I am working on an interactive map. When you roll over a dot on the map a slide moves into view. I've got this working great but when I add script for the roll out the whole movie just repeats over and over and the button doesn't work at all. I've pasted my code below.
View 3 RepliesI wanna make a gallery using xml. Every photo is gray, after ROLL_OVER on it position loads it's colored copy, and after ROLL_OUT copy dissapears. After click, it should navigate to URL. And I have 2 problems:
1. ROLL_OUT doesn't work correctly: it's strange, but it work after ROLL_OVER ... :<
2. how to make linking, hm.. for example, if it's first thumb, to "proj/1", if second to 'proj/2' etc...
it's my code:
[Code]...
I've just started to look at PV3D working through the tutorials here. I'm trying to make up a menu system, just using primitive planes for the buttons and using a movieclip in the library for the texture, so far so good but I'm now getting a weird effect with the roll over/out. clicky here
If you just roll over the buttons randomly the roll over and out works fine but if you roll over one then roll out - but not over another button - then the roll over state remains. Checking the traces though the button does receive the roll out call but then immediately receives a roll over call putting it back in to a highlighted state.
Maybe it is a silly question but I have problems when I put a button inside a movie in Flash 5. It doesn't work and I don't know why...
View 3 RepliesI have a button instanced "howto_weblink_btn" which is located inside a MC instanced "HowTo_maininfo_mc". I would like to write a code allowing me to access this button from the main navigation menu. Here is what I come up with:
HowTo_maininfo_mc.howto_weblink_btn.addEventListener(MouseEvent.CLICK, onClick_openJTV);
function onClick_openJTV(event:MouseEvent) :void {
HowTo_maininfo_mc.navigateToURL(new URLRequest("http://www.ubloom.com/index.php?
[code]......
what happened in my flash document was, I created a button, "next_btn" with the following commands:
on(release){
//to remove all the splats
for (score=0;score<100;score++){[code]...
At this point, almost everything worked perfectly. Everything, but one thing. Apparently, the swapDepths command wasn't working. It was then that I thought maybe swapDepths only works on movie clips.And so I converted the button into a movie clip. I modified the instance names, etc, and almost everything worked. Everything, including swapDepths, but one thing: the gotoAndStop command.For some reason, when I tested the movie clip (containing a button) out, it removed the splat+score and finger_mc movie clips, as well as stoped the background music from playing. However, it did not go to the next scene and frame as specified by the gotoAndStop command. "s1a2" is the next scene, and "gameplays1a2" is its frame.
First of all, I would like to apologise for not knowing whether this code belongs to F5 or FMX Action Script. I'm that noobish, yup. Anyway, what happened in my flash document was, I created a button, "next_btn" with the following commands:
[Code]...
At this point, almost everything worked perfectly. Everything, but one thing. Apparently, the swapDepths command wasn't working. It was then that I thought maybe swapDepths only works on movie clips. And so I converted the button into a movie clip. I modified the instance names, etc, and almost everything worked. Everything, including swapDepths, but one thing: the gotoAndStop command.
For some reason, when I tested the movie clip (containing a button) out, it removed the splat+score and finger_mc movie clips, as well as stoped the background music from playing. However, it did not go to the next scene and frame as specified by the gotoAndStop command. "s1a2" is the next scene, and "gameplays1a2" is its frame.
I want to create a button that toggles but has a roll over, roll out and click animation. Anyone willing to point me in the direction I need to be so that I can achieve this. I can create the roll over and roll out animation for the buttons but then how could I toggle between the two buttons. Ultimately this is for a start and stop situation. I want when I roll over the button for it to have a transition then click and it toggles to the alternate button with animation. I have been tackling this now for a week and with no success. So far I have found ways to toggle but loose the animation or vice verse.
View 4 RepliesOKay I have a button, "home_btn". I also have a movie clip, "movie1_mc."
What I want to do is when I roll over "home_btn," I want it to play "movie1_mc."
