I'm writing an audio recorder in AS3.In AS2, when I loaded up the swf object, the "Camera and Microphone Access" window would pop up immediately. ("Requesting access to your camera and microphone .. allow").However, in AS3, it still works, but there is a noticeable 2-3 second delay before that window pops up.
View 2 RepliesI want to create a function based (not frame) delay of about 10 seconds to the function at the start of a flash movie, the code only needs to run once.I'm very new to actionscript and have been given links to SetInterval and SetTimer examples but they all seem to be very complex.The function is below. I believe it's possible to add the commandTimer(delay:Number, repeatCount:int = 0) how me to a simple example.
onClipEvent (enterFrame) {
framePos = int(_xmouse / 100 * _parent._totalframes);
if (framePos < 0) {
[code].......
I'm trying to send some variables to a php script, and I don't know how to figure out if I'm successful or not. Here's the AS 3 code I have now (the code snippet assumes that myArray was defined earlier)[code]...
View 6 RepliesCan I trace whether the loadMovie() ... loads the specific content or not?
View 2 RepliesI'm trying to parse this XML but without success? How to parse that xml file?
Code:
<site><point type="arr1">
<title>Universal</title>
<desc>Test2</desc>
<title>Omega</title>
<desc>Test2...</desc>
[Code] .....
I have that loop:
[AS]
for (i=1; i<this.nb; i++) {_root.bande.duplicateMovieClip("bande"+i, i, {_x:originex, _y:(originey+(bandeheight*i))});
[code]....
I've had great success with loadMovie and loadMovieNum, but occasionally I see something in the posts about attachMovie. Is there a difference between attach and load, or is one left over from a previous verion of Flash?
View 2 RepliesI've tried to implement the Introduction to ZendAMF without success
I'm getting this error on publishing the flash file:
Code: Select allError opening URL 'http://localhost/folder/'
Error #2044: Unhandled NetStatusEvent:. level=error, code=NetConnection.Call.Failed
- I'm in localhost on Windows with Xampp.
- If I open in the browser the url of nc.connect() it returns "Zend Amf Endpoint".
- If I print the return of the Tutorials.getTutorials() from another script the returned array contains the correct data.
I've been working with LoadVars a lot recently and like it very much so. However, I have encountered a new problem. I have this array that already works in my Flash project:
[Code]....
just wondering if there is a way to reset the LoadVars() success variable to false or undefined. i need to do this b/c i'm repeatedly fetching data from a asp file using the same LoadVars() Obj to store the data sent from the asp page.
View 6 RepliesThere has been many threads on horizontal parallax effect but I'm trying to build a vertical one with minimal success. I need the effect at a very subtle scale and with easing if possible.
My Current Code (got it from a user here):
// an array with 3 movieClips on stage ... named respectivly
// make sure all these movies go beyond your stage
[Code].....
This is my script in trying to send data to the server side PHP [code]How do I write a SUCCESS and FAILED confirmation using gotoAndPlay to interact with the PHP?}}
View 6 RepliesI found similar issues in previous posts, but not this one. I publish a Flash CS3 .swf file,creating the html page and the javascript file too. If I click the html page locally, the sendAndLoad POST will succeed. If I upload the 3 files to the server, the sendAndLoad will fail. If I delete "AndLoad," the Send function will succeed. Url is fully qualified. I think I made a change in a configuration in Flash, because previous packages of this same file worked.
View 3 RepliesI'm trying to consume Google Finance API on a Flex Project but with no success. I want to use the ClienLogin mode, am able to get the auth token, but then I can't seem to get information from any of the feeds!
I've tried some of the few examples I found by Googling but still can't get it to work...
I've followed the contact form tutorial and believe I've updated the php to php5. The email sends but I never get a success or failed page. It just stays there. I'm being hosted by Go Daddy and I am on a Linux server.
[Code]...
I've followed the contact form tutorial and believe I've updated the php to php5. The email sends but I never get a success or failed page. It just stays there. I'm being hosted by Go Daddy and I am on a Linux server.
php (removed actual email):
Code: Select all<?PHP
$to = "name@email.com";
$subject = "Flash Contact Form Submission";
$message = "Name: " . $_POST['theName'];
[code]....
find a script that allows for bookmarking but everything is outdated, plus the many incompatibilities across all the browsers.use a bookmark script in 2010 that has had success with majority of browsers?
View 2 RepliesHow to show success message in frontend....when a record is inserted in backend.
View 2 RepliesThis issue is being tracked on the facebook-actionscript-api site here:url...What steps will reproduce the problem? Call FacebookMobile.login( APP_ ID, cbLogin) on an Android tablet.Enter Facebook account credentials and press "Login".What is the expected output? What do you see instead?The login window closes and returns to the screen that launched the login window. The callback function 'cbLogin' is called.The screen goes completely white, and has 'Success' in small black text in the >top left corner of the screen. The callback function 'cbLogin' is never called.What version of the product are you using? On what operating system?
-Android v3.2
-facebook-actionscript-ap v1.7
-ASUS Eee Pad Transformer TF101
I've tested this on 2 Android phones, the HTC Incredible (Android v2.2) and the HTC Thunderbolt (Android v2.2.1), and it works fine on both.
