Flash :: Professional - Export QuickTime - Junk Displayed In .mov
Jun 2, 2011
I'm trying to export a Flash movie as a .mov file. The animation is not that big but there are strange display issues. As the character moves across the screen, there are bits and pieces left on the screen from the previous movements. It's just not rendering correctly and looks terrible. I can't seem to fix it and have been playing with the Format settings etc. There's always the junk left on the screen.
View 2 Replies
Similar Posts:
Jun 26, 2009
i can't export as Quicktime, it just stops at "Recording Flash Content" - Yes i could export as .avi, but for some reason, i lose some effects there, i could export as .swf as well, but Sony Vegas won't read .swf files, and i can't find a FREE (I don't want some trial with annoying Logos) ...
View 17 Replies
Jun 9, 2011
I am having this issue with Flash CS5 Mac version:After making an animation, I export movie as Quicktime. When I view this movie, the animation leaves trails of color when an object moves across the screen, leaving behind little bits of color too. This does not happen when I export a SWF, but it does happen when I export a Quicktime movie. I export using Quicktime, so I can then I can export it into a flv in Adone media encorder.Why does this happen?
View 1 Replies
Aug 19, 2010
I'm trying to export a Flash movie to Quicktime. The movie is not very large - the SWF file is about 1700 KB. When the export program runs it shows a progress bar recording Flash content. The green bar goes to the end and then gets hung up and never finishes (at least after a half hour wait). I have installed the latest Quicktime codec with Quicktime 7 player.
View 1 Replies
Nov 9, 2011
I am using Final Cut Pro 3 and would like to export FLV movies either directly FCP timeline or from Quicktime export. I have used systems with Adobe CS3 installed and they have a quicktime plug-in for encoding. However, I've just purchased Adobe CS5.5 Production Premium and I have not gained that functionality.
how to get export from FCP with what I have? Do I have use CS3 or CS4? Or do I have to export a quicktime movie from FCP then use Adobe Media Encoder to create FLV files?
View 2 Replies
Jun 29, 2009
I have been getting a lot of visual artifacting when exporting a Flash CS4 movie to Quicktime. No matter what compressor I use, animation, dv/dvcpro, or even none, artifacts appear and I cannot figure out how to export a clean QT movie no matter what setting I use. I have even changed the finshed when last frame reached to finish at certain time.
View 21 Replies
Jun 18, 2010
I am using Flash CS3 on a PC. I am trying to export an animation to quicktime (Export > Export movie) and have some problem regarding the sound. The animation contains actionscript 2.0loads external swf contains streaming soundsplay other sounds via actionscript. 4 scenes. When publishing the animation, it works fine, but when exporting it to .mov, the audio goes faster than the video.
Export setting:
Video:Compression type: H.264Frame Rate: CurrentKeyFrames: 4
Sound:Compressor: 24-bit integerRate: 48.000KhzSize: 16BitUse: Stereo
To be honest, I tried many other compression types and frame rates and keyframes, but nothing seem to work.
I tried:
- importing the external swfs into the original animation
- creating a streaming silence from frame 1 for continuous sound
- capturing the animation using CamStudio, but it's not smooth enough
View 1 Replies
Apr 12, 2011
I have a 5 minute flash movie that has great sound synchronization with the motion when I export as a SWF. However, when I export as a Quicktime file (.mov), sometimes the sound is ahead of the image. Is there a setting I can tweak during Export to remedy this? (so far I have tried to save the Video as "H.264" as well as "Animation". And for sound I have had no luck with the setting of "None" or "Apple Lossless."
View 2 Replies
Sep 25, 2009
Every time I try to export from flash as a quicktime, in my exported file pieces of animation keep getting left behind as residue of some sort, and it's messing up the video. I've included a link to a youtube video of what I'm looking at, the video doesn't run real smoothly in youtube but I think it should be clear what the problem is.
View 1 Replies
Feb 11, 2011
I am having this issue with Flash CS5:After making an animation, I export movie as Quicktime. When I view this movie it?well I am not sure what it is doing. The animation leaves trails of color when an object moves across the screen, leaving behind little bits of color too. Is it lagging? This does not happen when I export a SWF, but it does happen when I export a Quicktime movie.I export using Quicktime, so I can then import it into iMovie, to add titles, and sound and others things, or perhaps I just want to add a little Flash movie to my iMovie project.
View 0 Replies
Mar 14, 2012
I am trying to export a flash animation as a mov, so i can convert it for html5. When I export the movie, the animation has artifacts in it, strange things do not erase correctly, they do not show when i view it in Flash, or when I view the exported flv file.
