I am working with the scrub element in my custom video player. The code for this in AS2 is as follows (this is the whole of it). How the scrub portion is coded in AS3?
HTML Code:
var nc:NetConnecttion = new NetConnection();
nc.connect(null);
var ns:NetStream = new NetStream(nc);
theVideo.attachVideo(ns);
ns.play("vegas.flv");
[Code] .....
I have created a video player in AS3 using some of the code from Lee's tutorials to create the loadBar and Srcubber. My video works, the play, pause and rewind buttons work. However, I cannot get the loadBar and scrubber to work.
[Code]....
I've been following the tutorials for building a custom flv player and have come across a few problems, the player can be seen online here: [URL]. I'm having a few issues with the scrubber and the load bar, they loadbar starts in the middle and stretches out towards the sides and the scrubber starts in the middle and runs off the end? I'm pretty new to actionscript as have only really used flash for simple animations before, i have attached the source file and the actions are listed below.
var nc:NetConnection = new NetConnection();
nc.connect(null);
var ns:NetStream = new NetStream(nc);
theVideo.attachVideo(ns);[Code] .....
I'm working on building a custom FLV player and I'm having issues with my scrubber. When I drag and drop it, the spot in which it falls and plays is inconsistent. Example, if I drop it in one spot, the video will pick a spot a second or two past. Then when you mouse over the scrubber it wiggles when your on an edge. [URL]
My scrubber code is:
ActionScript Code:
//---Handle Code---//
scrubbar.mcHandle.onPress = function() {
this.startDrag(true, 0, this._y, 455, this._y);
delete this.onEnterFrame;
trace(this);
[Code] .....
I have created an XML driven Video Player based on Lee Brimelow's Video TutorialI have a MC called loader which contains two MCs- a circular shaped clip called scrub which can be used to seek to particular time of the video. and anoder MC called loadbar which denotes the amount of video loaded by expanding correspondingly.Everything works fine except the video scrubber (the playhead). when the scrubber reaches the end of the movie; instead of stopping at the end of the loader MC it goes beyond it.here's the code:
Code:
function videoStatus() {
amountLoaded = ns.bytesLoaded/ns.bytesTotal;
[code]....
I'm building a flv_video AS3 player. I'm using steaming-video.The player is working fine, but there is something that I want to improve. Currently when I push play button and if I drag&drop the scrubber of progress-bar somewhere in the area that is still not buffered, the player doesn't start to play from that position. So I want to do it.
View 2 RepliesI'm trying to get a video (flv) or an swf video player to work on Facebook walls, however no matter what I do - facebook posts the raw fbml and ignores the code.
<fb:swf
swfsrc='http://www.domain.com/flv_player/Main.swf'
imgsrc='http://www.domain.com/large1.jpg'
[Code]......
I followed exactly like the video tutorial[URL]... and so far everything is working fine except that my loader bar starts from the middle and progressively fill up the left and right area.I can't seem to get the loadbar to start from left to right.
View 7 RepliesI'm tweaking the video code found here [URL] His progress bar starts at the edge of the stage. My progress bar starts at x=40 into the stage. My problem is that even though all my mcs related to the progress bar are positioned properly the scrubber mc hops to the edge of the screen when the video starts. It also acts as if the progress bar you scrub though is at the edge of the screen too. I can't figure out why it's doing this. There's nothing in the code to tell it to do as such.
[Code]...
i did the Video Basic Tutorials and the XML Playlist, because this was a chance to insert more than one videos. Altouhgh, i customized the skin of the Videoplayer.
When i'm finished, the videoplayer shoud look like this:
Okay, so i took the functions shown in the tutorial. So i've got an XML-Playlist, play/pause button, replay button, mute button.
But as you see in the screenshot there should be some more
First of all i want to stop the "Autoplay-system" and "Autoreplay-System". I want to show the preview-picture and if i klick on "play" i want the TV to start. If one video is finished, there should be the "screenshot" again.
Screenshots -> Because i want to use the player with a lot of movies, i want to write down screenshots next to the videourl (XML Datei), something like this
Code: Select all<?xml version="1.0" encoding="ISO-8859-1"?>
<videos>
<video url="videos/rundengewinner08.flv" desc="Giga Homepage Award Runde 8" thumb="preview.jpg" />
</videos>
Than there are some "Arrowkeys" like this », so i want to switch between the screenshots to choose your video. Because i want this as "navigation", i don't need the Playlist next to the player (if i delete the layer i cannot use the player anymore).
Third: I would love the "minutes"-display (shown on the screenshot).
I'm making a working scrubber on a video, but having problems. The scrub itself it starting out in the middle of the loadbar. I've looked everywhere, trying to find out what is wrong with it.
[Code]...
All I want to ask is that, can I use netStream and its functions for like resume(); or play(); to control playback of swf files. more importantly, can i use netStream for swf files?
