Professional :: How To Make Sound File Play In Only One Scene
Mar 13, 2011
I have a flash file with about 20 different scenes in it. And in one of the scenes there is an audio file that is 15 seconds long. The sound is on a menu page so i only want it in that scene. But if you are on that page for less than 15 seconds and go to another page then it carries on the sound into the next scene and if you go to and from the menu page to another scenes in quick succession you get a build up of sound which is horrible.
I'm having trouble getting any sound to play in my second scene. I'm using actionscript in the first scene to fade in the music, then fade it out after they click the button.
Here's the code on layer 1[code]...
Problem: I tried adding a sound to the stage in scene 2 but nothing plays when i test the movie, expect for the music in scene 1. I tried creating another sound object in the first frame of scene 2 but i get the same result.
I have to play a sound file and show the progress of the sound file being played. I am using import flash.media.Sound; import flash.media.SoundChannel; But the PROGRESS event gives theprogress of loading of file. I want to know of much of the song has been played and how much more is left.
I have created a SWF file that plays/stops sound. The SWF file works great when previewed in Flash CS4, but does not work when inserted in the HTML file.Here are the 2 files that are automatically generated when I INSERT>MEDIA>SWF in Dreamweaver CS4:
swfobject_modified.js expressInstall.swf Here is the ActionScript3 that I am using in the Flash file:
i have succesfully managed to encode / create an .FLV file which now plays back in my .swf file. The picture and sound are great when streaming off the web!
how do i command the file to play back in a continous loop? at present it plays and then rewinds back to the begining.
i have investigated some of the .FLV parameters but can't seem to find the control / command i'm looking for.
It's possible to play a sound file through AS, either by loading it from a folder or import it to flash. It's also possible to play a dynamic tone with flash.media.Sound + writeFloat.
But... is it possible to play a sound file with flash.media.Sound + writeFloat in some way? I want to play a sound file without having to deal with any files except the .swf!
I am new to CS5 and I want to create a demo where each scene has it owns sound file. So going from scene 1 to scene 2, the sound from scene 1 should stop and the sound of scene 2 should begin then after the sound file from scene 2 finish it will automatically go to scene 3 then the sound file from scene 3 will begin. Each scene has a jpg file in it to show the user what I am talking about.
ive made a button in the scene 1 which i have managed to navigate to scene 2 but when i click the button it goes to scene 2 but displays everthing that is in scene 1 in scene 2, how can sort this out so upon the button click in scene 1 it goes to scene 2 and only display content in scene2.
I'm looking for a piece of AS2 script that will open a different scene and play a label from inside a mc.So it should be something like...On release go to scene x and play x label from inside x mc.I can get to the scene via the button "on release gotoandplay scene 2 . Once in the scene I can get a button to gotoandplay themc.mc and the label.But what I really want to do is get the button on one page to go to the scene and play the label on the second scene.
I have a movie clip on a scene with a button inside. How can I make this button to go to play frames on the scene but not inside the movie clip in AS3.0?
I would like to attach a sound to a .fla file that starts to play when the file is opened. I have created a button and would like to be able to use this button for a visitor to the site to mute the sound. So, I'm trying to accomplish two things, first attach a .wav file, then get the mute button to work.
i am making an animation, i have about 8 scenes. for some reason it starts playing the sound from the next scene in the middle of the current scene. why?? i checked movie explorer and the sound is in another scene. does that sound like a flash bug, or just me? it is a big file, could that be it.
Im an aspiring flash game developer struggling with a bit of code in my upcoming game, I want to play a sound(A "ding") everytime the main character touches a cookie on stage. The main character follows the mouse cursor, and the cookies fall down from the sky.
I have scripted the cookies main class, with this function(which works fine) private function eFrame(e:Event):void{
Code: private function eFrame(e:Event):void{ this.y += 3;//move the bell slowly downwards if(this.hitTestObject(_root.mcMain)){//if this touches the main character _root.mainJumping = true;//make him jump
[Code].....
And I was hoping it would go into the library and play the sound bit named "bellSound" but it doesnt do this, instead nothing happends, not even any errors under the "Compiler errors" So no im a bit lost, as I do not know how to make this work, so a sound is played when the main character touches the cookie.
I've been trying to make a button to play a sound, I've created the button and have a sound in the library, but can't manage to get the button to play the sound!!! I get this error: 1120: Access of undefined property knock_sound.
I think I need to give the sound an instance name but it says I need to use AC2 to do that!!
The sound only plays when I hold the mouse button down. I need it to play when I click it. But it has to stop the sound from playing twice import flash.media.SoundMixer; this.addEventListener(MouseEvent.MOUSE_UP,f); function f(e:Event):void{ SoundMixer.stopAll(); } here is a link to my swf file [URL]
I have been working on flash in school, and the school upgraded from flash MX to flash CS5, i have then gone to make my project in AS3, however, it is very diffrent from AS2
My problem, is, all i want is a button to play a song from the libray (not from a URL on the internet like the code snippet) and my ICT teachers have no idea how to use AS3. I also need is a play, stop and pause button, and a volume control slider, i CAN do all these on AS2, i infact have it set up (but without a pause button) but, i cannot do this in AS3 and i need it done bady.
