Professional :: Sound File Cut Off In SWF (CS5)?
Aug 28, 2010
I have a sound file that is attached to the Over state of a button.I open the Edit Envelope dialog box and change the In and Out points of the sound.On the Stage, with Enable Simple Buttons active, the sound works as planned, triggered on the Over state and playing the part that is indicated by the edited in and out points on the envelopeWhen I use the Test Movie command (or publish the file), the edited sound cuts off abruptly in the middle of the sound.
View 3 Replies
Similar Posts:
Dec 4, 2011
I have a sound file in my library that plays perfectly in the library - a song with jingle bell accompaniment.When the animation is saved as a swf file, the song is there, but the jingle bell accompaniment isn't.When I extract the audio track from the flash file with AVS software,the jingle bell accompaniment is missing.
Background:I do not have the original recording that I imported to my Flash project.Even when I did have it, the jingle bell percussion was missing. I don't knowt how to get the sound file out of the library to save it individually (in case re-importing it would solve the problem)I don't know how to make the sound file play when I'm working on the file. (If I did, maybe I could adjust it in the timeline?)
View 1 Replies
Jan 30, 2010
I am having a bit of a problem with the playback of a certain sound in my published file. I have a sound attached to a frame in my timeline and I have it as a stream so that it plays extactly where I want it to in the movie. When I publish my movie, however, the sound plays about 2-3 seconds before it's supposed to. I tried putting another sound file in its place and the other file plays early as well. The sound will also start early if it is an event
View 3 Replies
Sep 18, 2006
I am trying to export a .swf file which plays video/sound so I can upload the file to a website (embedded). However, the sound does not want to play when in flash. It is basically of a person talking and lasts about 20 seconds. I have exported the file as a .mov using flash mx pro on mac. the .mov file plays in a quicktime but when imported into flash the sounds seems to disappear.
View 1 Replies
Mar 13, 2011
I have a flash file with about 20 different scenes in it. And in one of the scenes there is an audio file that is 15 seconds long. The sound is on a menu page so i only want it in that scene. But if you are on that page for less than 15 seconds and go to another page then it carries on the sound into the next scene and if you go to and from the menu page to another scenes in quick succession you get a build up of sound which is horrible.
View 1 Replies
May 17, 2011
The audio is fine in the flash file but it is bad in the quicktime or swf file I exported.
View 4 Replies
Mar 16, 2009
I have to play a sound file and show the progress of the sound file being played. I am using import flash.media.Sound; import flash.media.SoundChannel; But the PROGRESS event gives theprogress of loading of file. I want to know of much of the song has been played and how much more is left.
View 3 Replies
Feb 13, 2012
I can use flash ok to build stuff, but I usually just build a flash presentation with movieclips and buttons all contained in the one file. I have never had to put my creations onto cd-rom before. So now I am looking at a CD-rom and seeing how someone else has done it and I see that all the .swf files are separated, as will as sound and video. I thought the only reason to do this would be to be able to access and change for example and mp3. without having to open the flash file, but I am thinking there are other reasons?
View 3 Replies
Jun 12, 2010
I am trying to create a soundboard and I have all my buttons and stuff, the only thing left is to put the sound files in. However, I have tried adding them to the library and dragging and dropping them over the HIT option like I usually do, but when I export the swf file, the sound file sounds terrible, it crackles and sometimes stutters a bit. I have tried setting these sound files to mp3 and raw in adobe options but with no luck. I am using actionscript 2.0 if that has anything to do with it. Also, I need these files embedded, not just linked.
View 2 Replies
Dec 1, 2010
I have created a SWF file that plays/stops sound. The SWF file works great when previewed in Flash CS4, but does not work when inserted in the HTML file.Here are the 2 files that are automatically generated when I INSERT>MEDIA>SWF in Dreamweaver CS4:
swfobject_modified.js
expressInstall.swf
Here is the ActionScript3 that I am using in the Flash file:
[code].......
