ActionScript 3.0 :: Scaling The Display On The Web?
Sep 21, 2009
I have created an SWF with a 1000 x 700 pixel stage. My questions is this; what code can I use (or publish settings can I set in CS4) so that the SWF scales up or down and always fills the browser window? In other words, if I'm running my browser in full screen mode with a 1680 x 1050 widescreen display, I want the SWF to scale up to fit that monitor.Likewise, if I'm running an 800 x 600 display, I'd like it to scale down to fit that monitor as well. What I DO NOT want is for the SWF to open in a child window (as it does when I test the movie).
I am building an application that is to run at 2 difference stage sizes. 960x640 and 1024x768 (for those paying attention, you may note that those are the high res settings for the iPhone and iPad2)The app was designed and build to run on a stage of 960x640 and when running at this size, there are no problems.When the app loads in the 1024x768 window, it "strechs" the stage to fill the window, but keeps the aspect ratio. Everything looks good and the application runs without any problems expect for one thing.Sometimes, display objects on the stage "jitter" when moving or animating. I have discovered that this is because the stage is "scaling" the x and y values, and is not pixel snapping the objects on the screen, even though the x and y values of the display object are indeed whole numbers.A prime example of this is I have 2 bitmapData images. bmData_s and bmData_h. bmData_s is 192x388 in size.bmData_h is created from a copy of bmData_s with a glow filter stroke on it, resulting in a image that is 198x394 (6 pixels bigger due to a 3 pixel stroke)I place it on the screen using the following code:[code]
Now, when the app runs on the iPhone which is a 960x640 screen size, or on the PC which is using a window of similiar size, the image doesn't appear to move at all the "stroke" appears and disappears exactly as it is suppose to However, when I run it in a window that is 1024x768, the _h image appears to "jump" one pixel up.I have encountered many other similiar things that only occure when the stage is scaled. There is a spot in the app where I am animating a bitmap by manipulating it's scrollrect x and width (have it's do a wipe in from right to left like a peice of paper unrolling on a table) and due to the scaling, the right edge of the image jumps left and right 1 pixel but on 960x640 screens, it looks perfect.Does anyone know how I can compensate for this effect so that this jumping doesn't occur when the stage is stretched to fit the window it's running in?
I'm building some navigation that extends all the way from left to right across my SWF. When the window resizes, I'd like the nav buttons to get wider but not have the text on the buttons get wider.
The buttons themselves are rectangles with a vertical gradient and a stroke around the outside. I'm using 9-slice scaling so the stroke doesn't scale, but the middle (gradient) gets wider or narrower.What'd be great is to be able to select an object or layer and say "don't scale, even if the rest of this movie clip scales". Is there a way to do that, or will I have to do it via actionscript?
i have a diagonal movieclip that I am trying to scale along with the background video. The background video scales perfect, I am attaching the diagonal movieclip (br in the code as bottomright) with addChild Instead of scaling with the window, it seems to repeat such as the image is displaying. this is the main section of the code that is doing the scaling
var br:mc_bottomright = new mc_bottomright(); addChild(br); //proportional scale if ((stage.stageWidth / stage.stageHeight)> (owidth/oheight))
I am trying to achieve an effect of scaling a movie clip on click...very similar to [URL] When the user clicks on See, Hear, Play and Shop boxes, the boxes expand. I have created a box movieclip that has a bar on top. This bar is a movie clip inside the box movieclip. When i try to scale the main box movieclip, the internal bar movie clip scales as well. How to stop this?
really sorry to bring this one up again. I've managed to create quite good working gallery. What I'm trying to now is create a menu that is attached to the scaling part but does not scale it self - in other words just changes position. here's an example of what I mean: galleru #1
What I'm trying to now is create a menu that is attached to the scaling part but does not scale it self - in other words just changes position. here's an example of what I mean: galleru #1
When using Loader class to load display objects (bitmaps, SWFs...) from remote URLs, is there any way for them to be instantiated (referenced as we know, by Loader::content property) as some user specified valid subclass? For example if I had a class that extended a Bitmap, is there any way for the loaded object to be of this class?
I am a complete rookie in ActionScript2.0/Flash.I just started learning regarding a project. My problem is I want to display data from MySQL in a DropDown Menu in Flash. the SendAndRecieve functionality only aids us to receive any responses,right?(Please correct me If I am Wrong.