What is the action script code to make a roll over on a button play a movie.
*The movie is going to be a sub navigation list containing other buttons, which will fade in when you roll over the main button.
-The problems i'm having with my code is: 1. when the movie loads, the clip is playing initially when it should be stopped until the mouse rolls over it. Once the mouse rolls over it once, it works perfectly from that point on2. when I put a stop code in, the movieclip isnt looping initially(which is what I want), but now when you roll over the button, the clip will play once and not continue looping(I need the rollover function as kind of a "pause" buttonHere's my code:
mcCircle.addEventListener(MouseEvent.MOUSE_OVER, mcCircle_onMouseOver);
function mcCircle_onMouseOver(e:MouseEvent):void{
play();
[code]......
I just want to design a button when the mouse roll over the button will gradually become larger (to a fixed size) and gradually comes to the originally size when roll out. I try to use "Adding Buttons to Movie Clips" method, ie, one MC with two layers, an amimation MC (tween from small to big and then big to small) and a button. Add script as follows:
on the first frame:
if (Playing eq "True") {
play ();
} else {[code]....
When I roll over the MC tween small to big and big to small and when roll out the MC gradually small. What I want is when I roll over the MC tween small to big and keep it is except when I roll out.
I'm trying to make the switch from AS2 to AS3 (with some difficulty I should add). I used to make a movie clip, create a roll over animation and apply this code to it"
onClipEvent (enterFrame) {
if (this.hitTest(_root._xmouse, _root._ymouse)) {
this.nextFrame();
[Code]....
How would i acheive this code with AS3, I haven't been able to find anything on the forums or googling that has actually worked.
im trying to create a button that roles over with the user places the cursor on it the actual object "PhotoshopOver" is in the movieclip "Gallery:
[Code]...
Greetings. I've been doing this tutorial. [URL] And worked pretty well. In order to adapt to my needs i made it a movie with a drag and drop parameter to be loaded in another movie (with loadMovie or loadMovieNum). The problem is than the movie loads, drags but doesnt drops. Even i tried with the example movie and nothing happens.
View 1 Replieson (rollOver) { gotoAndPlay(2);}on (releaseOutside, rollOut) { gotoAndPlay(11);}
i am using this this scrip in flash 8 scrip 2
and i want to use in flashcs5 script3
I have a graphic that when rolled over it starts a movie clip, when rolled out or off I would like the clip to instead of stop actually roll the movie back whether the clip is at the end or not. Like an animated button I would guess.
View 1 RepliesI've got this weird problem with one of my Flash projects.At first it was working fine.And then i decided to externalize the actionscript.On the root, there is a movieclip, wich holds a button.When another button is hit, the movieclip appears (goes to frame 2) and displays the other button (only on frame 2).It worked fine, but since i moved the code frome the swf to an AS-file the button in the movieclip doesn't respond at all.For clearer explaining i made a very basic flash-file.Main button (on root): main_btnMain movieclip (on root): test_mc Button in movieclip: test_btn.[code]
View 2 RepliesI have a button on which an effect will play (_root.loc.gotoAndPlay part) but i only want this to happen once (the first time you roll or dragover the button)So i thought i'd do this by making a variable on the root (the lettlook variable, which by default is "no") and then on the rollover, dragover first play the loc movieclip and then set the variable to "yes" (so it'll never trigger again after the first time)so this is the script i made
Code:
on (rollOver, dragOver) {
if (_root.lettlook == "no") {
_root.loc.gotoAndPlay(2);
[code]....
Problem is, of course, that it doesn't work. It doesn't play the loc movieclip and it doesn't change the lettlook variable to yes.
I am a student trying to learn how to take multimedia elements from one class and put them on a webpage using Dreamweaver CS4. From an online tutorial, I created start/stop buttons with ActionScript3 URLRequest to reference a sound file. The swf works fine when played; it plays from the html generated by flash but when I use Dreamweaver CS4 > insert > media > swf and then preview page in browser (firefox), the button doesn't do anything. When I compare the html page generated by flash to the html created by Dreamweaver, they look completely different. I don't have a clue what to do next.
