ActionScript 3.0 :: Complex Buttons Only Work On 1st Hit?
Dec 14, 2009
I'm writing code for a website (for the first time) using Flash CS4 AS3 and am hoping someone out there can answer a simple question for me. I have multiple buttons on the stage that point to different areas of the timeline. All of the simple buttons work fine.he problem that I'm having is with the complex buttons (that have a movie clip in them) only work one time and then die. They still animate, but don't function after the first use...Why?! I've googled for days and am baffled to my wits end.I'm talking about and be able to point me in some direction. I've tried several different things from different sites, so the code is a little funny right now. The buttons that don't work are 'mybutton, pic1, and entrypic1.' Everything is labeled correctly in the properties manager and the code is below:
stop();
function setupEvents() {
pic1.addEventListener(MouseEvent.MOUSE_DOWN, mouseDownHandler1);
[code]......
View 5 Replies
Similar Posts:
May 24, 2011
I am curious about how battlefield heroes works - it is a game playable in your web browser, and it is quite alot more complex than your average webbrowser game. Does anyone know what technology it is based on? Flash, ActiveX, Applets....? What technology does Age Of Empires Online use?
View 3 Replies
Apr 24, 2011
I would like an animation to play (of the words being scribbled out) and when you mouseout, it goes back to normal. On page click, I wanted the link to change colour so that you would know which page you were on.I have created a frame by frame animation of the words being scribbled out, but I don't know what to do with the animation!How do I insert it into my html? Do I need to use actionscript in flash?
View 2 Replies
Sep 1, 2006
I'm dealing with this line of action-sript (which I'm new to) for a complex rollover:
--------------
//stop();
this.onEnterFrame = function(){
if(rewind == true){
prevFrame();
[code]....
In the last line, I want the function to go to a frame in the timeline, not to an outside URL. Shouldn't I just be able to change it to this? (85 is the frame number)
this.onRelease = function(){
gotoAndPlay(85);
}
It's not working?
View 2 Replies
Feb 4, 2009
I've made a pretty complex button thats actually a drop down menu. So when you mouse over the button, it opens the drop down menu, but the actual button is also clickable. The problem comes in when I copy the button like 4 times. I can make the main button go to different links, but everything inside the button,i.e. the drop down links, changes across all copies whenever I modify one. How do I go about making each button a different separate button so that I can modify each one individually?
View 1 Replies
Jul 19, 2005
I have made a complex button with the help of warhero's tutorial. The onRelease event of this script opens a URL when clicked. What I need is to have the onRelease event of this script load an external movie into a container mc based on Voetsjoeba's Transitions tute.I thought I'd try combining the if/else statement from Voetsjoeba into the complex button script, but this does not work. Can someone tell me how to combine these scripts?
Code:
stop();
this.onEnterFrame = function(){ [code].....
View 12 Replies
Feb 13, 2006
How do you code simple buttons and complex buttons that show they are on or have been activated? I want my interface to be able to tell my users that they are in a specific area by highlighting the button on my menus. (Just like the navigation menu for [URL]).
View 2 Replies
Nov 1, 2004
[URL] i want the white box to close , when another button is click. Its pretty much similar to the TRANSITIONS TUTORIAL. Here it is : [URL]
View 3 Replies
Sep 27, 2009
I need to do a little swf for a webpage that show a map the idea was to create on mouseover a Roll In and with a mouseout a Roll Out.
so i downloaded the template from kirupa, Complex Button RollOver/RollOut Effect
i personalized to my needs and it works fine
at the end of the roll in the zoom in should stop and i have three buttons who send me to other three sites
when i put the button on the stage this will not work.. probably is the code of the complexbutton who blocks the other buttonfunction....
im getting mad trying some possibilitys but nothing will work
an example of who i need to do the swf is on the site [URL]
i post the code of the complexbutton
stop();
this.onEnterFrame = function(){
if(rewind == true){
[Code].....
View 1 Replies
Aug 7, 2009
I have a movie clip with 15 frames. Each frame has buttons on it (mc's)... I was going to put the actions on the main timeline/stage and navigate within the MC from the main timeline. Is that possible? I can get the buttons on the first frame of the MC to work, but I can't seem to figure out how to target/make the buttons on the other frames work? I was thinking I could identify the path of the MC with the frame labels, but that doesn't seem to work. like: _root.RMChanger.(frame label).buttonOnFrame = function
I have to move a text box in and out over the MC backgrounds on the main stage... which is why I was thinking to do it this way? I've been switching back and forth bwtween AS2.0 and 3.0
View 9 Replies
Jul 8, 2005
I am having trouble with a job I am doing at the moment which has an mc with buttons within it. I want it so that when I roll over the mc it tweens from a small version to a larger version, and on this mc there are some buttons. At the moment I can get the mc to move but the buttons remain inactive and also the rollover states on the buttons don't work. I have attached a simpler version of what I am trying to do to this post.
