I have the follwoing array:
var botones:Array = new Array("first_btn", "previos_btn", "last_btn", "exit_btn", "script_btn", "interaction_btn", "document_btn");
if I use botones.visible = false; they do no disappear. How can I hide them?
im learning as3 and am trying to understand arrays so could an array be used in this situation i have 5 buttons which all need a ROLL_OVER, ROLL_OUT and CLICK mouse event is it easier to put all the buttons in an array and then use the array identifier to add the even listeners? or is there another way to do this? p.s if anyone can give me a few basic usages of arrays that you use in your experience. where to use arrays too
View 5 RepliesI am trying to use two buttons in an array that use the same information in that array, so I'm trying to lump them together so I don't have to write them separately. This is what I've come up with, which doesn't work. One of the buttons works, but the other one doesn't:
var arrNavigation:Array = [{button:(n1_mcButton, n2_mcButton), page:bucktown, popup:popUp1, imgNumber:9},
n1_McButton and n2_McButton are two different buttons, but all the other information is the same.Is it possible to write this more efficiently than listing the buttons out separately?]
If I have a bunch of buttons in an array, each with an event listener, and a user clicks on one, how do I find out which the user clicked on?
[Code]...
The buttons appear on the stage, and I can click them. In buttonHandler, variable i always contains array size + 1 (in this case, 10). Since this is out of bounds, this doesn't work. I'm guessing it goes through the whole for loop first, and then starts adding event listeners with the newest i value, so this method doesn't work.
As for the function inside a function for the event listener, it's the only way i know how to pass parameters into functions from event listeners. I really don't want to not use an array because there are going to be a ton of buttons (well over 500).
I have six buttons on my stage and whichever one is pressed send the playhead to the framelabel respectively, this is the code
Code:
numOfBtn = 6;
stop();
for (i=0; i<numOfBtn+1; i++) {
[Code].....
But before it goes to the framelabel I want the playhead to play first and THEN go to the framelabel..Should I remove this line gotoAndStop("frm"+(this.num+1)); and add it further down the playhead? It doesn't seem to work
Im workin with as3.. I've just created manually 10 buttons to wich i assigned istance names (btn_01,btn_02,btn_03, ecc...).
Now i wanna assign to them Mouse events for loading each one a different pictures when i rollover.
So i thought to put them in an array
bottoni:array=new Array();
bottoni [btn_01,btn_02,btn_03 ....];
but i think the value i put in the array (Example: btn_01) is not the istance name of my button already on the stage (cause when i say "trace bottoni[0]" the output is null)
I'm familiar with using arrays with for loops, where the buttons are created dynamically.However I'm building an application with calendar month grids, where maybe half the dates are clickable. How would I use an array to address these buttons so I don't have to write code for each individual button? Or is there a better way than using an array to keep my code as simple as possible?
View 2 RepliesHow can I make that when I press one of the button arrays then a movie clip loads in the frame where it sends me? for example on the company. And then the movie clip unloads and another loads when I click on tutorials? forexample.i just want that clicking a specific array button triggers the appearance of my movieclip in only the frame where the button sends me.ere's the code for the menu:
Caurina.Transitions.Tweener import;
var menu_label: Array = new Array ("Home", "The Company", "Online Store"
"Service Center", "tutorials", "Contact");
[code].......
I am kinda new to flash, but I have been able to navigate myself around enough to learn a thing or 2. I have an array of movie clip buttons that when clicked stays in the down position until a new button is clicked. When one of those buttons is clicked a movieClip goes accross the stage (above the other array) and 6 new options open up for a photographers gallery (Newborns, children, family, etc, etc, etc) I am trying to add an array to the new buttons that show when a portfolio button is clicked, but keep getting an error in the output panel saying something about trying to access a "null" object. I have put the new array script in the movie clip button "portfolio" and I have also tried in the main timeline.
I assume that my problem is that the movie clips for the buttons I am trying to add the array to dont really show up at all until the down status of the button. Or I could definietly be wrong. How would I add the array to the pop up buttons?
