Professional :: Export To .swf Changes Sound File?
Dec 4, 2011
I have a sound file in my library that plays perfectly in the library - a song with jingle bell accompaniment.When the animation is saved as a swf file, the song is there, but the jingle bell accompaniment isn't.When I extract the audio track from the flash file with AVS software,the jingle bell accompaniment is missing.
Background:I do not have the original recording that I imported to my Flash project.Even when I did have it, the jingle bell percussion was missing. I don't knowt how to get the sound file out of the library to save it individually (in case re-importing it would solve the problem)I don't know how to make the sound file play when I'm working on the file. (If I did, maybe I could adjust it in the timeline?)
View 1 Replies
Similar Posts:
Jun 30, 2011
I have imported my wav files to my library added them to the down state of my buttons and when I test the file I get (Sound has no valid device sound path although exporting device sounds was requested in the export settings. This sound will be ignored.) I have been surching for an answer but as of yet have found none.
View 3 Replies
Apr 12, 2011
I have a 5 minute flash movie that has great sound synchronization with the motion when I export as a SWF. However, when I export as a Quicktime file (.mov), sometimes the sound is ahead of the image. Is there a setting I can tweak during Export to remedy this? (so far I have tried to save the Video as "H.264" as well as "Animation". And for sound I have had no luck with the setting of "None" or "Apple Lossless."
View 2 Replies
Jun 1, 2011
I have an MP3 file in Flash 5.5 that I have edited in the properties panel of the frame where the sound is...I basically cut a couple seconds off the beginning by editing the timeline. It plays fine when I'm in Flash, but when I publish the movie, the sound is published unedited.
View 3 Replies
Feb 15, 2010
I'm trying to export a .mov from a .fla file. Strange thing is happening. When I export the .mov, there are small sections of the vector animation that are missing or not showing up like missing puzzle pieces. I can't find anything about this. I've tried many different settings and they yield similar results.
View 5 Replies
Jul 3, 2010
I made an animated logo using several objects and some text. The .SWF file runs quite nice. But when I export it to .png file, I can see all objects correctly except the text. Why it happened? Where my text has gone?
View 3 Replies
Oct 6, 2008
want to know if it is possible to create a vector basedfile (PDF) from a web based Flash application. The applicationwould be a 'Design it yourself' type deal, it would just be a fancytext generator. All this will be designed by the user using theflash application . What I want to know is once the user has finished designingtheir text, can this 'creation' then be exported as preferably aPDF, or Jpg, etc. once the user submits the design?
View 6 Replies
Jul 27, 2010
what are the best settings to export .mov file? I have 1280x720 movie and I can export it no problem but sometimes it skips or gets stuck when I play it. I'm not sure if it's my video card or the actual file. I was using the H.264 setting and compressor quality best.
View 1 Replies
Jul 14, 2011
I have a flash file which is 690 x 420 pixels. When I export it and set it up to play on jwplayer it shows with all of the pieces that are off the art board also. This is a test [URL].
View 7 Replies
Mar 26, 2010
I have a presentation that I'm trying to create and export to a projector file. My problem is that I have gone beyond the allowed 16000 frames so the presentation stops in the middle and loops back to the beginning.
View 15 Replies
Aug 28, 2010
I have a sound file that is attached to the Over state of a button.I open the Edit Envelope dialog box and change the In and Out points of the sound.On the Stage, with Enable Simple Buttons active, the sound works as planned, triggered on the Over state and playing the part that is indicated by the edited in and out points on the envelopeWhen I use the Test Movie command (or publish the file), the edited sound cuts off abruptly in the middle of the sound.
View 3 Replies
Apr 15, 2006
whenever i try to put video into a flash movie it works perfectly, but when i export the movie into AVI it loses the original video's sound.
View 3 Replies
Jan 30, 2010
I am having a bit of a problem with the playback of a certain sound in my published file. I have a sound attached to a frame in my timeline and I have it as a stream so that it plays extactly where I want it to in the movie. When I publish my movie, however, the sound plays about 2-3 seconds before it's supposed to. I tried putting another sound file in its place and the other file plays early as well. The sound will also start early if it is an event
View 3 Replies
Feb 2, 2012
It seems like we have hit a limit in how many assets (movieclips/sounds etc) that we can have in our library. We can export at the moment, but if we put in another cutscene or sound flash wont export. It shows the progress bar but when its done the .swf dosent show up and cannot be found in the project folder. Does anyone have a clue on whats going on? We've been working on this game for the past 5 months (full time) and we'd be devastated if all our time and effort has been in vain.
View 1 Replies
Sep 18, 2006
I am trying to export a .swf file which plays video/sound so I can upload the file to a website (embedded). However, the sound does not want to play when in flash. It is basically of a person talking and lasts about 20 seconds. I have exported the file as a .mov using flash mx pro on mac. the .mov file plays in a quicktime but when imported into flash the sounds seems to disappear.
View 1 Replies
Mar 13, 2011
I have a flash file with about 20 different scenes in it. And in one of the scenes there is an audio file that is 15 seconds long. The sound is on a menu page so i only want it in that scene. But if you are on that page for less than 15 seconds and go to another page then it carries on the sound into the next scene and if you go to and from the menu page to another scenes in quick succession you get a build up of sound which is horrible.
View 1 Replies
May 17, 2011
The audio is fine in the flash file but it is bad in the quicktime or swf file I exported.
