Professional :: Sound Will Not Synch Correctly On QuickTime Export
Apr 12, 2011
I have a 5 minute flash movie that has great sound synchronization with the motion when I export as a SWF. However, when I export as a Quicktime file (.mov), sometimes the sound is ahead of the image. Is there a setting I can tweak during Export to remedy this? (so far I have tried to save the Video as "H.264" as well as "Animation". And for sound I have had no luck with the setting of "None" or "Apple Lossless."
I am working on a cartoon and the sound synchs up fine from regular frame to frame. But it won't synch when I want the sound to synch up with the end of a motion tween.URL...
I'm working in Flash CS3. My animation is about a minute long, with a single audio track that plays from beginning to end. The sound quality is noticably better when I set the synching to Event, but unless I set it to Stream the sound falls behind the animation. Is there any way to maintain proper synchronization with the Event setting? Also: will the lag be consistent on different machines and players? I thought about adjusting the timing of the animation so that it matches the Event-set sound in playback, but that's such a clunky a solution it seems likely to cause other problems.
I'm trying to export a Flash movie to Quicktime. The movie is not very large - the SWF file is about 1700 KB. When the export program runs it shows a progress bar recording Flash content. The green bar goes to the end and then gets hung up and never finishes (at least after a half hour wait). I have installed the latest Quicktime codec with Quicktime 7 player.
I am using Final Cut Pro 3 and would like to export FLV movies either directly FCP timeline or from Quicktime export. I have used systems with Adobe CS3 installed and they have a quicktime plug-in for encoding. However, I've just purchased Adobe CS5.5 Production Premium and I have not gained that functionality.
how to get export from FCP with what I have? Do I have use CS3 or CS4? Or do I have to export a quicktime movie from FCP then use Adobe Media Encoder to create FLV files?
i can't export as Quicktime, it just stops at "Recording Flash Content" - Yes i could export as .avi, but for some reason, i lose some effects there, i could export as .swf as well, but Sony Vegas won't read .swf files, and i can't find a FREE (I don't want some trial with annoying Logos) ...
I have been getting a lot of visual artifacting when exporting a Flash CS4 movie to Quicktime. No matter what compressor I use, animation, dv/dvcpro, or even none, artifacts appear and I cannot figure out how to export a clean QT movie no matter what setting I use. I have even changed the finshed when last frame reached to finish at certain time.
I am using Flash CS3 on a PC. I am trying to export an animation to quicktime (Export > Export movie) and have some problem regarding the sound. The animation contains actionscript 2.0loads external swf contains streaming soundsplay other sounds via actionscript. 4 scenes. When publishing the animation, it works fine, but when exporting it to .mov, the audio goes faster than the video.
Export setting: Video:Compression type: H.264Frame Rate: CurrentKeyFrames: 4 Sound:Compressor: 24-bit integerRate: 48.000KhzSize: 16BitUse: Stereo To be honest, I tried many other compression types and frame rates and keyframes, but nothing seem to work.
I tried: - importing the external swfs into the original animation - creating a streaming silence from frame 1 for continuous sound - capturing the animation using CamStudio, but it's not smooth enough
I'm trying to export a Flash movie as a .mov file. The animation is not that big but there are strange display issues. As the character moves across the screen, there are bits and pieces left on the screen from the previous movements. It's just not rendering correctly and looks terrible. I can't seem to fix it and have been playing with the Format settings etc. There's always the junk left on the screen.
I am having this issue with Flash CS5 Mac version:After making an animation, I export movie as Quicktime. When I view this movie, the animation leaves trails of color when an object moves across the screen, leaving behind little bits of color too. This does not happen when I export a SWF, but it does happen when I export a Quicktime movie. I export using Quicktime, so I can then I can export it into a flv in Adone media encorder.Why does this happen?
Just installed Flash 8 on my mac book pro (os 10 .4.9) but the option to export to .flv from quicktime pro is not coming up in the menu. Does anybody know why this is not appearing. The component is installed but not showing up in quicktimes pull down menu.
Every time I try to export from flash as a quicktime, in my exported file pieces of animation keep getting left behind as residue of some sort, and it's messing up the video. I've included a link to a youtube video of what I'm looking at, the video doesn't run real smoothly in youtube but I think it should be clear what the problem is.
When I try to export a Quicktime movie from the Export>Export Movie, I get this error message:Error creating Flash movie file.Be sure the destination file is not locked or on a locked drive. Also, check that the file name is not too long.A few things I've tested:
- Saving to different drives - all of which are not locked.
- changing the file name to one single word followed by .mov
- saving the flash file as a new file and trying again
- opening the file on a different machine and exporting
None of these have fixed the problem. Every time I get the same error. I've been able to export swf movies and also JPEG sequences, but I'd much rather be able to export the Quicktime movie since I need to bring this into FCP and the Flash movie has sound in it as well, so with the JPEG sequence I'd have to lay in the audio again.
I have imported my wav files to my library added them to the down state of my buttons and when I test the file I get (Sound has no valid device sound path although exporting device sounds was requested in the export settings. This sound will be ignored.) I have been surching for an answer but as of yet have found none.
I am having this issue with Flash CS5:After making an animation, I export movie as Quicktime. When I view this movie it?well I am not sure what it is doing. The animation leaves trails of color when an object moves across the screen, leaving behind little bits of color too. Is it lagging? This does not happen when I export a SWF, but it does happen when I export a Quicktime movie.I export using Quicktime, so I can then import it into iMovie, to add titles, and sound and others things, or perhaps I just want to add a little Flash movie to my iMovie project.