View 6 Replies
Nov 11, 2009
I'm having some trouble getting the following code to work - trying to use the new Sound.extract() function to get two seconds of a Sound into a ByteArray, and then create a new bytearray with a WAV header, and then output the file. The resulting 'test.wav' file sounds very wrong although slightly recognisable? I think I may have some of the WAV header settings may be wrong but I'm not quite sure what's the matter and after a long time scratching
[Code]...
View 5 Replies
Nov 21, 2010
I have a long mp3 file hosted on a standard apache server (30 minutes long so far, but I would like it to work with longer sounds too).I'd like to start playback of this audio within at a specified point. When attempting to use Flash Actionscript 3, my basic tests show that ALL the audio from the start to the position I choose is buffered before playback (Sound.bytesLoaded was my friend here). If I start one second in, it takes about 3 seconds to start playback, 30 seconds in, takes about 25 secondsObviously with a really long mp3, like skipping playback to the middle of a 3-hour audiobook, this isn't going to be practical.Here's the ActionScript 3.0 code I'm using:
button.addEventListener(MouseEvent.MOUSE_DOWN, function():void {
var s:Sound = new Sound();
var req:URLRequest = new URLRequest("http://example.com/audio.mp3");
[code].....
View 1 Replies
May 21, 2010
I have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. (not sure if I'm able to give a link to it or not on here. If I able to and someone would like to see it let me know)I want to know if my flash header can support the following addionalunctionality/changes:1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features.
View 2 Replies
Oct 14, 2009
It's possible to play a sound file through AS, either by loading it from a folder or import it to flash. It's also possible to play a dynamic tone with flash.media.Sound + writeFloat.
But... is it possible to play a sound file with flash.media.Sound + writeFloat in some way? I want to play a sound file without having to deal with any files except the .swf!
View 9 Replies
Jul 29, 2011
Ive stumbled upon a few sites that have free sound FX's but the ones I want which I wuld think are the easiest to get I cant find.I want a sound for when someone clicks the right thing, like a under a sec tiriring or something like when you kill a guy in Leauge of Legends or something like that and also one for when you click the wrong thing like an windows warning ut a little different, yet all the sites and SFX I come across are for everything but those.
View 5 Replies
Jun 30, 2011
I have imported my wav files to my library added them to the down state of my buttons and when I test the file I get (Sound has no valid device sound path although exporting device sounds was requested in the export settings. This sound will be ignored.) I have been surching for an answer but as of yet have found none.
View 3 Replies
Aug 1, 2011
Flash is not in my toolset, but I am an old Director jock and have spent some hours dipping my head into the Flash manual. I suppose that makes me a promising beginner-level poster. I'm working in CS5.
I need to make a simple Flash-based sound player for a website for a newly-released novel (http://www.bearriverbooks.com/index.html). I want the user to click on what appears to be an icon (or image), which kicks open a simple controller and starts playing a sound file (a radio interview, which I will probably export using Flash's voice compression). Nothing fancy. Just want the visitor to hear the sound and be able to apply simple controls (stop/start/rewind/volume).
I can learn ActionScript, I suppose, since I used to dream in Lingo, but my life would be a lot simpler if I could just publish a controller without having to roll my own. I'd like to think there's a magic button somewhere that can do this, but I haven't found it yet.
View 4 Replies
Sep 8, 2009
I would like to attach a sound to a .fla file that starts to play when the file is opened. I have created a button and would like to be able to use this button for a visitor to the site to mute the sound. So, I'm trying to accomplish two things, first attach a .wav file, then get the mute button to work.
View 1 Replies
Dec 15, 2009
I have a problem that I have not found a syntax error or logic error to explain. It appears to be an obscure problem related to playing a sound file and graphic positioning in the same file. My next step is to look for any known bugs. I have posted the file at. URL] When the page loads you will see a list of selections. Do not click any of the html Play buttons In the graphic arrow pointing to the right is the play button click it and a default file will start. Click the pause button (which will be green while the selection plays) Then click the play button again. The knob that moves while the song plays, will begin moving from the position it was at the time pause was clicked.