View 4 Replies
Mar 16, 2009
I have to play a sound file and show the progress of the sound file being played. I am using import flash.media.Sound; import flash.media.SoundChannel; But the PROGRESS event gives theprogress of loading of file. I want to know of much of the song has been played and how much more is left.
View 3 Replies
Feb 13, 2012
I can use flash ok to build stuff, but I usually just build a flash presentation with movieclips and buttons all contained in the one file. I have never had to put my creations onto cd-rom before. So now I am looking at a CD-rom and seeing how someone else has done it and I see that all the .swf files are separated, as will as sound and video. I thought the only reason to do this would be to be able to access and change for example and mp3. without having to open the flash file, but I am thinking there are other reasons?
View 3 Replies
Jun 12, 2010
I am trying to create a soundboard and I have all my buttons and stuff, the only thing left is to put the sound files in. However, I have tried adding them to the library and dragging and dropping them over the HIT option like I usually do, but when I export the swf file, the sound file sounds terrible, it crackles and sometimes stutters a bit. I have tried setting these sound files to mp3 and raw in adobe options but with no luck. I am using actionscript 2.0 if that has anything to do with it. Also, I need these files embedded, not just linked.
View 2 Replies
Oct 14, 2009
I asked this earlier but maybe I didn't give enough information. I am working on a website where video quality is very important and the client is delivering me the video already compressed. I then want to import it to flash CS3 and export it as .flv for progressive download with the media playback component. I have done all of this successfully in a sense that it all works but the video quality is not good enough, it's good but the client says it;s a bit grainy. I used the highest setting in Flash, on2 vp6 at 700kbs.
My question is what is the best file format (.mov etc) and what settings should the client use, so I can create the highest quality .flv export from their .mov file? Second question, I used an 8 second buffer but now the client is saying they don't want it to buffer at all. What are the other options besides progressive download, I have never delved into this before?
View 5 Replies
Nov 17, 2011
I am very new to ActionScript. I have a .fla file which contains the AS2 code for the frames. What I need to do is that I have to export this code as a separate file. There may be a separate file(or class file) for each frame code. Is it possible to me do it automatically without losing animation interactivity and functionality? Or is there any other way?
View 1 Replies
Mar 22, 2006
Is it possible to export text from a text field, which has been created in Flash and export it into an external file such as a text file or Word document?The idea is that information will be collected by the user into a text field within the swf. Hopefully, this information can then be exported into an external file which will allow the user to work on and edit at a later stage. It needs to be a separate editable document. Is this possible? I'm using Flash 8.
View 1 Replies
Dec 1, 2010
I have created a SWF file that plays/stops sound. The SWF file works great when previewed in Flash CS4, but does not work when inserted in the HTML file.Here are the 2 files that are automatically generated when I INSERT>MEDIA>SWF in Dreamweaver CS4:
swfobject_modified.js
expressInstall.swf
Here is the ActionScript3 that I am using in the Flash file:
[code].......
View 6 Replies
Apr 17, 2008
am trying to export/publish a swf of a dress up game I made so I can put it in Dreamweaver and upload it to my site but I keep getting this error message:"Error Creating Flash Movie File: Be sure the destination file is not locked or on a locked drive. Also, check that the file name is not too long".I am also unable to test the movie, it gives me the same error message.
View 3 Replies
Nov 11, 2009
I'm having some trouble getting the following code to work - trying to use the new Sound.extract() function to get two seconds of a Sound into a ByteArray, and then create a new bytearray with a WAV header, and then output the file. The resulting 'test.wav' file sounds very wrong although slightly recognisable? I think I may have some of the WAV header settings may be wrong but I'm not quite sure what's the matter and after a long time scratching
[Code]...
View 5 Replies
Nov 21, 2010
I have a long mp3 file hosted on a standard apache server (30 minutes long so far, but I would like it to work with longer sounds too).I'd like to start playback of this audio within at a specified point. When attempting to use Flash Actionscript 3, my basic tests show that ALL the audio from the start to the position I choose is buffered before playback (Sound.bytesLoaded was my friend here). If I start one second in, it takes about 3 seconds to start playback, 30 seconds in, takes about 25 secondsObviously with a really long mp3, like skipping playback to the middle of a 3-hour audiobook, this isn't going to be practical.Here's the ActionScript 3.0 code I'm using:
button.addEventListener(MouseEvent.MOUSE_DOWN, function():void {
var s:Sound = new Sound();
var req:URLRequest = new URLRequest("http://example.com/audio.mp3");
[code].....
View 1 Replies
May 21, 2010
I have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. (not sure if I'm able to give a link to it or not on here. If I able to and someone would like to see it let me know)I want to know if my flash header can support the following addionalunctionality/changes:1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features.
View 2 Replies
Oct 14, 2009
It's possible to play a sound file through AS, either by loading it from a folder or import it to flash. It's also possible to play a dynamic tone with flash.media.Sound + writeFloat.
But... is it possible to play a sound file with flash.media.Sound + writeFloat in some way? I want to play a sound file without having to deal with any files except the .swf!
View 9 Replies
Jan 3, 2010
I started exporting the swf with no problem, but the next day i done a lot of editing and adding content, so when i try to exported didn't work, my swf file disappear from my folder and every time i try to exported the swf when it pass about the 75% of loading disappear. There is any software that can expor fla to swf ?? why flash is not exporting the swf correctly?.
View 3 Replies
