must clear the interval when you have finished using the function. Create a button called clearInt_btn and use the following ActionScript to clear setInterval():[code]
View 2 RepliesI am not sure whats going wrong where but something is because the setInterval continues to run after maxCount has been reached.
Basiclly it's a slide show feature.I am not sure whats going wrong where but something is because the setInterval continues to run after maxCount has been reached.Basiclly it's a slide show feature.
Code:
count = 1;
maxCount = _parent.imgCount;
function loadimg (imgNorm) {[code]....
I think it my coding. I am not to familiar with setInterval.
I'm using an ASP.NET server side control for playing mp3, of course I can use javascript or flash controls for doing so, but my problem is that I want the music to be played only once (at site start up), and its playing should continue when user displays new pages, I've used this control in master page, I don't want the music to be restarted whenever a new page is loaded?
View 1 RepliesI have a movie clip loaded on the stage.
The stage loops through a few clips so this one gets removed and added to the stage again and again by itself. How can I modify the contents of it on each loop iteration?[code]...
I'm having a very frustrating problem with FMS. A stream recorded on the server-side won't play until I restart the server.
The user flow I'm currently working with is:
1. record webcam stream
2. close the stream
3. call FMS function to post process the stream
4. FMS joins the recorded webcam stream with two pre-recorded videos and stores as a new stream
Then, knowing the new stream name, I'm trying to play it. However, I'm always seeing its last frame and it doesn't play. Surprisingly, restarting the server and re-connecting to it helps, then I can play the stream.
So I wonder if (server-side):
var stream = Stream.get("streamName");
stream.record();
stream.play(...);
stream.play(...);
stream.play(...);
im looking for how to remove a setInterval. i searched but the answer which was supposed to work dident for me.
[Code]...
We run about 20 FMS servers through Amazon AWS using the Adobe AMI: fms-4.0.1.8011-centos-5.5-ami-1 (ami-6a1deb03)On some of the servers we get fmscore segfaults, which kills the apps instances and make it impossible to launch new app instances. I am having a hard time finding out whether this could be due to errors in our code or if there is some kind of instability in the FMS. It does seems to happen only on the FMSs that are most heavily used.
var/log/message
Jan 7 17:09:15 domU-12-31-39-18-08-75 Stream[30456]: Bad network data; terminating connection : chunkstream error:message bytes 128 are more than the specified message length
[code]....
I have researched this issue all over and most people say use the .refresh() method to update a datagrid after updating or adding a new record. This does not do anything. So, my issue is this. I have a mySQL database hosted I am connecting via PHP, I have 1 mxml file and 2 php files (I know I can use just 1 but I am learning and this was easier for me to use for troubleshooting). The issue is no matter what I change on the datagrid the update does not show on the datagrid unless I close out of IE and reopen it. I can refresh or open the page in another window and the update does not show. I have to exit entirely and restart in order for any updates or additions to show.Here is my licenseTracker.mxml
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
[code]....
I have updated the mxml code to only show the needed code for the program to run the update.
I am new to Flex and have an issue I hope you all can help me out with.
I have researched this issue all over and most people say use the .refresh() method to update a datagrid after updating or adding a new record. This does not do anything.
So, my issue is this. I have a mySQL database hosted on 000webhost.com, I am connecting via PHP, I have 1 mxml file and 2 php files (I know I can use just 1 but I am learning and this was easier for me to use for troubleshooting). The issue is no matter what I change on the datagrid the update does not show on the datagrid unless I close out of IE and reopen it. I can refresh or open the page in another window and the update does not show. I have to exit entirely and restart in order for any updates or additions to show.
Here is my licenseTracker.mxml
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
[Code].....
I want it to while still easing into place like the iphone does. For example my stage is 550px. The drag and throw MC is 1650. That's 550x3. If the first image is showing starting at x axis 0 and you drag to the left it will ease into place stopping and showing the second image stopping the image at x axis 0. And the same thing scrolling to the next one and scrolling back. So the code is below and I've attached the movie that I'm working on.
[Code]....
flash pro. as 3.0.animation . almost no codes except ends of scenes having :
import flash.media.SoundMixer;
if(SoundMixer.areSoundsInaccessible() == false)
{
SoundMixer.stopAll();
}
[Code]...
i got this scene, with this specific bgm , individual frame layer. and the sounds at another layer. what i want is to stop the sound without stopping the bgm . (yes, i know the above code wouldn't work as it stops all sounds)
I am making a character walk. This code will make him wobble to the right and when thats done it will trigger him to wobble to the left and then call the function again to continue the loop.I can get the loop to work fine by calling the function but how do I STOP the function? Also I want to call it later on. Is there a way to start and stop a function?
function wobble()
{
var ws = .1;
var dis = 1;
[code]....