I have a sound file in my library that plays perfectly in the library - a song with jingle bell accompaniment.When the animation is saved as a swf file, the song is there, but the jingle bell accompaniment isn't.When I extract the audio track from the flash file with AVS software,the jingle bell accompaniment is missing.
Background:I do not have the original recording that I imported to my Flash project.Even when I did have it, the jingle bell percussion was missing. I don't knowt how to get the sound file out of the library to save it individually (in case re-importing it would solve the problem)I don't know how to make the sound file play when I'm working on the file. (If I did, maybe I could adjust it in the timeline?)
I am trying to export a flash animation as a mov, so i can convert it for html5. When I export the movie, the animation has artifacts in it, strange things do not erase correctly, they do not show when i view it in Flash, or when I view the exported flv file.
So as you can see, there is a 1/2 drawn image. They round things are floating down, but for some reason, as they float down to stack, they leave behind some partial images.
I have an MP3 file in Flash 5.5 that I have edited in the properties panel of the frame where the sound is...I basically cut a couple seconds off the beginning by editing the timeline. It plays fine when I'm in Flash, but when I publish the movie, the sound is published unedited.
My movie is five about minutes long with audio and an offscreen timeline move clip containing action script to control other movie clips or play the root directory. After about a minute or so, movie clips get out-of-synch with the audio, apparently its getting bogged down. My swf file doesn't seem that big, about 2.2MB and my move clips aren't that complex, although up to three levels deep.
I would be very grateful if anyone can shine any light on the problem I am having with Flash CS 5 for OS X 10.5 and 10.6. A local admin account allows a user to export a flash project file as a quicktime file no problem. However, when a network user tries to do exactly the same thing, i receive a "unknown error" message.
We are running our iMacs via active directory and open directory. I have added Flash to the allowed applications list in Workgroup manager and have allowed access to library paths etc. So basically a flash file wont export as a quicktime file under OS x when logged on as a network user.
We have tried different export areas (desktop, removable drive, network home folder) but no joy. The permissions must be blocked elsewhere.
I've attached 2 screenshots. The first shows the flash stage at its default size - as you can see my font is all distorted and weird looking but when you zoom in (image 2) it's exactly like it should be. What would make it look like this when the stage hasn't been zoomed out or anything, it's just from pressing cmd and enter from flash?
I need to convert/publish a flash movie to old format of quicktime (.mov) with Flash CS4. I need .mov file with embedded vectorial flash and transparency support.It is possible?
This is really frustrating and baffling.I have a flash project which consists of a .mov import with graphics mottions over the top.First there was no sound when exporting the project as a swfI then tried to export the project as a Quicktime .mov but got an error message "could not complete operation because of an unknown error"What am I doing wrong?
I created a swf file useing Flash and need to convert this to a mov file. I watched a training video and under Publish Settings > Format their should be a Quicktime mov option. I do not have this option on my CS5 Flash version. Also, if I try to export as a mov file, nothing happens. I have QuickTime Player version 7 on my computer. It just will not show up as an option in Flash. How do I convert a swf file to a mov file without going online and purchasing a converter?
I am having trouble exporting Quicktime videos from Flash CS4. Previously, in Flash CS3, I got the following dialogue box: Flash CS3 export box Notice the fact that I can change the export resolution in this box. I set the resolution to what I want, and then click the quicktime settings box to change the movie's imensions to what I want. The resolution settings in this picture determine what dimensions the flash movie is rendered at, not the final quicktime movie. Now, take a look at my new dialogue box:
Flash CS4 export dialogue options Notice that I can't change the resolution settings here. If I go into the quicktime settings and export out a movie at a higher resolution, it first renders the flash file at the ative resolution in the picture and then upsizes it to the quicktime resolution, resulting in a very low-quality, blurry movie.
So I have recently aquired Flash CS4 and the Quicktime Export is completely different from any version before.I create a lot of 3-4 minute shorts in Flash and have always enjoyed the ease of QT export, but when I export with CS4 I get all kinds of ghosting, even on 5-10 second clips so breaking up the fla file's scenes is no help.After doing a lot of online research I see a few people have similar problems, but no concrete explanations or solutions.Has Flash-to-Quicktime compatability been disabled?I see that the "Quicktime Movie" export options is not available, only the "Quicktime" export, which yields inferior results. Since I export to the web and for dvd I don't want to have to export PNG sequences and rebuild the soundtrack, but is there simply no longer quality compatability between the two programs?Do I need to ditch Flash for Toon Boom?
I have Flash MX and Quicktime 7. All I want to do is publish my movie as quicktime. But when I do I get the error message, "The installed version of QuickTime does not have a handler for this type of Macromedia Flash movie". So... after a little digging I found out its a issue with flash 6, and changed the flash version to 5! But It still wont work! What on earth am i doing wrong?
I'm using a version of the pause sound code found on the adobe/page, but it's not resuming the sound from the pausePoint. I have the pause/play function tied to the stage so that my external swfs pause as well. Here's a clip of my code,This is the load audio with swf part:
var fl_Loader_5:Loader;var fl_ToLoad_5:Boolean = true;var channel:SoundChannel = new SoundChannel();var snd:Sound = new Sound();var req_1:URLRequest = new URLRequest("audio/Introduction.mp3");
