The "Copy Motion as XML" option works fine for classic tweens, but when I use it with a new tween, no keyframes are created.
I'm actually okay with using the actionscript version this time around, but I'd like to know if there is a way to export a newer tween as an XML file, since it's quite a bit cleaner than the actionscript equivilent.
I have animated a slideshow effect where one frame moves out teh way and another moves into framei am happy with it and now want to repeat it with all teh other images in the slideshowthe problem is, when i copy the keyframes (with a tween) on the first image that I did and try and paste them onto the 2nd image in my series, it actualy charges the image as well ! So that the second image becomes the firts image on the keyframes.Is there a way just to copy the opacity and motion animation ONLY ? My guess is there must be because to animate each picture by hand with a custom ease in & out curve would take forvever
View 3 RepliesMy situation: I've got 7 frames of animated motion that is exactly the way i want it. I want these 7 frames of motion to loop so it gets to around 300 frames. So rather than doing every frame manually (which takes ages) i went to copy and paste motion.
So i highlight my 7 frames and click 'copy motion'. Then I try pasting them and i get the error mesage (in the attached picture) that nothing is selected. But i've clicked on the 8th frame, the place were i want the motion to begin, but still it says this error message.
So then i insert a new frame on the 8th frame space and paste the motion over the top of the 8th frame, but it misses the first 2 frames of animation (therefore messing eveything up) out and the motion is also wrong on top of that!
Here is the code I get when I do a motion tween in cs4 and select Copy Motion as AS3. I want to add this event but I don't know where to add it? WANT TO ADD THIS EVENT TO HE CODE BELOW: MotonEvent.MOTION_END.
[Code]...
I made a simple animation with motion tween, and hope to copy the animation. I selected all the frames, and right click, but the copy motion option is gray!!!!
View 4 RepliesIs there no way to do this from the timeline? I have a layer on the timeline with a MovieClip. It's set for motion tweening. On Frame 30 it has a keyframe for all tween properties ( rotation, scale, position, etc ).I want to copy those and set them on frame 1 using the Timeline editor.
View 3 RepliesIF you copy a motion tween as an AS how do you insert the code so that it still performs the motion?I created a motion tween, copied it, deleted all frames, made just 1 frame, placed the object on the frame (from the library with the same name used in the original tween) pasted the AS onto that frame of the relevant layer but it does not work
[Code]....
A web channel streaming service streams to a certain IP range, it only checks the IP in example.com/cmd.php?id=xxx (channel number) and outputs an rtmpe stream URL, nothing else.How do I trick it to get my local URL instead of the one on their server? I have considered squid proxy, but is there some way to do it with a firefox plugin or greasemonkey script?
Edit:I will try to specify:It's a streaming service from an ISP and cable provider. They stream for free to people on their IP's. On their webtv page, which is called webtv.example.com, there is a flash player. If you are not on an IP from their ISP, you can't stream anything but the test channel.When you try to change channel via. javescript:videoplayer_changechannel(xxx) it makes this HTTP request:
[URL]
If you are on one of their IP's you will get an RTMP URL, like this:
[URL]
This is what the flash player requests, and if it get's this response it load the channel requested. There is no HTML on the php page, just the URL. Note that the rtmp URL is static.If you are not on one of their IP's it will return a random sentence (something stupid, the programmers having fun).I wan't to trick the flash player into getting the right value, even though it's not on one of the ISP's IP's.
How can I copy files with FLfile.copy method in CS4? I need any samples with all classes.
View 0 Repliesi need to copy a "dynamic text" using copy button. how can i do it ?
View 5 RepliesIf I perform a motion tween along a curved path, Flash CS4 does not allow to change the curves to "corner point" or "linear" in the motion editor. URL...
View 2 RepliesI have been searching far and wide for a solution on how to offer slow motion and fast motion options for users that upload video to my webstie. There is an implementation on Google Video that has exactly what I am looking for: the option to speed up or slow down the video and continue to play the audio. The screenshot is below. I know that Flowplayer has an option to slow down or speed up video when implemented with Wowza server. However, when using that approach, there is no sound.
I have also seen the option from Enounce called MySpeed that allows video to be slowed or quickened, but this requires a browser plugin which is too much of a barrier for our users. How does Google do it? How can you add an option to a flash player to slow down or speed up video?Here is a screen shot. You can see the option to change the speed of the video to 1.5x. It also has options to go to 0.5x, 1.25x, 1.5x, 1.75x, 2.0x, 2.5x, and 3.0x.
