I created a graphic to simulate a volume slider. Its working, but i want a movieclip graphic (vol_switch) to follow the mask. It is only following it after i release the mouse. i cannot figure out how to have it follow on the mouse drag without taking precedence over the mask and disabling that. I tried the code in bold, but not working.
[Code]...
I made a volume slider which works with a draggable mc to control the volume. But I want to do a bit different slider using a mask like the slider in Component box. The aria I want to drag over is a rounded rectangle. I make a rectangle which will be my bound and i use the rounded rectangle to mask it. How should i continue.
View 1 RepliesI've created a small music player with a sliding volume control. I'm having trouble with the volume. Though it does control volume properly, if I set the initial volume to less than 100%, the volume always starts at 100% until I move my mouse over the player. At that point, the volume changes to whatever the initial volume is set to.Is this a flash bug, or am I missing something? Here is the affected code (code for other buttons/functions omitted for brevity):
var song_initvolume:Number = 100;
slider_1._x = groove_1._x + song_initvolume;
playSong(0,song_play);[code]....
I'd like to be able to set the volume at say 50%, but the above mentioned behavior happens each time.
i want to make volume slider for adjust volume ..here i am getting some problem in startDrag and stopDrag method my volume slider Move when mouse cursor on stage (outside of the volume silder),, i assign two listener Mouse_DOWN and Mouse_UP .. for sliding i create One Rectangle (0,0,100,0)
View 3 Replies3 circles which can be dragged over a target (one for each circle)When the circle is placed on its target it loads its respective xml playlist into 4 buttons (play, pause, forward, back)I want to be able to create some kind of function to control the volume, either using a slider or a rotary dial, whichever is easiest!
View 4 Repliesdoes anyone have an example of a simple volume slider that controls the master volume of the entire swf?
View 1 RepliesI'm building a video player and am kinda stuck at the volume slider part. It's a YouTube style vertical slider, meaning if the slider is in the top position volume should be 100% and if the slider is dragged to the bottom position sound should be 0. Currently it's doing the opposite of what I want :(
Dragging the slider down will make the sound louder, while dragging up lowers it.
Here is my code below dealing with the volume slider.
[Code]....
The (-4) is an offset value so when you drag it all the way to turn it off, it's 0 and not 4. I need to reverse this somehow, so the traces above will swap... going down will make userVolume = 4 and going up will make it 30.
So i have a combo box that a user can go a select different UI's with. In another pane i have a map that the user can press the arrow keys the move up, down, left right etc.
Only problem is that once i have selected a map from the combo box, the combo box stays in focus so that when i press an arrow key, the map moves but it also scrolls through my combo box.
Any way i can disable keyboard input to the combo box or remove the focus on the combo box?
I've tried creating a dummy button on the stage called "dummy" and when the change event happens on the combo box i switch the focus using
Selection.setFocus("dummy");
but then i get a recursion error and it stops my scripts.
I am trying to create a basic timeline, similar to the timeline we all use in flash (see attached).
I have a playhead slider, which when dragged, just drags within its startDrag() limits.
I also have horizontal window scroller which also when dragged, just drags within its startDrag() limits.
I am trying to work out how to get the horizontal window scroller to scroll when the playhead slider hits the left or right edge. I am using hittest for this collision.
I have the playHeadSlider scrolling along the top. When playHeadSlider collides with hittestThing I want mcContents to then move.
It kind of works.. mcContents moves when the playHeadSlider is in collision with the hittestThing.. but it just moves rather than 'drags' across. I have it set up so that mcContents is twice the width (approx) of mcScrollWindow.
I need to somehow update what I have so that if the playHeadSlider collides with hittestThing on the right, mcContents only moves to the right and if playHeadSlider collides with hittestThing2 on the left, mcContents only moves to the left.
I'm a designer that inherited a project with a volume slider. I'm not that good with actionscript yet and haven't been able to figure out the code. The volume and slider starts at 100%, and I need it to start at 50%. Can you tell me how to set both the volume and slider at 50%? I'm sure it is a simple solution but I can't figure it out. I tried a few things but have not been able to get it to work correctly in both the volume level and start position for the sliderHere's the code on the 2nd frame of the mc:
Code:
stop();
var NiVol:Sound = new Sound(_root.Container);
[code].....
I am developing a drag and drop functionality and take a JPEG screen shot of droped objects. my problem is. when i drag and drop an object the object jumps off some distance.. i am unable to clear tat..
[Code]...
Direct me to a volume slider tutorial that works for actionscript 3.0? there are some out there but they are all outdated.
I did one that enables me to mouse over an item and move it all over the screen, but I need to get it to scroll along an axis. thats where Im getting hung up.