View 3 Replies
Dec 4, 2009
I'm having problems with the flash buttons on the flash website i made for a client. or some reason the buttons in the top and bottom menu work on some people's computers but on some they don't. I don't know what to do, i had this code for all the buttons,
on (release) {
getURL("http://legaldepartment.ca/","_self");
}
and they worked on my computer but on others the buttons didn't work at all so i added this code to each button also
on(press) {
_root.getURL("http://legaldepartment.ca/","self");
}
and they still work on my computer and some other people's computers but still some they don't work on some people's computers.
View 2 Replies
Jun 1, 2011
I am using Flash CS4 with actionscript 2 to create an interacitve portfolio.I have 2 text buttons that work when I test them with "enable simple buttons." When I publish to IE these buttons won't work. I have created over 50 buttons using the same methods, they all work.
View 8 Replies
Dec 10, 2009
I'm trying to create an informative flash program on Mt. St. Helens about the dust cloud it created when it errupted. I have everything ready to go including the buttons and the pages the screen or next image it should take you to. I'm just stuck on how I get the buttons to actually take you to the next frame.
View 24 Replies
Feb 4, 2010
if i'm on the home page of this flash site, a button on the nav menu loads the correct scene the first time it's clicked, but if you nav to another scene and click the first one agin to return to it, nothing happens. why would a button behave one way on a scene and another way on another scene?
View 1 Replies
Apr 16, 2009
I've used flash like twice in my life, but I think I know how to make a button. I'm working on my artists portfolio online and I'm making it in flash. Basically it has buttons which link to photos and videos. There are 5 videos and 5 photographs. Now the problem is when you click on a button and watch a video buttons 1-3 of photos don't work. But the 4 and 5 buttons for photos work. It seems to only happen after you watch a video. The same actionscript is on all of them GotoandStop is the command I'm using for the photos and GotoandPlay for the videos.
View 3 Replies
Dec 10, 2008
I had all of my code working, then I moved all of my main movie timeline into a movie clip (body_mc)Main movie now has 1 frame.My body_mc has a navigation menu, one button is portfolio_bttn which takes you to that frame label. It persists through all frames of body_mc. This button works fine.I seem to have everything working except 4 buttons on the first frame of body_mc. They should all perform exactly the same function as portfolio_bttn. They exist only in frame 1.They work the first time you click one (any one).Navigate back to frame one of body_mc and all 4 buttons will no longer work. What am I doing wrong??here is my code which is in frame 1 of the main timeline
Code:
body_mc.portfolio_bttn.addEventListener(MouseEvent.CLICK, clickPortfolio);
function clickPortfolio(event:MouseEvent):void {
[code].....
View 19 Replies
Jun 1, 2009
[URL] the above site has small animated buttons that run through a sequence continuously until the user positions their mouse over the button then it launches into a 2nd sequence (all in the same movieclip). inside each movieclip there is the entire sequence and the first half is the bit that runs continuously - the second half is the mouse 'overstate'. the top layer has an invisible button and the action script:
[Code]...
View 3 Replies
Dec 16, 2009
I am a new comer to flash and I have been teaching myself actionscript 2.0 and I am now trying to move to action script 3.0 this seems a dumb question but for the life of me i can't figure out how to make my buttons work.i am trying to have the user click at button that connects to a movie clips and plays the movie, the movie stops then goes to the next frame of animation.
View 1 Replies
Jan 7, 2010
I am new to Flash and am having an issue with a project I'm working on. I have buttons that are in frame 1-150. I wrote the code in frame 1, but expanded the box to frame 150 so they will work. However latter in the project I want to be able to gotoAndStop frame 150, but when I do the buttons no longer work. I changed it to gotoAndStop frame 1 and they work. Can you not link to buttons in the middle of the "timeline".
View 1 Replies
Oct 24, 2008
I'm trying to convert an AS2 file over to AS3 and I can't get the buttons to work. They do not want to gotoAndStop at certain frames in specific scenes. In the following code, if you click on a button it works fine, but when you attemp to change to a new Scene, it breaks and both buttons won't work thereafter. I've tried everything for almost a day now and cannot get this to work and cannot find any reference to the problem. Is AS3 buttons not able to go to a new scene as it suggests in the Help files?:
View 17 Replies
Apr 1, 2010
i'm just learning Flash at a local college and my instruction is not being very helpful, so i'm hoping someone can help me. I need to insert a "start" button that will start the movie. I have the button on a layer called "startButton". I inserted another layer and called it "stopMovie" - this is where I add a keyframe on the 1st from and the last frame and then add a actionscript to stopmovie on both frames.
