ActionScript 3.0 :: Collision Only Works With One Clip?
Oct 24, 2010
I have a collision going on between two clips, clip A and clip B. I tried to copy and paste clip A, but then clip B would only interact with one of them... not both.
Is there a way to get this to work with both? I tried adding clip A to an array, and checking for a collision with the array with
for(var i:uint = 0; i < TestArray.length; i++){
if (A.hitTestObject(TestArray[i])){
do something
but it still only works with one of the clips.
View 1 Replies
Similar Posts:
Jul 21, 2009
I'm developing application with 7 laughing balls randomly floating at all directions on the stage.The app. uses Collision Detection AS so that when the balls collide, they bounce away from each other, also away from the frame.Everything is working prefect, BUT only for 5-10 min.After that, there is a reduction in the speed the balls move, and eventually the Collision Detection stop working and the balls get'glued' one on top of each other.[code]
View 0 Replies
Apr 11, 2011
I have a movie clip (with instance name rectangle_mc) on the stage. Within this movie clip there are two separation animations on the timeline. The ROLL_OVER animation starts on frame "over" and the MOUSE_OUT animation starts on frame "off." If I roll over the movie clip, the initial animation plays, and when I mouse out the other animation plays to restore it to it's initial state. However, once the rollover animation has played once, it will not play again when I roll over it again, but for some reason the MOUSE_OUT plays every time.
[Code]...
View 1 Replies
Jun 22, 2005
i am making a pacman game, and i need to know how to make it go to a certain scence when a movie clip collides with another movie clip.
View 2 Replies
Apr 24, 2002
Can someone tell how to add a soundclip (*.wav) to the following scenario:[code]
View 2 Replies
Aug 21, 2011
I want to navigate a maze and therefore I want to create collison detection with the maze itself, but when I try the collison is made with the entire maze movieclip, so even if my character is safe in a corridor without touching the walls of the maze it still counts as collisons.
View 1 Replies
Jun 16, 2005
Is it possible to make a collision detection between a separate movie clip and another movie clip that is with a movieclip thats on the same layer as the seperate one?
View 8 Replies
Jun 7, 2010
I would like to drag and drop multiple objects and on collision activate/play a video clip.
View 3 Replies
Oct 16, 2009
In my file (AS2), I have a small square at the middle of the page. Diagonally to the right, I have a vertical wall which is a rectangle. Pasted inside my small square, I have the code:
onClipEvent(enterFrame) {
if (Key.isDown(Key.RIGHT)) {
if (this.hitTest(Wall._x, Wall._y, false)) _x =
[code]......
View 1 Replies
Nov 11, 2009
I have a button in a Flash project I've made. It's used to jump to another place on the root timeline, labelled "Why". It used to work perfectly.I have now placed the button inside a movie clip (it has to be in an animated sequence), but now it no longer works. It appears to work fine, the rollover state works and all. But when clicked it does nothing.The code I use to work the buttons goes on the main timeline, the code for this button is:mc_anim_backdrops_menu.btn_subsection1.onRelease = function() { gotoAndStop("Why"); _global.swfloaded = "";}Why does it no longer work? and what can I do to fix it?The question is posted here over at Experts Exchange URL...what we've tried there is tracing the problem. The code seems to be pointing to the right place, but none of the actual function works.. as you'll be able to see if you open up the attached file (and change it's extension from .txt to .fla to get it working)
View 3 Replies
Apr 21, 2008
I have a blank movie clip on the stage with drag and drop capabilities and it works fine!!
That is, until i call the loadmovie() function and attach an image into the empty movie clip.
why the movie clip is no longer draggable when content is loaded into it?
Code:
function downloadImage(file:Object):Void {
var Pic = "./files/" + file;
loadMovie(Pic, "_root.imageLoader");
[Code]....
View 1 Replies
May 17, 2011
I have a movie clip that is a navigation window and I am trying to have some tooltip hover over the buttons inside the navigation window.
If I create a button on the main stage it hovers and works fine but if I create the same clip inside the embedded navigation window the tooltip does not show up. I do not have any error messages but it is not there that I can see.
View 5 Replies
Sep 3, 2010
I've been creating this banner: [url removed] which accesses an xml document, replaces some texts etc, but as soon as you open it up in a browser (like with the dropbox link I pasted) the banner only loops on the first movie clip. Put in another way: The banner you see is looping through only the first movie clip. But the swf file (and the html file) work fine from the local path of my computer.
View 1 Replies
Sep 14, 2009
I worked on a new Flash project, but I cant seem to find a good solution for how I want my objects to collide. In my project I have: a Ball(moving object) and a Floor(not moving).
The ball is positioned over the floor and drops onto the floor through the gravity that is applied with the code.
[Code]...
Is there a way to have a global gravity in flash AS3. In which you could choose what objects you want to be affected by it? Is there a way to have a block of code that separates moving from still objects and will not let any objects collide(not overlap)?
View 1 Replies
Sep 14, 2009
In my project I have: a Ball(moving object) and a Floor(not moving).The ball is positioned over the floor and drops onto the floor through the gravity that is applied with the code.
[code]....
First: the -23 in the code is what I don't like. Second: every single object that deals with collisions would need to be put into the if statement.Is there a way to have a global gravity in flash AS3. In which you could choose what objects you want to be affected by it?Is there a way to have a block of code that separates moving from still objects and will not let any objects collide(not overlap)?