i use as2 and i want to know how to use setInterval
Code:
var pistolshottime:Number = 1
var counter:Number = 0;
var interval:Number = setInterval(pistolshottimer(),1000);
var pistolshottimer : function(Void){
counter += 1;
[Code]...
pistolshottimer is the period between shots and i just want to know why this doesnt work it says "an identifier is expected after the ':'" and it says after pistolshottimer
how to use setInterval. I think this is what I need to use to do what I want to do, as shown in the ActionScript (2.0) I've pasted here:
bhold.buttonBlue.onPress = function() {
if (ohpNameRed._y == 0) {
MoveNameDn(ohpNameRed, 60, .3);
//i want a second or so delay before the following code is executed MoveNameUp(ohpNameBlue, 0, .4);
[code]....
Wondering if there's anyway this can be done? Or is there anyway you can return the time elapsed since the last function call?
Reason being that I'm using it in a project that really requires the option to pause the game. So I'd need to "pause" an interval when the game is paused and then resume it from where it was stopped when the game is resumed.
I'm in a project where I have to use setInterval to go to a certain frame after a period of time when hovering to some thing in my stage.
The code used is :
setInterval( function() { goToAndPlay(34); }, 100000;
stop();
The problem is that the counter is always engaged will not always go to the frame after exactly 10seconds, it will be random because it never stops counting.
Is there any way to clear the counter after each time I hover to the thing??
Flash CS3 ACS1,2.
I am working in an image scroller. Now i need to add a new feature. ie, To pause the scrolling for a specified time after each image scrolled out from the stage. But I have implemented this using a setInterval and clearInterval. But there is an issue occuring in this case. When the image pauses, a gap is occuring between the last image and first image of the scroller. Also when the scrolling continues this gap is also increasing. When the first image scrolled out, it will be again appending with the images scroller. That means it's appending after the last image of the scroller. Thus first and last images comes next to each other. When the scroller pauses, the gap is occuring between the first and last images. Anybody have idea about this.
View 4 RepliesI have a flash 9 app that calls a php script that in turn pulls in some variables from txt files. The function within the flash file that calls the php script operates via a setInterval() function. For some reason, this works fine in Firefox and Safari, but in IE the swf fails to update the fugures unless i clear the cache and reload the page..rather than the setInterval() function doing so every 60sec...
View 0 Repliesseems that my clearInterval is not working i want to make the setInterval only call the function once and stops
here's my code
Code:
createPortfolio = function (portSource, portLength) {
// clearInterval(_root.intervalID);
this.created = false;
[Code].....
is it possible to create a progress bar which shows the progress of a setInterval?so if ive used setInterval(foo, 4000); it will "load" up to each function call...
View 7 RepliesIs it based on framerate or something odd instead? To get a two second delay I have to set it to 1000.
View 2 Repliesfunction onLoad(){
trace("Calling SetInterval");
setInterval(this,"resizeImage",1000);
[code].....
I have an MC (my_mc) with a button inside (mybtn_btn). Now I make something like this:
ActionScript Code:
my_mc.mybtn_btn.onRollOver = function(){
_root.showBubble();
[code]....
This doesn't work, of course. The bubble is removed, but not the interval. How the heck do I remove that interval?
i am trying to trigger a function after a certain delay, which is why i used setInterval. i can get the function to happen after a certain time, but clearInterval doesnt seem to work it always worked before, when i was not writing it in oop, is there something special with this function when it's used in oop?[code]
View 5 Repliesok what i have is an array that I want to display each image once when the page loads.so I tried the following, in in the init I called the function
[code]...
where the function setIcon tweens to the appropriate i in my array.When i go to publish this it doesn't ever activate the function playSlideShow, i tried activating it directly and it works, but i cant get a delay to it.What I want is for the swf to load, wait two seconds then activate setIcon(2).
I can't see why this setInterval isn't working ..basically I want it so a new instance of the same image from the library gets placed on stage at various time intervals at a different alpha level each time ... >
Code:
var myInterval:Number;
var number:Number = 1000;[code]............
What I'm trying to achieve is that I'm planning to fetch data from an XML file in certain time sequences. For this I would need a simple function that has a growing variable. I tried to test this as a text field that would show my variable go from 0 to 2 with one second between each change - but I can't get it to work.
[Code]...
gotoHell = setInterval(gotoAndDie, 1000);
So how i can addEvent for that interval to show it on progress bar? users can know the internal progress..
I have some trouble about a setInterval not being cleared.I made an index-intro.swf file that is being loaded into _root.mccontent.This index-intro.swf has got the following code with a setInterval in function firstimage:
Code:
function loadXML(loaded) {
if (loaded) {
[code]....
I have four photo's witch I want to change with a fade transsition. Idon't want to do so with tweens but with AS. I think it has something to do with setInterval, but I don't know how to realize this.
View 14 Replies