I have a sound in the library named RolloverSound and a MovieClip on the stage with instance name of btn. I hear this sound whenever I rollover btn and that's all I want it to do. The problem is is that it also sounds off when the swf loads and I don't want that.
I have an eventListener on a particular movieClip that triggers the timeline to play when clicked. This should play through a short tween, then hit another piece of actionscript in the last frame of that scene, which should take you to the next scene. I also have an audio file loaded into a soundChannel, as well as a few timers that operate a click prompt over the movieClip already mentioned. My bug is that if you click on said movieClip before the soundChannel is finished playing, all functions properly. However, if you wait for the sound to finish, this initiates a few timers that cause a prompt to fade in, telling you to click on the movieClip. If you click on it, still, everything works fine. But once the timers complete their work, and the click prompt fades back out, the tweens do not operate properly. If you then click on the movieClip, the timeline seems to play doubletime until coming to a stop() action in the next scene.
jumping from from scene to scene once the play head reaches the end in AS3? Scenes do not play one after another like they used to. Below is some code I found that works with errors, however I'm not using a MC like the code displays "mc1". Not really sure on how the MC fits in? import flash.display.Scene; var scene:Scene = mc1.currentScene;trace(scene.name + ": " + scene.numFrames + " frames");
I have a griddle_mc, bacon_mc, and BaconCooking.wav. I want to play the wav when the bacon is moved onto the griddle. If I move the bacon until it just touches the griddle the wav plays fine, but if I continue to drag the bacon_mc across the griddle the wav becomes loud and distorted, almost like it's playing multiple instances of the wav at the same time.
private function __handleSliceDown($evt:MouseEvent):void { slice1_mc.startDrag(true); }
I have a button that is actually a Movie Clip (so I can animate it). I want this button to play a sound. (But this isn't a sound question.) If I have a list of 20 sounds, and 20 instances of this button mc, how can I make it know which sound is being called for? If it were a normal button, each instance would have its own load- or attach-movie command. But since they're MC's, the invisible button hit is always the same. Is there a way to make it look to the MC's instance name to get which sound to load?
I need the video (scene 1) after play & stop will automaticlly go to scene 2. The scene 2 is a rotate images and will stay all the time to rotate in scene 2.
import fl.video.VideoState; import fl.video.VideoEvent; var foo:ExtendedFLVPlayback = new ExtendedFLVPlayback(); foo.skin = "SkinOverPlayMute.swf"; foo.startMuted = true; //set this to false, or not at all to start it unmuted foo.source = ""; foo.autoPlay = true;
Since flash player supports 5.1 surround sound, is it possible to send five different ActionScript controlled mono MP3-s to different audio channels in SWF? I'm planning an art project that has a touchscreen with five "Play"-buttons that play sounds in five individual speakers, as part of it. I'm going to use an USB 5.1 sound card.
I'm sure this is a common problem, I tried looking around on the forum for a problem like mine but was unable to find anything. I'm using Flash CS3, Actionscript 2.0, and am making a soundboard. I have two scenes, one that's the title screen, of which has a sound file loaded via the timeline, (I think) set to Event and Loop, and a button which takes you to the next scene and makes a short sound when it's pressed. My second scene has background music as well, also set to Event and Loop.
Problem is that when I press the button, the background music keeps playing into the next scene. I tried using putting stopAllSounds onto the button, but that makes the sound of the button stop as well, and I'd really like to keep it. I've been messing with this for days, and I can't figure it out.
I have the loading audio file at frame one. However, I want to play the audio only at specific frame or frame label. How do I do that? Below are my codes:
Quote: //start of sound section is for sound var soundReq:URLRequest = new URLRequest("FlashFiles/audioFiles/mySoundmp3"); var sound:Sound = new Sound();
[Code]....
The above plays the sound as soon as the .swf file is loaded. But I want to play at certain point in time, say frame number or frame label. I want to be able to put all my action script on frame one (or one location) instead of all over the time line.
var myVar:String = LoaderInfo(this.root.loaderInfo).parameters.myVar; var snd:Sound = new Sound(new URLRequest(myVar)); var channel:SoundChannel = snd.play();
Most of my flash movies have been reasonable sizes, but the one I'm working on now is kind of a beast. It's up against the 16000 frame limit, so I'm looking into ways to chop it up. The problem is that I need a way to keep my background music playing across multiple scenes or movies. Is there a way to start a sound file in one movie, and have it continue when another scene is loaded or when a second movie file is loaded with ActionScript?