So as you can see, there is a 1/2 drawn image. They round things are floating down, but for some reason, as they float down to stack, they leave behind some partial images.
View 2 Replies
Apr 12, 2007
Just installed Flash 8 on my mac book pro (os 10 .4.9) but the option to export to .flv from quicktime pro is not coming up in the menu. Does anybody know why this is not appearing. The component is installed but not showing up in quicktimes pull down menu.
View 3 Replies
Oct 9, 2008
When I try to export a Quicktime movie from the Export>Export Movie, I get this error message:Error creating Flash movie file.Be sure the destination file is not locked or on a locked drive. Also, check that the file name is not too long.A few things I've tested:
- Saving to different drives - all of which are not locked.
- changing the file name to one single word followed by .mov
- saving the flash file as a new file and trying again
- opening the file on a different machine and exporting
None of these have fixed the problem. Every time I get the same error. I've been able to export swf movies and also JPEG sequences, but I'd much rather be able to export the Quicktime movie since I need to bring this into FCP and the Flash movie has sound in it as well, so with the JPEG sequence I'd have to lay in the audio again.
View 2 Replies
May 31, 2007
I tried to export movie entirely created with Actionscripts to Quicktime, but no luck. Is this possible to do? How?
View 2 Replies
Mar 3, 2011
I would be very grateful if anyone can shine any light on the problem I am having with Flash CS 5 for OS X 10.5 and 10.6. A local admin account allows a user to export a flash project file as a quicktime file no problem. However, when a network user tries to do exactly the same thing, i receive a "unknown error" message.
We are running our iMacs via active directory and open directory. I have added Flash to the allowed applications list in Workgroup manager and have allowed access to library paths etc. So basically a flash file wont export as a quicktime file under OS x when logged on as a network user.
We have tried different export areas (desktop, removable drive, network home folder) but no joy. The permissions must be blocked elsewhere.
View 2 Replies
Nov 20, 2008
I am having trouble exporting Quicktime videos from Flash CS4. Previously, in Flash CS3, I got the following dialogue box: Flash CS3 export box Notice the fact that I can change the export resolution in this box. I set the resolution to what I want, and then click the quicktime settings box to change the movie's imensions to what I want. The resolution settings in this picture determine what dimensions the flash movie is rendered at, not the final quicktime movie. Now, take a look at my new dialogue box:
Flash CS4 export dialogue options Notice that I can't change the resolution settings here. If I go into the quicktime settings and export out a movie at a higher resolution, it first renders the flash file at the ative resolution in the picture and then upsizes it to the quicktime resolution, resulting in a very low-quality, blurry movie.
View 4 Replies
Jul 3, 2009
So I have recently aquired Flash CS4 and the Quicktime Export is completely different from any version before.I create a lot of 3-4 minute shorts in Flash and have always enjoyed the ease of QT export, but when I export with CS4 I get all kinds of ghosting, even on 5-10 second clips so breaking up the fla file's scenes is no help.After doing a lot of online research I see a few people have similar problems, but no concrete explanations or solutions.Has Flash-to-Quicktime compatability been disabled?I see that the "Quicktime Movie" export options is not available, only the "Quicktime" export, which yields inferior results. Since I export to the web and for dvd I don't want to have to export PNG sequences and rebuild the soundtrack, but is there simply no longer quality compatability between the two programs?Do I need to ditch Flash for Toon Boom?
View 8 Replies
Aug 10, 2010
I have Flash MX and Quicktime 7. All I want to do is publish my movie as quicktime. But when I do I get the error message, "The installed version of QuickTime does not have a handler for this type of Macromedia Flash movie". So... after a little digging I found out its a issue with flash 6, and changed the flash version to 5! But It still wont work! What on earth am i doing wrong?
View 9 Replies
Jan 23, 2011
I have a 2.93 Core 2 with 8 Gb of RAM.I have a Flash video containing animations, graphics and text. It is 2 minutes long. The SWF works fine. ActionScript 3.0. 900x500 resolution.When I first attempted to export as quicktime, it gave a message very close to this:
"Warning: Runtime Shared Libaries (RSL's) failed to be associated with the file due to Quicktime Publishing Settings."
The wording may be a bit off, this is from memory. Keep in mind I am not even trying to publish at this point, I am exporting. Not that I could tell you the difference.So after showing this message, the progress bar continues to fill until it is completely full, and then nothing happens. The bar jus sits there full, doing nothing.So then after I explored the publishing settings, I found under the 'Flash' tab, a dropdown menu that let me choose "Merge into code" as the integrating the Runtime Shared Library with the file.Then I hit publish. The progress bar fills and disappears, I press okay. Still, I can not find any movie file (or even the place to choose where published file go) on my computer.
