I want to I am building a stadium seating application. A person can choose a seat on a layout of the stadium and it loads a pic of the spot where they are seated or they can use a drop down menu (ComboBox). How do I synch up the button and combobox?
View 1 RepliesI am working on a cartoon and the sound synchs up fine from regular frame to frame. But it won't synch when I want the sound to synch up with the end of a motion tween.URL...
View 1 RepliesI have created a bouncing logo (similar to a screensaver). The MC loops and I have added some motion trail using dupe mc's, however when the main MC loops back to the start, the motion trail seems to go out of synch and fall behind in its positioning. I have attached the FLA to show you what I mean and you can see the AS that I have used.
View 2 RepliesI have a video that consists of an imported FLV to thetimeline so I could put a new background behind the alpha-channeledbackground of the movie and put other thingsin front of it. When Iexport as SWF it plays just great. However, the download is akiller over DSL speed connection, so I thought I'd try making thefinished product into an FLV. To do that I have to export as QTmovie first, then from QT Pro export to FLV. It loads much quicker,however the movie's video and audio get out of synch by the firstminute (it's 4 1/2 minutes long), and by the end it looks terrible.
View 2 RepliesI have 2 movieClips loading images using XML files.
I need to set the position on this movieclips from the parent depending on their width.
The problem is that the parent have to wait that both children have loaded the images before to proceed.
I have a to movies on the timeline. And they are playing at different speeds depending on the processor available on the computer, so the get out of synch with each other, is there a way to lock the rate at which the movie symbols animate so that they never get out of synch? Wish I was able to be mare articulate, not exactly sure how to ask the question
View 3 RepliesI'm working in Flash CS3. My animation is about a minute long, with a single audio track that plays from beginning to end. The sound quality is noticably better when I set the synching to Event, but unless I set it to Stream the sound falls behind the animation. Is there any way to maintain proper synchronization with the Event setting? Also: will the lag be consistent on different machines and players? I thought about adjusting the timing of the animation so that it matches the Event-set sound in playback, but that's such a clunky a solution it seems likely to cause other problems.
View 2 RepliesMy movie is five about minutes long with audio and an offscreen timeline move clip containing action script to control other movie clips or play the root directory. After about a minute or so, movie clips get out-of-synch with the audio, apparently its getting bogged down. My swf file doesn't seem that big, about 2.2MB and my move clips aren't that complex, although up to three levels deep.
View 3 RepliesI have swfs for every letter of the alphabet containing a story and a song. And one swf as a loader for each letter as requested from a menu. These are then published into html.
Every file is working as normal individually and when loaded in the loader swf.
But when viewed in a browser the audio karaoke for the letter I is out of synch. and only the letter I. this happens locally and online.
The I.swf file individually and when opened in loader swf work fine. Its only happening when viewed with a browser (IE and Firefox)
all the audio are mp3 loaded from external files. But Ie also tried placing the audio in the swf timeline but the same problem occurred.
A co-worker thought it might be the file size or bit-rate of the mp3 but thats not the case because all the audio files are the same compression and bitrate The file size of the audio or the swf are not the largest in the collection either. So this rules out swf/mp3 file size and or mp3 settings.[FONT="] Im really stumped by this, because every other letter works fine, and as far as I can see they are all the same settings.
I have a 5 minute flash movie that has great sound synchronization with the motion when I export as a SWF. However, when I export as a Quicktime file (.mov), sometimes the sound is ahead of the image. Is there a setting I can tweak during Export to remedy this? (so far I have tried to save the Video as "H.264" as well as "Animation". And for sound I have had no luck with the setting of "None" or "Apple Lossless."
View 2 RepliesI have a combobox (called "style_cb") and as you might have guseed you can use it to select a "style".The site also has pictures and I'd like users to be able to click the pictures (which are buttons) and have the comboboxautomatically set to that option.So, if the options in the combo are "oranges, apples, pears, cherries" and the pictures are of the same fruits,then clicking on a picture of a fruit (let's say "cherriesBtn") would set the combo box to that option.
View 1 RepliesI'm about as new to flash MX, how to write an action script that will allow me to change text with a button. However, I would like to be able to do it by a combo box. In other words, I would like to make it so that when you change the combo box to a different label, the text field will change to a different outside text file.
View 6 RepliesI have tried to work on a simple form with Flash Builder 4, but was stuck in creating the dynamic addition of the instance for a textbox and combobox within a Hbox.I have created an HBox component with a textbox and a combo box. I then create a button Add new Row, to add a new row of Hbox on the runtime.
May I know how can I create the add to make it able to add new hbox component on clicking of the button, such that when i click the hbox 3 times, I should have 3 rows of the component instance and the button is still at the bottom of these components?
I'm using Flash CS3 and want to create a custom ComboBox. I've followed the steps outlined in "Editing component skins in a new document" (http:/[url]...), but every time I get to the step where I drag the ComboBox Assets folder from the HaloTheme.fla library into my library, if I test movie at that point my combobox has become an unclickable white rectangle with no label, button or anything.