The problem I'm having is when I select the 1st frame of the layer where the button is localed, I go to the actionscript window/global fuction/timeline and then I want to select "play" but the system has it grayed out so I can't select it. My only option is "goto". But that doesn't work. All I want the funtion to do is start playing when I click on the start button.
View 1 Replies
Aug 11, 2009
I have a cascading/collapse flash menu.There are about 7 layers, each one of them a different page that slides and covers the other layers.for some reason, all the buttons on the bottom layer (layer 1 for instance) can be clicked on even when the 6 other layers are ontop of it with their own links and buttons. How can I make it so all my buttons don't shine through all the other layers. I can't slide the layer away to get ride of the buttons because it is still partially viewed when the other layers are ontop of it. I can't figure out why the buttons in layer one can be clicked in layer 2 when its on top of layer 1, or layer 3,4,5,6,7 when they are on top of layer 1-i assumed these layers would block out the buttons and links in the first layer(which is on the way bottom)
View 2 Replies
Feb 19, 2010
I'm designing a website for a Reiki/Spiritual advisor thingymebob and I have a menu on the left of my page of buttons and when I click a button it displays the contents of the button on the stage. Easy enough, so to speak, but the code I have written should send the viewer to a certain frame in the timeline where the tween begins.
When I play the swf and click the home button it works perfectly on the first page and if I go down the menu and click every other button in order they too all work fine, but as soon as I start clicking any other button randomly there is no tween effect and it seems to send me to the wrong page(!) plus straight to the clear text on the stage without any fading in tween. As though it has just gone to the last frame of the tween.
Here's the code below. I've asked the spiritual advisor for guidance and he sent me here, so please prove him right - ha ha!
stop();
myHome.addEventListener(MouseEvent.MOUSE_DOWN,
mouseDownHandler2);
function mouseDownHandler2(event:MouseEvent):void {
gotoAndPlay(281);
[code]....
View 1 Replies
May 8, 2009
Attached is an FLA with an image that moves onto the stage. There are 5 button MCs which are supposed to move the image left/right. Works great, only if the SWF is published for Version 6. However, published as a version 8 swf, the buttons no longer create motion. On a different thread, somebody published it as a version 8 and 9 SWF and said the buttons worked perfectly..FYI, clicking into the , imageStrip_mc is an Actions layer, as well as the Actions on the root timeline.I am using Mac OS X Flash CS 3 - v 9.0 - using ActionScript 2
View 2 Replies
Jun 16, 2009
stop();
reel_btn.addEventListener.(MouseEvent.CLICK, onReelClick);
samples_btn.addEventListener.(MouseEvent.CLICK, onSamplesClick);
about_btn.addEventListener.(MouseEvent.CLICK, onAboutClick);
contact_btn.addEventListener.(MouseEvent.CLICK, onContactClick);
function onReelClick(e:MouseEvent):void {
[Code] .....
This is the code I'm running, everything to the best of my knowledge is in order, however when I run the SWF none of the button's work, I'm not getting any error messages.
View 6 Replies
Jun 28, 2009
I have my main SWF into which I want to load an external swf...When I've tried using the following code...
var light:Loader = new Loader();
light.load(new URLRequest("light.swf"));
addChildAt(light, 1);
The SWF loads but the buttons inside it do not show. How do I load the swf and have the buttons inside it work? Anything inside of the external swf that is a movie clip works, but I'd like to be able to keep the up/down/over and hit features of the button.
View 2 Replies
Jul 7, 2009
Basically a button in my .swf works fine, but when put in any browser it doesnt work. The button is in the flag in the top left and is a link to my advertising agency.
This is the .swf - [URL] and this is it in a browser - [URL]My code to embed is :
<object type="application/x-shockwave-flash" allowScriptAccess="always" allowNetworking="all" height="700" width="900" align="middle" data="http://www.littlekingdesign.co.uk/rico/ricobanner2.swf"> <param name="allowNetworking" value="all" /> <param name="movie"
[Code].....
View 1 Replies
Nov 29, 2009
I have a 3 screen project and there are two buttons on each screen that have to be able to enable the user to jump to the appropriate screens when clicked on. I am totally new to flash and I have tried off and on for a couple weeks to figure this out in various books and online. I just can't figure out what I'm doing wrong.
View 1 Replies
Dec 6, 2009
Im very new to flash and a colleague provided me with perfectly functioning swf presentation. I opened it with flash to make some minor mods and now when i save the pause/play buttons he had put on the presentation no longer work no longer work.
View 1 Replies