After this, I try exporting. The warning the appeared previously is gone, but the progress bar still freezes when it is full, and no file is produced.One thing I have been thinking is maybe it has to do with the number of frames in my file. I have inserted the stop action at the end, so the video stops and does not loop when previewing the SWF, however there are still many blank frames, that don't contain any objects or tweens or anything like that. The setting is currently "stop encoding at last frame" which I assume means the last frame of my video before the stop function. I cannot figure out a way to make the empty frames after this point dissappear, I just figure it is part of the program itself.
View 12 Replies
Nov 8, 2011
Is it possible to import a QuickTime movie with alpha channel into an FLA and have the FLA recognize the Alpha channel? When I've done this, it just shows opaque black instead of an alpha channel. I need that black to be transparent so I can see the layers below the video layer.
View 6 Replies
Dec 2, 2011
Can I convert a Flash file to Quicktime or Windows Media Player? If so....how? (Also, is swf the only file format on Flash?) I've been reading I need to download some converter to do this.
View 5 Replies
Aug 24, 2010
I'm using CS4 to export a basic flash movie with embed tags pre scripted. And the issue is that on some OS systems using Vista or Windows 7 and IE 8 as a primary browser, it appears that IE 8 is not displaying the flash banner completely.... its CROPPING it off... This is very strange because the banner works fine in FireFox, IE7,Opera,Chrome but not I.E.8 on some OS systems...
If you google "Flash not displaying correctly in IE 8" you'll get alot of people with the same issues but no real definate fix...
what i could try? Do i need different flash embed tags? Or is this a user issue?
View 7 Replies
Mar 11, 2010
I currently pull an html file into our site via iframe. (due to various factors, I cannot host the information in the html on our site and need to host it elsewhere). Is it possible to use a loader or other method to pull this information into flash?
View 2 Replies
Nov 14, 2011
Lets say a scene started off around 70-80mb, it loaded a swf in, and by removing the event listener and setting objects to null and numbers to 0 before unloading the swf,and went back to the original scene, the memory stack up till like 80mb++, and every time I repeats the same process the memory goes up higher,is that normal? or its a memory leaking issue?
View 4 Replies
Sep 3, 2009
I need to convert/publish a flash movie to old format of quicktime (.mov) with Flash CS4. I need .mov file with embedded vectorial flash and transparency support.It is possible?
View 3 Replies
Oct 20, 2011
This is really frustrating and baffling.I have a flash project which consists of a .mov import with graphics mottions over the top.First there was no sound when exporting the project as a swfI then tried to export the project as a Quicktime .mov but got an error message "could not complete operation because of an unknown error"What am I doing wrong?
View 5 Replies
Dec 8, 2011
I created a swf file useing Flash and need to convert this to a mov file. I watched a training video and under Publish Settings > Format their should be a Quicktime mov option. I do not have this option on my CS5 Flash version. Also, if I try to export as a mov file, nothing happens. I have QuickTime Player version 7 on my computer. It just will not show up as an option in Flash. How do I convert a swf file to a mov file without going online and purchasing a converter?
View 4 Replies
Sep 3, 2010
I created a short animation using a series of photos stop-motion style, only about 18 frames long (as part of a larger project) Whenever i try to export it into SWF (Either CTRL+ENTER or the FILE>EXPORT method) the time it takes is super-fast, but no file is created. When the export was done with a previous successful export, it simply dissapeared
View 4 Replies
May 17, 2011
The audio is fine in the flash file but it is bad in the quicktime or swf file I exported.
View 4 Replies
Sep 22, 2010
I am unable to export any swiff files from CS5 Flash Pro that contain TLF text. If I apply one text box with TLF text on the stage, with no script on the timeline and nothing in the library, I receive the following compiler error:
MainTimeline, Line 39 1137: Incorrect number of arguments. Expected no more than 1.
MainTimeline, Line 42 1137: Incorrect number of arguments. Expected no more than 7.
I do a lot of heavy actionscript coding, and rarely have anything on the timeline or stage in Flash, but this is a pretty big error for a new feature like the TLF engine. I think there is an issue with files missing, or flash not having the correct path to the classes used by the TLF text, but that is only a guess.
All I can get out of the Adobe documentation is that there is a SWC file that is supposed to be remotely accessed, downloaded, or embedded into the SWF on export.
I have been completely unable to use this feature of Flash since I purchased CS5. Additionally, when I tried to contact Adobe directly by phone, they referred me to these forums.
View 1 Replies