I actually have a really cool project. an online studio that enables you to rehearse individual parts of songs that I prerecord.
i'm triying to do a slider bar for control volume but all scripts are for vertical or horizontal movement, but i need do it with a light inclination i have been thinking to give to the limits line a value of x an y for upper possition and other value for x and y for lower position but i don't know to do it.
View 3 RepliesI have a horizontal volume slider working, but I'm not sure how to give it the effect of lighting up as the volume is increasing or decreasing. I'm guessing it's something along the lines of controlling a separate movie clip via AS, but I'm not sure how to do it.
View 8 RepliesI am trying to add a volume slider to my flv player, I currently have just a mute button My code is as below
var nc:NetConnection = new NetConnection();
nc.connect(null);
var ns:NetStream = new NetStream(nc);
theVideo.attachVideo(ns);
[code]....
I need a vertical volume slider, but flash is crazy and instead of increasing volume as you drag it up it decreases it instead because of the origin point. the entire slider device is dragable too, so that is another dillema.
View 4 Repliesi'm triying to do a slider bar for control volume but all scripts are for vertical or horizontal movement, but i need do it with a light inclination i have been thinking to give to the limits line a value of x an y for upper possition and other value for x and y for lower position
View 2 RepliesI have a horizontal volume slider working, but I'm not sure how to give it the effect of lighting up as the volume is increasing or decreasing. I'm guessing it's something along the lines of controlling a separate movie clip via AS, but I'm not sure how to do it.
View 8 RepliesWen i drag mc2 i want mc1 drag in the same time.
View 1 RepliesI'm trying to set up a slider that will adjust the volume of the video that is playing. I currently have a slider that adjusts the progress of the video that works just fine. I set my volume slider up the same way (as far as making it slide and the bounds it's contained within) but it fails to actually be draggable. I click on the slider and it disappears from view instead of allowing me to drag it. It's been a while since I've done any AS work and I'm struggling to figure out the problem here as everything appears to be correct.
View 1 RepliesI am trying to use the slider component (aSlider) to control the volume of mySound which is a class called PlaySound. Created an addEventListener for aSlider with a SlideEvent.CHANGE executing a function called changeVolume. Everything else works but I can't seem to get the slider to control the volume of mySound.
import flash.events.Event;import fl.controls.Slider;import fl.events.SliderEvent;import fl.controls.Label;
var mySound:PlaySound = new PlaySound ;
[Code].....
I made a volumeslider, but the problem is that the sound plays at 100% when the slider is down and at 0% when the slider is up.Of course every volumeslider does the opposite. adjust this code so down, the volume becomes 0% and up 100%?
sliderVolume.onPress = function() {
this.startDrag(false,150,150,150,250);
}
[Code]...
How to control the volume of the microphone with a slider?
View 1 RepliesExplain the code, or point me to a good tutorial for making a volume slider for an FLV player?
View 6 RepliesI've followed the tutorial [URL] What I would need to do to the Action Script (below) in order to have it so the volume (slider) is set to max when loaded. So the music starts loud instead of muted.
this.ratio = 0;
dragger.onPress = function() {
this.startDrag(true, 0, 0, line._width, 0);
this.onEnterFrame = function() {
ratio = Math.round(this._x*100/line._width);
_root.volume = ratio;
};};
dragger.onRelease = dragger.onreleaseOutside=stopDrag;
I'm trying to make a music player with play, pause and stop buttons aswell as a volume slider.However, I'm getting these three errors:
Line 12 1046: Type was not found or was not a compile-time constant: Rectangle.
Line 12 1180: Call to a possibly undefined method Rectangle.
Line 12 1180: Call to a possibly undefined method Rectangle.
Here is my code:
Code:
package {
import flash.events.*;
import flash.display.*;[code].....
_root.createEmptyMovieClip("vsound",_root.getNextHighestDepth())vSound.attachAudio(ns);[code]....
Before i had the volume slider, the mute button was fine. but now, it doesn't work anymore.
I have a flash movie playing some music, but the slider controlling the volume has become unresponsive. I have no idea why. msg me if you want the see the actionscript.
View 1 RepliesI have a volume slider and I want to implement a mute button to mute the sound no matter where the slider is and unmute again when clicked or the slider is moved. I've tried to do it but so far I've managed to mute it and unmute it using the above methods, but whenever I move the slider to another position and go to mute it again, it doesn't work.
View 9 RepliesI've followed the Flash Video Basics Tutoirals 1-8 here on gotoAndLearn and stopped short of making the "Volume Slider" or "Full Screen" buttons. I've been googling all over and not come up with a simple solution to adding these features to my video player. In addition, a counter for the video length would be awesome.
View 6 Replies