I'm familiar with using arrays with for loops, where the buttons are created dynamically. However I'm building an application with calendar month grids, where maybe half the dates are clickable. How would I use an array to address these buttons so I don't have to write code for each individual button? Or is there a better way than using an array to keep my code as simple as possible?
View 7 RepliesI'm familiar with using arrays with for loops, where the buttons are created dynamically.However I'm building an application with calendar month grids, where maybe half the dates are clickable. How would I use an array to address these buttons so I don't have to write code for each individual button? Or is there a better way than using an array to keep my code as simple as possible?
View 2 RepliesAn external swf is loaded using this code...
[Code]...
The problem is that even though this external movie covers the whole stage, My mouse can still "see" buttons that are on the stage, and I can click them. I don't want to be able to click the buttons through my external movie.
im learning as3 and am trying to understand arrays so could an array be used in this situation i have 5 buttons which all need a ROLL_OVER, ROLL_OUT and CLICK mouse event is it easier to put all the buttons in an array and then use the array identifier to add the even listeners? or is there another way to do this? p.s if anyone can give me a few basic usages of arrays that you use in your experience. where to use arrays too
View 5 RepliesI am trying to use two buttons in an array that use the same information in that array, so I'm trying to lump them together so I don't have to write them separately. This is what I've come up with, which doesn't work. One of the buttons works, but the other one doesn't:
var arrNavigation:Array = [{button:(n1_mcButton, n2_mcButton), page:bucktown, popup:popUp1, imgNumber:9},
n1_McButton and n2_McButton are two different buttons, but all the other information is the same.Is it possible to write this more efficiently than listing the buttons out separately?]
On the stage I have buttons that should load different swf. Usually I should put all the code on a single "action" layer. But, it is not what I want to do I have a movie clip that I want to play before the loading ( button click - movie clip - loading the swf).
So I put this code at the en of the movieclip:
var mLoader:Loader = new Loader();
var swf;
var mRequest:URLRequest = new URLRequest(swf);
function startLoad() {
mLoader = new Loader();
[Code] .....
If I have a bunch of buttons in an array, each with an event listener, and a user clicks on one, how do I find out which the user clicked on?
[Code]...
The buttons appear on the stage, and I can click them. In buttonHandler, variable i always contains array size + 1 (in this case, 10). Since this is out of bounds, this doesn't work. I'm guessing it goes through the whole for loop first, and then starts adding event listeners with the newest i value, so this method doesn't work.
As for the function inside a function for the event listener, it's the only way i know how to pass parameters into functions from event listeners. I really don't want to not use an array because there are going to be a ton of buttons (well over 500).
I have six buttons on my stage and whichever one is pressed send the playhead to the framelabel respectively, this is the code
Code:
numOfBtn = 6;
stop();
for (i=0; i<numOfBtn+1; i++) {
[Code].....
But before it goes to the framelabel I want the playhead to play first and THEN go to the framelabel..Should I remove this line gotoAndStop("frm"+(this.num+1)); and add it further down the playhead? It doesn't seem to work
Im workin with as3.. I've just created manually 10 buttons to wich i assigned istance names (btn_01,btn_02,btn_03, ecc...).
Now i wanna assign to them Mouse events for loading each one a different pictures when i rollover.
So i thought to put them in an array
bottoni:array=new Array();
bottoni [btn_01,btn_02,btn_03 ....];
but i think the value i put in the array (Example: btn_01) is not the istance name of my button already on the stage (cause when i say "trace bottoni[0]" the output is null)
I wanted to make each button load an swf.How do I connect a button to loading a swf?
contentButton1.addEventListener(MouseEvent.CLICK, N);
function N(e:MouseEvent){
var request:URLRequest = new URLRequest("N-Infant.swf");var loader:Loader = new Loader()loader.load(request);addChild(loader);
I've ceated 18 buttons 1-18 on two rows and using the alignment tool made then all gapped the same and in line etc.
I now want to center the two rows of buttons on the stage.
I've shift clicked to select all the buttons but no matter what option I pick in window alignment I can't get it to work.
Anyhow, I have a few buttons (six of them) to scroll from left to right non-stop via looping. Those buttons are in the up state. What I want to achieve is that when someone hovers over one of the buttons, the entire scrolling temporarily stops and perhaps the hovered button becomes larger as well. I'm sure you've seen something similar on ebay listings before shown as slideshows.
my Over buttons are managed via movie clips, but not the Up state buttons.
I want to have serveral different words to appear on my stage with their own buttons. Here is my code for your review.
Process.visible = false;
Cycles.visible = false;
stop();
function playMovie(event:MouseEvent):void {
play();
[Code] .....
I have several buttons on stage (8), and I want to add a slighty different action for everyone of them. How do I do that, All the buttons always get the last past of the "FOR"..
Code:
function loadThumbs(eventoUrl:String) {
for(i=1; i<=9; i++) {
temp = this["thumb_"+i];
with (temp) {
image = "fotos/"+eventoUrl+"/thumbs/"+i+".jpg";
loadImages(image, temp);
temp.onRollOver = function() {
this.play();};
temp.onPress = function() {
this.loadImages(image, image_big);
};};};};
loadImages() is a LoadMovieClip type function I created.
how I could resize my swf stage with buttons and change the look of things, without affecting what's in the webcam / chat area of something similar to this: [URL]
View 1 RepliesI have several button symbols on my stage, some of which are enabled while some are not (I enable/disable them using actionscript).I just need a way to access the "enabled" property of all the buttons on the stage so that I have an array which has the full path of enabled buttons and another for the unenabled buttons. That way, in case I have to lock the screen by disabling all the buttons, I'll know which ones to enabled once I turn them back on.