I have four buttons and I want to stick a preloader to every button clicked to load an external swf. My swfs and buttons are in array and so is my preloader, but I cant bring my preloader mc to my progress load event! I need to pass the movieclip from a button click event to the load event=)
My code:
ActionScript Code:
var path = content.nav;
var butts:Array = [path.butt1,path.butt2,path.butt3,path.butt4];
var loaders:Array = [path.buttLoader1, path.buttLoader2]
[Code].....
I currently have many buttons and respective hotspots that run using repetitive actionscript code. I would like to replace this with more efficient arrays.For example, I have a hotspot called btnCommercials and it's respective movieclip called commercials.
ActionScript Code:
var btnArray:Object = [
{btn: btnCommercials, mc: commercials},
{btn: btnMusicVideos, mc: music_videos},
[code]....
I have an array of buttons - for example "Save & Exit", "Cancel" and "Exit". When one of the buttons is hit I call "button.addEventListener(MouseEvent.CLICK, displayMessage);". In displayMessage, I have a switch statement to determine what button is depressed. However, I don't know how to identify what button is pressed. See question marks below:
private static function handleMenu():void {
// Determine which menu button was pressed
switch (????) {
[code]......
i have a series of buttons in an array, and i want to change the alpha of all of the buttons when a button (outside of this array) is clicked. i can change the alpha of all of the buttons inside the for loop, but not when the button is clicked. (the button is functional and being referenced correctly, as the trace does work.)what do i need to do differently to be able to control these buttons?
Code: Select all
var theBtns:Array = [btn1, btn2, btn3, btn4, btn5, btn6, btn7, btn8];
for(i=0;i<theBtns.length;i++){
[code]....
Working on my website navigation system with for loop and arrays. Here is the look right now top right nav working.Im trying to have the word links fade in white on mouseOver and fade to blue onpress. and fade back to normal when another button is pressed. any suggestions on how i should go about doing this?I was thinking of duplicating the arreay of buttons but have the mouse over fade in the white font array buttons on mouse over. But not sure if that would be a good idea or if it would work.
View 2 RepliesI have a hundred buttons on the screen. I also have an array containing a list of all 100 buttons.Now, I want to use the same onRollOver method for every button. I DON'T want to program each button separately.
I am thinking something along these lines:
[code]...
Can I do this using an array?
I'm familiar with using arrays with for loops, where the buttons are created dynamically. However I'm building an application with calendar month grids, where maybe half the dates are clickable. How would I use an array to address these buttons so I don't have to write code for each individual button? Or is there a better way than using an array to keep my code as simple as possible?
View 7 RepliesI want to create an array of buttons, the buttons are called popupone, popuptwo, popupthree etc.
When the scene is loaded these buttons visibility is set to false so they are invisible. I want to be able to randomly pick one of these buttons from the array and display it to the screen _visible = true.
I have 6 "status" buttons as movieclips... and I have a separate menu with the same options as the 6 status buttons. When I click a menu option from that separate menu, I'm trying to dim out the 5 buttons that are inactive leaving the item chosen active.
Here is the code that I have so far but when I click one of the menu items, all of the buttons dim instead of all but the item clicked.[code]...
I've got a column of buttons that load dynamically with attachMovie, and are named in the for loop as "patentBtn"+i+"_mc" etc.
When I address them in the code like this:
Code:
patMenuHolder_mc.patentBtn0_mc.onRelease = function(){
gotoAndStop("Claims1");
patMenuHolder_mc.patentBtn0_mc.gotoAndStop("active");
[Code]......
I have 8 buttons in an array.I need to do a shuffle on the array where the buttons are randomly placed in the same array.
View 1 RepliesI need 6 buttons to control the same array. it's a list of 12 things.