I would like to create a polygon that changes its shape (circle, trapezium, square, rectangle, triangle) based on specific buttons that the user clicks? An existing shape has to be able to morph into all the others. For instance, the trapezium has to morph to a square, circle, rectangle or triangle.
If I were to create each transition manually, I would end up with 5x4=20 scenes. Is there a way that I can just assign each shape to its own frame, and deploy actionscript to set in motion the transitions from one frame to the 4 other possible frames? I am very grateful to anyone to just point me in the right direction,
How do I add motion blur to a motion tween?
View 2 Repliesim writing AS3 under linux and as such do not have access to ANY of the fl.* packages, including tweens, motions, special animations and components. I can only use Math.* and XY Grid Coordinates to calculate motion manually.
I can make movement of sprites fairly easily on a coordinate system, but this restricts how the path can go. Usualy only an up,down,left,right movements for the simplest math. I suppose this could be expanded to move in more varied directions but its not quite what im looking for.
I would like to be able to draw an invisible line that a shape can follow. Then it can have curves or bends in it without problem. I want to then start the sprite at the 1st pixel of the line and set its next coorinate based on where the line is at, but at 10px down it (and so on) till it reaches the end of the line. Is it possible because I cant think of a way? Are there any other good PureAs3 motion tutorials around?
I'm getting the following error: Motion tweening will not occur on layers with ungrouped shapes or on layers with more than one group or symbol. I don't have any ungrouped shapes (it's all text), each layer has 5 instances of only one symbol (keyframes), no objects are grouped and text is all static text.
When watching the animation, the first word (web) looks fine, on the second word (design) the tween fails on the last couple of frames of that clip (the blur filter disappears), the third word (and) is OK, and on the forth word (development) the blur filter is not applied to the last 16 frames of that clip.I broke each animation into its own MC thinking that was causing the issue, but that didn't fix anything.
Is it possible to have a symbol, copy it, and change the copy without affecting the other?
View 3 RepliesI am trying to use .slice() to copy an Array of Loaders (each with a jpg loaded in it), as follows:
newArray = oldArray.slice();
and it works, but the problem is, any changes I apply to one Array applies to both, as though .slice() had just copied a pointer to the same Array, but I was specifically told that .slice() would not exhibit that pblm. Before I just go back to loading the same images twice, is there something special about Arrays of Loaders or something else I might be missing?
Is there a way (in AS2) to copy a layer into movieclip?
View 2 RepliesI have array with DisplayObjects and I need exactly copy of my current array with same DisplayObjects but each DisplayObject should not have direct and indirect relation with my current array. Do you have any clue about this coping display Object.
View 2 RepliesIs deep copy possible in flex 4.5?
View 1 RepliesI am using IE 7.0. i want to keep flv files from youtube on my computer so I copy them from IE cache. Unfortunately, it seems that for some videos, the files are not available.
View 5 RepliesI have one file with thumb-scroll- xml loaded gallery Everything on the main time line under the _root I need to transfer this gallery to another FLA and make it in movie Clip So here is link to original FLA
What is happening now when I copy everything to new FLA even at the same position it dosent loud thumbs and picture
Is there a way to use a button to emulate the print screen button on the keyboard?I'm trying to "capture" what is showing in the projector...I've found keypress stuff, understand how to do that, just can't find anything on print screen.
View 2 RepliesI am creating a new instance of a class file lets say Person
Code:
var p:Person = new Person();
and then i am customizing it..
[code].....
i got stucked in a problem in actionscript 2.0
there is a 2d array - arr[12][13]
how can we start a loop to copy the value(using for loop) in manner:
a1=arr[0][0]
a2=arr[0][1]
a3=arr[0][2][code].....
I'm trying to work out a better way of doing this animation. I'm working on a project where I need to animate multiple robots picking up parts and dropping them. I've attached a quick demo of the kind of movement I need.At the moment I have a Part MovieClip inside a Robot MovieClip (so it will rotate with the robot) What I can't work out how to do smoothly is, how do I release this Part Movie Clip so I can transfer it to another robot & rotate it following the second robot.I can't seem to copy/paste the Part's last position from the 1st Robot's animation to the 2nd Robot without it changing scale/position. Leaving me to basically position a new copy of the Part MovieClip until it sort of lines up with the old parts and switching between the two in the timeline.
View 1 RepliesI copy movie to another file but the same movie doesnt work at other file.copy seems to be copied but it doesnt work.
View 2 RepliesIs there any way I can put a paragraph that people can copy and paste?
View 4 RepliesI have Flash CS3 Professional, 9.0.Iopy-pasted the below code in and I got this compilation error:Quote:1037: Packages cannot be nested.
Code:
package{
import fl.controls.Button;
[code].....