[Code]...
I've read many of post on how to make a button with as3, and I finally got one button to work, however; if I add another button one of my movie clip symbols disappears and neither of my buttons work! Each button is a button symbol, on it's own layer, with own instance name, each action is on it's own layer referring to the unique instance names with their own function names. My code is below.
button_1.addEventListener(MouseEvent.CLICK, myButtonFunction);
function myButtonFunction(event: MouseEvent) {
var request:URLRequest = new URLRequest("index.html");
[code]....
I'm not quite sure if my actionscript is affecting it. How can i code it in such a way tat my button would trigger the gotoAndPlay()?
[URL]
i made a movieclip button and everything works fine except that when i press the button it's supposed to send me to the next scene, but it doesn't, nothing happens. here's the script i did in the frame 1 of the scene:
stop();
this.botonix.onRollOver = function() {
botonix.gotoAndPlay("over");
[Code]....
Can I send someone my .fla for my feedback form - I'm 99.9% there - I just need for someone to explain why my submit button is not working - I'm really clueless when it comes to actionscript and I do apologize for that:-) - when I hit submit I want people to be able to submit their info from all over the world and I receive it on my end.
View 3 RepliesI have a slide-show with 3 sections. The slide-show loops automatically as well as when being prompted by a button to go to a particular section. I also added a play/pause button which works initially, however, when clicked on one of the buttons to go to another section, the slide-show resumes looping..I"m assuming I need to check weather the pause button has been clicked to resume/or not resume the slide-show... but I'm unable to figure out how to do that.Here's the code:
import fl.transitions.Tween;
import fl.transitions.TweenEvent;
import fl.transitions.easing.*;
[code].....
I have a Rectangle Box called (Panel1_mc).And inside it there is a button called (BoardMessage1_btn). When I click on this button, the Rectange Panel should move upwards. Right now it is on the bottom of the page. The following code throws an 1010 error:
Panel1_mc.BoardMessage1_btn.addEventListener(Mouse Event.CLICK, clickSection);
function clickSection(evtObj:MouseEvent){
var Panel1Tween:TweenMax = new TweenMax(Panel1_mc, 6, {y:450, delay:1, ease:Strong.easeOut});
}
What is wrong with this code?
I have created a submit button in Flash 5.0 and embedded it in my ASP form.
This is the script for it....
on (release) {
getURL ("verify.asp", "_self", "POST");
}
Why isn't it bringing up my verify.asp page but only the error.html page?
3 frames
on the 1st i have some XML code
in the 2nd i read the XML and send to the 3rd frame and play a FLV movie. when the FLV movie ends, if goes back to the 2nd frame to "know" what is the next movie and goes again to the 3rd frame.
When i export everything is OK, when i publish and use the Mac Projector it is ok. But if i use the Fullscreen Mode, when the movie end's the Movie doesnt go back to the 2nd frame...
I create a button in flash cs4 and click "publish preview -flash" and my button works. I save my file and click "publish preview - flash" again, my button doesn't work anymore.??I'm using Flash CS4 on an IBM compatible.
View 17 RepliesI have a slideshow with 3 sections. The slideshow loops automatically as well as when being prompted by a button to go to a particular section. I also added a play/pause button which works initially, however, when clicked on one of the buttons to go to another section, the slideshow resumes looping..I"m assuming I need to check weather the pause button has been clicked to resume/or not resume the slideshow... but I'm unable to figure out how to do that.head of time! Here's the code:
import fl.transitions.Tween;import fl.transitions.TweenEvent;import fl.transitions.easing.*;
//Timervar tl:MovieClip = this;var slideDuration:uint = 12000;// or use whatevervar slideTimer:Timer=new
[code]........
I have a splash page with a logo. When the logo (splash_btn) is clicked I want it goto the site (frame label: home). All my code seems to be right but the button doesnt work.
[Code]...