Button1 loads the first image in the array
Button2 loads to the next image in the array
Button3 loads to the previous image in the array
Button4 loads the 1st image in the array (yes two buttons to do the same thing but it's necessary)
Button5 loads the 4th image in the array
Button6 loads the 7th image in the array
Button7 loads the 9th image in the array.
on top of that if no button is pressed the next image in the array moves forward after 15 seconds.how to do this with a set of images. Eventually the Array will become an xml document which accesses images, and two text fields.
I'm still stuck on this! I've tried so many things and still can't get it to work. I've watched Tim Perkins' Lynda.com stuff and I still can't get this to work!
This is where I'm at now with the code. It works to an extent, but doesn't lock out the other bArrays when the first one is clicked. I would like the code to stop bArray2 & bArray3 from functioning when a button in bArray1 is clicked. Is this at all possible?[code]...
a lot of the details and actionscript for my project were dealt with in another thread[URL].. what I would like to do is use buttons to jump between videos that are being fed to flvplayback, I have the actionscript skills of a rural victorian coal miner, fortunately I have the drive and bloody mindedness of a rural victorian coal miner so hopefully these things should balance out.
the action scrip I have scrawled for my button so far is as follows...
function introductionHandler(evt:MouseEvent):void{ // load given movie videoIndex = 0;}introduction_btn.addEventListener(MouseEvent.CLICK,introductionHandler );
//AS BEGINS
var productList:Array = Array("diabeoff", "cholestoff", "inulina", "colageno", "power", "castoff", "dieta", "miel", "extrapower");
[code].......
var new_array:Array=new Array(5,4,5,6);for each (var number:Number in new_array){ var but.number]:box=new box(); // here i don't know how to declare but.x=50; but.y=50; addChild(but); but.x+=50; }
[code]......
I want to have an array of buttons that each move with mouseover and mouseout. Then once user clicks the button the image is loaded from an array and put onto the screen. Once another button is clicked say B2 the B1 image is removed and a new image replaces it. Here is the working code up to this point with no errors; I am using Flash cs5.
[AS]
var buttonArrayportfolio:Array = [ B1, B2, B3, B4, B5, B6, B7, B8];
for each( var B:MovieClip in buttonArrayportfolio) {
B.mouseChildren = false;
B.addEventListener( MouseEvent.MOUSE_OVER, onButtonOver );
B.addEventListener( MouseEvent.MOUSE_OUT, onButtonOut );
[Code] .....
I'm trying to generate a button with the loop of an array, But I can't make the icon style and the stylename work.
for (var x:int = 0; x < smileys.length; x++ ) {
var emoticon:Button = new Button();
var label:String = smileys[x][0];
emoticon.width = 24; emoticon.height = 24;
emoticon.x = positionX; emoticon.y = 0;
[Code] .....
What I thought was going to be easy was far from.I have several pages on a flash project that have buttons nestled in a movieclip.The seemingly simple question is how do I get one to stay in the down state after rolling off and retaining that state until another is clicked.This is the code I've generated so far that disables the button after clicked and enables when another is clicked, however it doesn't stay in the down state, after roll out they revert back.
Code:
var buttons:Array = new Array("home", "portfolio", "contact", "about");
home.onPress = function() {
buttonOver("home");[code]..........
I have 3 buttons on the stage, and I want to make it so when you click on the different buttons it changes how the array is sorted. The buttons change position on the screen when they are pushed, so I was trying to build my code based on their positions. Not sure if that is the best way to do it. I have the array coming from an xml. This is my first time dealing with xmls and I am new to AS3 and flash, so please excuse the sloppy code. This is the part of the code I am having trouble with. It does the "else" statement fine, but won't change with the buttons.
[Code]....
I'm trying to assign Event Listeners to buttons in an array and increment the function referenced in those listeners by 1 so the functions have unique names, is this possible?
ActionScript Code:
//ROLLOVERS FOR MENU
var btnsAry:Array = [hs1_mc, hs2_mc, hs3_mc, hs4_mc, hs5_mc, hs6_mc];
function setButtons():void {
for (var i:int=0; i<btnsAry.length; i++){
btnsAry[i].id = i;
[Code] .....