View 4 RepliesHow can I make that when I press one of the button arrays then a movie clip loads in the frame where it sends me? for example on the company. And then the movie clip unloads and another loads when I click on tutorials? forexample.i just want that clicking a specific array button triggers the appearance of my movieclip in only the frame where the button sends me.ere's the code for the menu:
Caurina.Transitions.Tweener import;
var menu_label: Array = new Array ("Home", "The Company", "Online Store"
"Service Center", "tutorials", "Contact");
[code].......
I am kinda new to flash, but I have been able to navigate myself around enough to learn a thing or 2. I have an array of movie clip buttons that when clicked stays in the down position until a new button is clicked. When one of those buttons is clicked a movieClip goes accross the stage (above the other array) and 6 new options open up for a photographers gallery (Newborns, children, family, etc, etc, etc) I am trying to add an array to the new buttons that show when a portfolio button is clicked, but keep getting an error in the output panel saying something about trying to access a "null" object. I have put the new array script in the movie clip button "portfolio" and I have also tried in the main timeline.
I assume that my problem is that the movie clips for the buttons I am trying to add the array to dont really show up at all until the down status of the button. Or I could definietly be wrong. How would I add the array to the pop up buttons?
I have the follwoing array:
var botones:Array = new Array("first_btn", "previos_btn", "last_btn", "exit_btn", "script_btn", "interaction_btn", "document_btn");
if I use botones.visible = false; they do no disappear. How can I hide them?
I have four buttons and I want to stick a preloader to every button clicked to load an external swf. My swfs and buttons are in array and so is my preloader, but I cant bring my preloader mc to my progress load event! I need to pass the movieclip from a button click event to the load event=)
My code:
ActionScript Code:
var path = content.nav;
var butts:Array = [path.butt1,path.butt2,path.butt3,path.butt4];
var loaders:Array = [path.buttLoader1, path.buttLoader2]
[Code].....
I currently have many buttons and respective hotspots that run using repetitive actionscript code. I would like to replace this with more efficient arrays.For example, I have a hotspot called btnCommercials and it's respective movieclip called commercials.
ActionScript Code:
var btnArray:Object = [
{btn: btnCommercials, mc: commercials},
{btn: btnMusicVideos, mc: music_videos},
[code]....
I have an array of buttons - for example "Save & Exit", "Cancel" and "Exit". When one of the buttons is hit I call "button.addEventListener(MouseEvent.CLICK, displayMessage);". In displayMessage, I have a switch statement to determine what button is depressed. However, I don't know how to identify what button is pressed. See question marks below:
private static function handleMenu():void {
// Determine which menu button was pressed
switch (????) {
[code]......
i have a series of buttons in an array, and i want to change the alpha of all of the buttons when a button (outside of this array) is clicked. i can change the alpha of all of the buttons inside the for loop, but not when the button is clicked. (the button is functional and being referenced correctly, as the trace does work.)what do i need to do differently to be able to control these buttons?
Code: Select all
var theBtns:Array = [btn1, btn2, btn3, btn4, btn5, btn6, btn7, btn8];
for(i=0;i<theBtns.length;i++){
[code]....
Working on my website navigation system with for loop and arrays. Here is the look right now top right nav working.Im trying to have the word links fade in white on mouseOver and fade to blue onpress. and fade back to normal when another button is pressed. any suggestions on how i should go about doing this?I was thinking of duplicating the arreay of buttons but have the mouse over fade in the white font array buttons on mouse over. But not sure if that would be a good idea or if it would work.
View 2 RepliesI have a hundred buttons on the screen. I also have an array containing a list of all 100 buttons.Now, I want to use the same onRollOver method for every button. I DON'T want to program each button separately.
I am thinking something along these lines:
[code]...
Can I do this using an array?
I want to create an array of buttons, the buttons are called popupone, popuptwo, popupthree etc.
When the scene is loaded these buttons visibility is set to false so they are invisible. I want to be able to randomly pick one of these buttons from the array and display it to the screen _visible = true.
I have 6 "status" buttons as movieclips... and I have a separate menu with the same options as the 6 status buttons. When I click a menu option from that separate menu, I'm trying to dim out the 5 buttons that are inactive leaving the item chosen active.
Here is the code that I have so far but when I click one of the menu items, all of the buttons dim instead of all but the item clicked.[code]...
My dynamically loaded background is overlapping my buttons for audio on the stage.
My .fla is located at www.saleck.net/TEMP/U0863279.7z
There are 4 buttons and a Text box on Frame 1, but the background that is loaded in the code overlaps.
I will be having probably hundreds of objects on the stage, which would be very big, at least 4000x4000px. I wanted a way of panning around, either with the mouse or with buttons. I basically want it to work like Googlemaps does. It can't be a single image as everything on the stage is moving and dynamic, coming from an SQL database. Flash was the only way I could think of to bring a graphical map alive from SQL data.
View 3 RepliesI want to disable all buttons on the stage when a certainevent trigger. Some of the buttons are already on the stage (manuallyplaced) at the startup and others are placed dynamically usingactionscript.Do I really have to assign each button a code telling them tobe disabled or can I target them all at onc
View 1 Replies