View 2 RepliesI'm trying to set a specific list item in a mx combobox to have a custom item renderer, the problem is that I cannot do this via mxml, it needs to be done via actionscript at a later stage, eg: combobox gets created, combobox gets populated, user does other tasks, combobox needs to set one or more items in the combobox to have icons (via item renderer)..
I can do this via the onChange event, but it only applies the icon when the combobox is opened and there is a slight delay so you can see the icon being added.
How can I validate there's a selected item in a ComboBox before saving? If there's no selected item, how can I set focus on the ComboBox?
View 2 Replies**Warning** The linkage identifier 'ComboBox' was already assigned to the symbol 'ComboBox', and cannot be assigned to the symbol 'GUI MC/Combo Boxes/abc', since linkage identifiers must be unique.**Warning** The linkage identifier 'ComboBox' was already assigned to the symbol 'ComboBox', and cannot be assigned to the symbol 'GUI MC/Combo Boxes/def', since linkage identifiers must be unique.
Both of my ComboBoxes has the same identifier.I could not change the identifier through the properties tab because it is greyed out.
I want to populate a ComboBox after a clicked a button.
[Code]...
But when he executes the last line, I alwas get the following error:
[Code]....
I need to access the combobox child (textinput and button) without creating a customize component. I know the best practice is to create a custom component but still need to access the combobox child like textinput and listen for their event.
View 2 RepliesI have made a combobox and I am trying to make it so that when I press a button, the song that is selected plays. I have this code already but it doesn't work.
ActionScript Code:
song1 = new Sound();
song1.attachSound("pdandcos");
song2 = new Sound();
song2.attachSound("pieman");
song = song1;
play_btn.onRelease = function() {
song = songlist_cb.value;
song.start();
};
i inserted a dateField component.on clicking it displays calender, i would like to add 2 comboboxes, i shows hours(0 to 23) other for minutes (0 to 59) to calender so tht the user can select the time along with the date and that wil be displayed in the text input as date and Time. one more thing i would like to add is clear button to clear the selected date to the calender.
View 1 RepliesI'm using narrator clips (imported mp3 files) that I place every so often, set to Stream (as opposed to Event). This works fine, as usual.That is, UNTIL I use a "Next" or "Back" button I've implemented to go to the next section of the program. I'm using a simple gotoAndPlay("Slide"+myCurrentSlide); where "Slide" is the first part of the frame label, and myCurrentSlide is a number that increments as the movie progresses.
When the user clicks the Next button, the flash movie successfully moves ahead to the proper frame on the timeline, but the audio is out of synch, (comes in half way through a sentence, even though the frame label is placed in between mp3 files on the timeline.
Flex 4 Combobox is extended with a Text Input that helps in getting to the item that is searched for.I have created a Check Box as an itemrenderer for this Flex 4 Combobox. I would like to Add a Select All and Select None options in the drop down of the Combobox. I know that i could accomplish by editing the dropdownfactory in case of a Flex 3 Combobox. But in Flex 4 the dropdownfactory doesnt exist.
View 2 RepliesI can use this to trace the new combobox value every time the user changes it:
Actionscript Code:
// Create listener object.var cbListener:Object = new Object();// Create event handler function.cbListener.change = function (evt_obj:Object) { trace("Currently selected item is: " + evt_obj.target.selectedItem.label);}// Add event listener.my_cb.addEventListener("change", cbListener);
But that doesn't do anything when I select the same value. This is what I want it to do: when using the combobox some textfields should fill itself with some default values belonging to that label. Then the user can change those values if desired. When the user then chooses another combobox label the fields get filled with the default values of that label again. But when the user chooses the label previously set, the textfields don't get refilled, cause the listener object only reacts when the label value has been changed, not when the label value is the same as previously chosen. Is there a way to make it react upon chosing any label? Not just others, but every label?
I have a booking form with some combobox's that's placed within a MC. My issue is that the combobox data isn't showing. When you click the drop down you can see the data, but when it's closed it doesn't show.
Here are the fla & swf files so you can see what I'm talking about...
[URL]
I have a main SWF that loads an external SWF with addChild. the external SWF loads fine but when i click the combobox in the external SWF I get 2 errors:
ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
at flash.display::DisplayObjectContainer/removeChild()
at fl.controls::ComboBox/close()
[code].....
I have made a placed a combobox called 'genreselect' on the stage and I am trying to output genreselect.value to a dynamic textbox called 'output' but I get the following error:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at fl.controls::ComboBox/get value()
at cataloguemenu_fla::MainTimeline/cataloguemenu_fla::frame1()
[code].....
How do I get the data from a combobox?
View 11 Repliesis it possible to put an MC in a row of a ComboBox? How should I go about doing this? I was going to copy the .as file(s) for the comboBox/cellRenderer components and alter them, but after looking at a few, I'm not sure which ones would be best to work with.
View 3 Repliesim trying to have the loader load a new url specified in dataprovider. i get "could not convert" error or "element is malformed".
Actionscript Code:
function onLoaded_2(e:Event):void{xml_2 = new XML(e.target.data); xml_2.ignoreWhite = true; var il:XMLList=xml_2.channel.item; for(var i:uint=0;i<il.length();i++){ ///display feed var currentFeed:URLRequest = new
[code]....