How do I provide a success message (perhaps with a dynamic text field) when the three objects have been dragged to their targets?
package
{
import flash.display.Sprite;
import flash.events.MouseEvent;
[code].....
Using flex 3, how do i set a timeout for a NetConnection?
code sample:
nc=new NetConnection();
nc.addEventListener (NetStatusEvent.NET_STATUS,checkConnect);
rtmpNow="rtmpe://host/test/test1";
nc.connect(rtmpNow,fuid,gameName);
I want to serialize an object to AMF, and I want the result to be exactly the same as if it is serialized by NetConnection.call(). So, I use ByteArray.writeObject(), and the output bytes are usually the same as bytes sent by NetConnection.call(), but sometimes couple of bytes are different.
I found this in AMF3 spec: "Note that ByteArray.writeObject uses one version of AMF to encode the entire object. Unlike NetConnection, ByteArray does not start out in AMF 0 and switch to AMF 3 (with the objectEncoding property set to AMF 3)." It explains that differences.
This code is on the opening frame of one of my Flash files:
Code:
var myConnection:NetConnection = new NetConnection();
myConnection.connect("rtmp://fvss.playstream.com/fvssod/myclient");
var myStream:NetStream = new NetStream(myConnection);
myVideo.attachVideo(myStream);
myStream.play("iLoveLALong");
It starts this song "iLoveLALong" as background music. Works great. But now I need to turn the music off when I jump to another frame in the Flash doc. Can anyone suggest code that will do that, either with frame code or button code?
I should probably be refrencing a book rather than continueing to ask questions here but there are no books for AS 3.0 and flash media server. So this forum is my book i suppose any way here is what i have...I have 2 .as files one holding code for a netConnection and one for creating the netStream my problem is i need to pass the netConnection refrence from the netConnection.as file to the netstream....here is my failed attempt to do so I also get the following error message..ArgumentError: Error #2126: NetConnection object must be connected.
[Code]...
Is it possible to do a fileref.upload through a NetConnection, so I can call a class inside my php instead of a direct URL to my php file? now I have it like this fileRef.upload(new URLRequest("upload.php")); but I want to get it into a call function..
[Code]...
Is it possible to use the flash.net.NetConnection object to connect to my Flash remoting enabled web application over HTTPS within Tomcat or any other servlet container?
I am using the SpiceFactory cinnamon project for amf remoting and have searched for examples of using HTTPS but see only the reference to a proxy type in the NetConnection object.
If someone could provide a reference or example that would be awesome. Or if it is not possible using the flash.net.NetConnection object are there any recommendations of how to configure HTTPS for the spicefactory cinnamon library.
I have to replace the mx:VideoDisplay component in an existing Flex project with a custom made component. To achieve this, I have to conform to its current Interface, so my component receives the video urls (via source parameter) in the form of either:
/data/myflvfile.flv (if the file is played locally)
rtmp://streamcloud.myserver.com/cfx/st/somedirectory/myflvfile.flv (if the file is streamed from Cloudfront)
My new component is based on NetConnection and NetStream. With any of the entries above I have to split the input in two strings: one for the NetConnection.connect(NetConnectionStr) method and the other for the NetStream.play(NetStreamStr) method. For instance:
Given /data/myflvfile.flv then:
NetConnectionStr = null
NetStreamStr = "/data/myflvfile"
[Code] .....
Building the two strings is very obvious for the "local files" case, but it gets tricky in the others. The problem is that I have no smart way to guess what part of the input is the server URL and what part is the stream name + directory structure. In some examples found on the Internet, people are simply guessing that the last part of the source (what is after the last "/" found) is the NetStream name. In my case, this is not always true because the streams may be in subdirectories on the server. It is even worse because server names may contain "/" characters!
Strategies to solve it:
Connecting to server, retrieving its real URL, finding stream name
As NetConnection seems to be "smart" enough, my first attempt was to invoke connect method with the full source url. Unfortunately, I found no way to get the real server address out of a NetConnection object (connection.uri returns back the exact input). So this seems to be a dead end. Connecting to server, iteratively retrieving streams. Another strategy could be to connect to the server and then try iteratively (starting from the very end) to play streams until it works:
Try 1: stream.play(myflvfile) FAIL
Try 2: stream.play(subdirectory/myflvfile) FAIL
Try 3: stream.play(somedirectory/subdirectory/myflvfile) SUCCESS
How to do it in the original VideoDisplay component (if it is based on NetConnection/NetStream objects?)?
[URL]
I followed the above example in AS2,but only get the error:
Call to a possibly undefined method getNetConnection through a reference with static type fl.video:INCManager.Here's my code: this.addEventListener(Event.ENTER_FRAME,
[Code].....
I need a solution for this: when the port 1935 is closed, the NetConnection switch rtmpt (port 80). The NetConnection class built in function: proxyType="HTTP" not works or I use not rightly.In the FLVPlayback class works this function, but I don't know how..
View 7 Repliesi m new for FMS I just wanna make a connection, I put swf file in FMS folder and here my codepackage{ import flash.net.NetConnection; import flash.display.Sprite; importflash.text.TextField; import flash.events.NetStatusEvent;public class main extends Sprite private var
View 3 Replies