Click the stop button (arrow facing left with vertical line at tip) Choose a selection from the html list by clicking the Play button next to it. Then click the play button in the player display. The title of selection will appear in the title area. repeat the original steps (play, pause, play) This time the knob that moves while song plays, snaps back to the start and moves from start, rather than from the pausedposition.
[Code]...
View 7 Replies
Jan 21, 2011
I have AS3 project, made with FlashBuilder. I'm using MovieClips from an external .SWC-file. In a MovieClip from the .SWF-file, I want to use an audio-file. Is it possible to preload a sound-file (e.g. .MP3) in my FlashBuilder project, and access it in a MovieClip inside the .SWC?
View 1 Replies
Apr 15, 2010
I've assigned a sound to the button over frame and a different one to the button down frame. When i over over the button the button over sound plays. When I then click the button, the button over sound plays AND the the sound I put in the button down frame plays.
View 8 Replies
Apr 16, 2011
I am triggering short sounds dynamically from the library for a game (Specifically Air for Android). When the user clicks a button the sound can take up to 600ms to actually play. I have set it for any silence before the actual sound by calling the sound like so:
[Code]...
All return the same results. I know there are threads here that talk about this but none have offered a real solution that I can find. Is there no way to cache the sound or store it in a buffer?
View 1 Replies
Aug 24, 2009
I am need a wide range of sound effects for flash projects.
View 3 Replies
Mar 17, 2011
I have made an animation. I have a layer where I put sounds that execute on certain frames. No script are involved. When I play the movie inside Flash, everything looks good and sounds are syncing. When I make a preview of the movie, some of the sounds are out of sync. I have no idea why, it's the first time I get this kind of problem. All sounds are set to event, but I have tried with stream as well and get the same result.
View 1 Replies
Apr 27, 2011
We have created a SWF file with sound. When importing that SWF into another FLA. file as a movie clip, the sound on the SWF is gone
View 2 Replies
Oct 20, 2011
I am inporting a .mov file into flash, adding graphics then exporting it as a .swf.
the video looks great when I play it back but there is no sound from the original .mov
how do I get the sound to work
View 1 Replies
May 6, 2009
If I use Publish Setting and choose a different folder for the .swf and .html file that Flash CS3 will be generating then the audio/sound will not work when open the .html file in a browser. However, if I choose to the "Publish" option or "Publish Setting" but choose the same folder for the .html and .swf folder then the sound will work when opening the .html file inside a browser.[code]
View 3 Replies
Mar 29, 2011
After building a flash using one of the players provided by KoolMoves in the interface, I checked to make sure the sound played properly and it did. I checked to be sure it was still in the contents file and it was. I uploaded it to my website and all plays great but I have no sound. I've checked to make sure my sound is not muted and speakers connected and all other sound plays fine. The progress bar for the player does not show when it is clicked eiither, as if there is no sound file in the player.
View 1 Replies
Mar 9, 2009
I am very very new to flash...I created a quick little slide show...in which I want to add to add an mp3 file too...the slide show works as such.. Each frame has a picture and next button, so when I test the movie. The pictures are stopped, I click the next button and it
goes to the next frame......pretty straight forward. How do I add sound? I just want the music to start when I open it, and stop when the slide show is over.
The funny thing is...if I insert music into a file with no buttons and just let it stream (and stop on the last frame) it works great, the music plays...Only now that I have a movie with buttons, it doesn't even start. I have been thumbing around the actions panel, but for the most part I'm lost.
View 6 Replies
Jul 25, 2011
Here is my code
onFrame (1) {
mySound = new Sound();
mySound.loadSound("http://www.mysite.com/spot_mixdown.mp3 ");
mySound.start(0, 0);
}
that play .mp3 file from my website at the first frame. It's work for me!
But when I update spot_mixdown.mp3 (change sound inside but use same filename) on my website and then reload webpage, a sound is not change.
View 2 Replies