View 9 Repliesfor a project I need to develop a custom video player that needs to be able to go fullscreen, with custom control (play btn etc) overlay. The player will be used in a flash application (say as a window in the application.
Now I can figure out how to build a player from NetConnection, NetStream, Video etc, but I have no idea how you would implement the ability to go fullscreen and have the control overlay when in fullscreen as well.
Note that I cant tell the SWF to go full screen, it needs to be just the player.
Does anybody know why flash gives me this errors when I play video in fullscren mode in custom flv player?
[Code]...
i want to know how to make a good clean video player in flash pro 7.2.
1. show my a website telling me to do that.
2. give me a understandable tutorial
3. send me a file showing how its done.
I am trying to make a scrubber for a mp3 player. I can not figure it out! Any one know of a good tutorial or code I can look at? Everything else is working, just can not get the scrubber.....
View 0 RepliesDoes anyone know how to embed a custom video player into the Google Plus' Stream?You can share videos by uploading, via YouTube, or from your phone, but you can also embed the Vimeo player into the stream, for instance, by just dropping the Vimeo video's URL into the Stream.I assume Google is parsing the markup of the URL for specific meta so that it can render it as a video, much like you can do with Facebook's Open Graph:
View 1 RepliesHow can i create a custom video player with out using the default FLVplayer
View 1 RepliesI'm using the following rather than the FLVPlayback component, how do I attach a generic skin?
[Code]....
I'm trying to figure out how to get the name of the current file being played using a flash 8 video player (custom). Here's the code im using :
[Code].....
How does flash know which video is currently being played? Basically I want to set it up so that there is a 'activeVideo' varible that updates based on what video is currently being played.
I have a custom video player that I built with AS3. When people are viewing the videos I want them to be able to jump ahead of their current download position so that they don't have to wait until the video downloads to watch that portion.
View 7 RepliesI am working in a player and when am trying to make it fullscreen the scrubber and volume bar everything become too big in size.
View 1 RepliesI'm new to flash. I'm trying to create a swf of a video with scrubber and at a certain point through the video the web address pops up and is clickable. I have tried embedding the flv within the timeline but it warns me that things could get out of sync.
View 2 RepliesI'm looking for a tutorial on the interwebs to create a scrubber for the length of a movie clip.For example:If a movieclip is 300 frames long, the beginning of the scrubber would be Frame 1 and the end would be Frame 300 with Frames 2-299 in the middle.I'd like the user to be able to scroll through the movie much like a Quicktime VR
View 2 RepliesI will tell you what exactly i need. I need a video scrubber and it should be in a circular shape. I will tell you how it has to work. I want to rotate with a small circle on top of a big circle. lets assume that small circle is called a dragger. Now i need to drag that on top of the circle either in clock wise direction or in anticlock wise. If am dragging in clock wise, the loading video has to seek forward. suppose in case if am dragging in anti clock wise, i need to see the video backward. This is the functionality am going to implement in FLASH CS3/FLASH CS4.
View 1 RepliesI'm making a working scrubber on a video, but having problems. The scrub itself it starting out in the middle of the loadbar. I've looked everywhere, trying to find out what is wrong with it. Here is the code and link to my .fla [URL]
[Code]...
I am playing flv files on a site. The way I am bring them is via the import video from the library (not using flv component). I am loading the videos via using netStream. So far so good. Everything works fine. I want to be able to scrub through the video by clicking and dragging left or right on the video itself. I plan to make the mouse cursor turn into a symbol that has a left and right arrow when you roll over the video hence letting you know that you can click and drag left or right to forward or rewind through the video. IS this possible? If so, how can I accomplish this?
View 5 RepliesI've got nearly all of it working but the drag action of the scrubber. Seeks on MouseDown but doesn't drag. Oddly I've got this very functionality working for the audio volume scrub bar but not the playhead.
Here is the troubled portion of the code. Happy to send a src file:
Code:
// ScrubHandle Dragging Variables
var ratio_play:Number;
var playTrackBounds:Rectangle = controls.trackbar.getBounds(controls);
var playXpos:Number = playTrackBounds.x;
[Code].....
For some reason my scrubber won't scrub correctly while the video is loading, but once it has completed it scrubs just fine. [code]...
View 11 RepliesI will tell you what exactly i need. I need a video scrubber and it should be in a circular shape. I will tell you how it has to work. I want to rotate with a small circle on top of a big circle. lets assume that small circle is called a dragger. Now i need to drag that on top of the circle either in clock wise direction or in anticlock wise. If am dragging in clock wise, the loading video has to seek forward. suppose in case if am dragging in anti clock wise, i need to see the video backward. This is the functionality am going to implement in FLASH CS3/FLASH CS4.
View 3 Replies