Is there any way to display flash objects which are outside the display area when flash is embeded in HTML The reason i ask is my current project has a rotating + enlarging effect which is largely dynamic so sometimes an object may clip the edge of the stage areathis looks messy but i dont want to increase the stage area to cover the largest possible area any object could enter because most of the time the objects are at the center and small so i would end up with a lot of white space
I have a list containing display objects from throughout the application (insertion order). I want to process the list either top-down (parent, child) or bottom up (child, parent). The only requirement is that either a parent is processed before any child or vice versa a child before its parent. What is a good approach? This question is not about sorting a list. It's about retrieving the depth of a particular display object.
Example Display list: A (root) B1 C1 C2 D1 B2 ......
My list: list = [E1, F4, A, B2, B1, C3, ..., N9, N8]
Bottom-up: N9, N8, F4, E1, C3, B2, B1, A
Top-down: A, B2, B1, C3, E1, F4, N9, N8 Does not matter if N9 before N8 or N8 before N9. Important is that any N is before M (first run) or any M before its children N* (second run).
How do I identify all the display objects in the display list in ActionScript, bellow the one that I have clicked? All the other objects are shadowed by the first one. What if other objects have visible parameter as hidden?
Can you make one Bitmap Object (I'm using an external jpg) or something similar, and then display it many times simultaneously without creating a separate object each time?
Also, would they be easily removed or hidden?
I've got a little checkmark jpg graphic loaded here, but I'm not sure how to go about using it in many places at once.. I can only display it in the one place at any one time...
I'm thinking there might be a way to load the picture once, then use its bitmapData elsewhere in new display objects somehow, without needing to reload the image over and over?
I have to make time so the hours to be starting with 0 for the numbers less then 10 for example 9:30 to be 09:30 and in my code it works for the minutes but not for the hours. I have written the following code here:
function UpdateClock () { myDate = new Date () hours = Number(myDate.getHours()) minutes = Number(myDate.getMinutes()) seconds = Number(myDate.getSeconds()) [Code] .....
It's my understanding that a display object cannot be in the display list more that once.So if I add something to the stage shouldn't a second addition of the same object replace the first? for instance:
[code]...
there should now only be one "myDisplayObject" on the stage.
I want to know what is going on with my flash document where more of the document is showing than the document size. despite the little white box showing the size, if i set scaling to 100% it starts reaching past the boundaries. how can I get my flash doc to scale without viewing what is essentially outside of the frame?I am experimenting with getting my flash website to scale. I have tried a few things like SCALE="default" in the html and such. I want to try and keep the aspect and scale, but have a minimum size. For this I have been trying swffit.
I am making a site using a liquid layout in Flash and have added an FLV with playback component swf. When I test the file it scales fine in the browser until you try rescale/minimise/enlarge etc. It then squashes.Url...Try rescaling the browser and you'll see the issue occuring. This only happens with the FLV playback component added. It is a linked file by the by and not embedded.
I needed to convert a simple graphic symbol into a movie because I wanted to give it depth using the (gradient bevel) filter effect. The movie has to appear at different sizes in my animation but the filter effect does not scale with the symbol. Is there a way to make this filter effect (gradient bevel) scale when I scale the symbol it is applied to?
I have a flash file that I am scaling. There are buttons in the file that have tooltips that pop up when you roll over them.Problem is, the tooltips scale with the .swf file so they get huge and are not in the right spot over the button anymore.the tooltips will maintain a size without being scaled?
I have a SWF file, with it's own buttons and events etc. that I am trying to load into a scrollpane in a parent application, and have it be scale-able (i.e. zoom in and out).It doesn't need to animate zoom, click to new scale is ok for now.[code]Everything seems to work except the scale statements at the end, they generate a compiler error:TypeError: Error #1009: Cannot access a property or method of a null object reference.at InspectorShell()
I'm looking to have a logo stay locked in position on the right and the menu bar stay locked in position on the left when scaled in a web browser. The background in the main stage area. Is there a way to do this in Flash or is this done with HTML?
I have developed the entire module with 800x600 Resolution.But Now I got an issue that i need to reduce the content area (Shrink the contents instead of changing the resolution). Because some one had developed the custom player that will affect some of the margins of the content.Is there any AS2 script is avail for scaling the entire stage to 80 % of its original size for the entire module...