View 2 Replies
Jan 7, 2010
What kind of code would one need to check for collisions between two symbols? I am hoping to become a game designer so this is important for future references.
View 8 Replies
Jun 21, 2010
Im currently working on a demo flash game built on AS 2.0. im a very beginner to this flash and AS and im stuck up with a very silly concept though im not able to overcome it. the problem i have is with collision detection ie hit test and im really struggling with it.
[Code]....
View 1 Replies
Jan 31, 2010
I am trying to use boxes for hit collision. I want to be precise with the collision so I was thinking about making multiple small boxes and checking for collision that way. This maybe a stupid idea or a smart one. If I do this way will that affect the performance of the game even though the boxes are invisible and wont be drawn on the stage.
map out the object starting from its center outward. Like right, left, top and bottom. I am creating a flying shooter so the plane has a long wing span. I could also map out the wing span and tail and so on.
View 2 Replies
Sep 14, 2009
In my project I have: a Ball(moving object) and a Floor(not moving).The ball is positioned over the floor and drops onto the floor through the gravity that is applied with the code.
Code:
var gy:Number = 0;
var gravity:Number = .2
function ballMovement(event:Event):void{
[code]....
First: the -23 in the code is what I don't like.
Second: every single object that deals with collisions would need to be put into the if statement.Is there a way to have a global gravity in flash AS3. In which you could choose what objects you want to be affected by it?Is there a way to have a block of code that separates moving from still objects and will not let any objects collide(not overlap)?
View 1 Replies
Feb 2, 2010
suppose I have a set of movieclips on stage. Each movieclips has its own name. I can drag one of these and check when my dragged movieclip collide with the other ones. Is there a way to determine the name of the movieclip that was hit by the dragged one without having to use a for-loop statement and/or array?
View 2 Replies
Oct 16, 2010
Im using CDK, and I want to exclude color black.im using this: __collisionList.excludeColor(0x00000000);
View 5 Replies
Jun 7, 2007
I have two particles (mc's) that are linked together to a line. Both particles use xspeed and yspeed when they are moving.
Then to my question.. how will the particles xspeed/yspeed change when the line collide into another movieclip? I know how I can check the collision, but I don't know how I'm going to change the speeds.
I have to use (in the very collision moment);
particle_1's xspeed/yspeed
particle_2's xspeed/yspeed
the lines rotation the direction the line came from the length of the line where on the line it collides
View 4 Replies
May 3, 2009
Its been many years since I've used flash and I was just wondering what the easiest way to do collision detection was now. I know that there was some hit test bounding box stuff present earlier but I don't know the capabilities of flash cs4 and the advances that have been made. Google searches have yielded things like complex pixel-perfect collision detection but not a lot seems to have been written about CS4 yet.
View 3 Replies
Feb 10, 2010
I am trying to create collision detection between mcs without having to write the code 10 times.
I thought this would work but it gives me this error:
TypeError: Error #1034: Type Coercion failed: cannot convert "crisisAnimation" to flash.display.MovieClip.
at ImagineServicesText2_fla::MainTimeline/hitTester()
Code:
var target_mc:Array = new Array();
var numTextBoxes:Number;
target_mc = ["crisisAnimation","eventTextAnimation","mediaRelationsAnimation", "mediaAnimation", "graphicAnimation", "webAnimation", "advertisingAnimation"];
[code]....
View 4 Replies
Mar 19, 2009
I am trying to get some collision detection working. What I have is a ball moving around the stage. There is a box in the middle which when the ball hits, I would like it to bounce off the box. I can get the x axis working fine using hitTestObject but when I detect for collisions on the y axis, the two axis conflict. Does anyone have a way of doing this properly?[code]
View 4 Replies
Dec 11, 2010
I am making a game and it has falling objects (similar to shooting) and it also has some other random generating objects going to the other direction. So the objects aren't already on the stage. I was wondering if when I spawn them if I could put them in an array or something and check collision between the two arrays or what?
View 3 Replies
Mar 28, 2011
With AS3 I managed to resolve the problem I said in the thread, but now I face a new problem.If you hit the wall, it will register a collision as it should. Goes the same for the exit. But if you look to the upper left, there's a rotating rectangle. If you hit the rotating rectangle, it will register a collision IF YOUR CURSOR MOVED.That's right, if you freeze the cursor in place as the rectangle comes sweeping in, it WILL NOT register a collision, meaning if it were a maze game, people could cheat by just staying still.I forgot, here's the code:
Code:
stop();
stage.addEventListener(MouseEvent.MOUSE_MOVE, detectHits);
[code]......
View 2 Replies
Aug 25, 2008
So I've been googling around for information on detecting collisions in AS3 and I found this page which has what troy claims to be a 'pixel-perfect' collision detection algorithm:[URL]..
[Code]...
View 1 Replies
Dec 4, 2009
I've found the BitmapData.hitTest() function very handy, but limited for my purposes. I need to figure out at exactly which point the two images collide (in any coords system,really), since their behaviour will change depending on the angle of the surface hit
View 9 Replies
Dec 18, 2009
i have one ball and one rectangle in my fla file. i have finish to move ball using arrow on keyboard. but i want to check the collision when the ball hit the wall. i just can check the collision on the right side of the wall, the collision isn't work on the left, bottom and the top side of the wall
View 8 Replies
