TypeError: Error #1009: Cannot access a property or method of a null object reference.at project4_v3_fla::MainTimeline/frame2()this error shows up at end of level 1 when screen to get to level 2 loads. i attached a link to the game.
View 1 RepliesTypeError: Error #1009: Cannot access a property or method of a null object reference. at MethodInfo-11() where is methodInfo-11?
[Code]....
Error #1009: Cannot access a property or method of a null object reference.
This is the error I cannot seem to understand. On the stage I have a movie clip, mcTree. It's keyframe is in frame 3143. There is no tween or anything. In frame 3144, I have the following actionscript:
mcTree.gotoAndStop(2);
I publish the movie and I get to frame 3144 then BAM TypeError: Error #1009: Cannot access a property or method of a null object reference.
at 2file_fla::MainTimeline/frame3144()
As you can tell, I'm more than 3000 frames into my animation here and have made it this far using this method, and it has worked.
So I created an animation with a preloader and a button. Whenever I view the animation in CS4, I get some null object reference errors- however, I couldn't for the life of me figure out why.
I decided to open the document in CS5.5 on my school computer- the animation worked perfectly! No errors anywhere. I exported the .swf file and opened it again on my laptop with CS4.
Any work-arounds to what appears to be a bogus error message?Multiple buttons to control a movie and one (defined with the exact same process/steps as the others) results in the 1120 error.[code]No syntax error, but test run results in 1120 error on the P_button event.Instances are established for both and the names are spelled correctly. Is there some undocumented feature about what characters can't be used in instances and button/movie definitions?
View 2 RepliesStarting new thread for this topic as suggested by forum. I have a website which tweens movieclip pages (named home, bio, music, video and contact). Love the effect and trying to keep it. Main timeline contains the main buttons (home_btn, bio_btn, music btn, video_btn, contact_btn). Music page has a XML mp3 player contained in it with button control. Video page has an encoded video with no code.
I need the following:
1 - Music and video to shut off as those pages/movieclips tween off the stage. Gets annoying with them playing especially at the same time
2 - Music player to play correctly. It is not with the new code.
I have the following code. The "Tween Code" is on frame 1 of the main timeline of the movie. The "MP3 code" is on frame 1 of the music movie clip. I am getting the following ERROR message when running my movie. I ran the Debugger as I publish and it points to music.my_channel.stop(); in below code. My thought process on this was that it would reach out to the music movieclip, find my_channel and stop it.
[Code]...
I have created an invisible button myButton_btn inside a moviclip with instance name supermarket_mc. The supermarket_mc is based on a class Supermarket, which has the following code and works fine.
public class Supermarket extends MovieClip
{
public function Supermarket()[code]....
Now, if I have a button on Stage they work fine when I add a listener to them. However, when I add a listener to myButton_btn ie:
supermarket_mc.myButton_btn .addEventListener(MouseEvent.CLICK, turn);
myButton_btn does not react to click events and I get an additional error Error #1009: Cannot access a property or method of a null object reference.I suspect that the MouseEvent.CLICK in the class definition overrides the MouseEvent.CLICK on the nested button.
I am not an expert in flash, but i do work with AS and tweak Flash projects , though not having deep expertise in it. Currently i need to revamp a flash website done by one another guy, and the code base given to me, upon execution is throwing the following error."--- TypeError: Error #1009: Cannot access a property or method of a null objectreference.atNewSite_fla::MainTimeline/__setProp_ContactOutP1_ContactOut_Contents_ 0() at NewSite_fla::MainTimeline/frame1() --"The structure of the project is like, it has theifferent sections split into different movie clips. There is no single main timeline, but click actions on different areas of seperate movie clips will take them between oneanother.All the AS logic of event handling are written inline in FLA , no seperate Document class exists.
Preloader Movie clip is the first one getting loaded. As i understood the error is getting thrown initially itself, and it is not happening due to any Action script logic written inline, because it is throwing error even before hitting the first inline AS code.I am not able to figure Out what exactly it causing the problem, or where to resolve it. I setup the stuff online, for reference if anybody want to take a look at it, and here is the link.You need to have flash debugger turned ON in your browser, if need to see the exception getting triggered.
I am not an expert in flash, but I do work with AS and tweak Flash projects, though not having deep expertise in it. Currently I need to revamp a flash website done by one another guy, and the code base given to me, upon execution is throwing the following error: TypeError: Error #1009: Cannot access a property or method of a null object reference. at NewSite_fla::MainTimeline/__setProp_ContactOutP1_ContactOut_Contents_0() at NewSite_fla::MainTimeline/frame1()
[Code]...
I added a flv into my Scene 1 then i added a new Scene.I just wanted to after finishing the .flv flash go to next scene.but when i added a new scene,and I test my movie,the .flv didnt show and i recieved these errors
[Code]...
This is my code,
stop();
button3.addEventListener(MouseEvent.CLICK, playClick3);
function playClick3(Event:MouseEvent):void {
gotoAndStop(422);
}
On frame 422 there is no code at the moment. I keep getting the error TypeError: Error #1009: Cannot access a property or method of a null object reference.
I've been away for a while and I just started to work on my new portfolio website (in flash). The design is finished and I followed a tutorial on youtube called the ''the fluid flash website to keep your flash website always centered''.The tutorial went good but when I wanted to go to another frame with other contents, an error appeared in the browser saying:
Code:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at serrick_port2_fla::MainTimeline/resizeDisplay()
The code for the website is:
Code:
stop();
import flash.events.MouseEvent;
var myStage:Stage = this.stage;
[code].....
when all my script code is in the first frame everything working fine, but when I put some code in second frame, i've got the error:
Code:TypeError: Error #1009: Cannot access a property or method of a null object reference.at khekhe_fla::MainTimeline/frame1()[code]....
in the second frame i've receive the error i wrote about in the beginning. (i click btn_training, script sends me to the second frame, and when i click btn_back i receive the error).
sometimes I get this strange error during gameplay:
Code:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
[code]...
I still don't know what causes the error. The only thing I discovered is that sometimes an object is null inside of my SoundManager. But I don't know why. I already checked all appropriate arrays if something's missing there but all seems to be ok there.
[code]...
I am trying to use the scroll pane component and I am having a few teething troubles. I have a scroll pane as a child object of a movie clip which is essentially a 'page', if I display this page it works fine and the scroll pane does too. If I then remove this page from the display list, go to another page and come back by readding it to the display list, I get the following error, even though nothing else has changed:
TypeError: Error #1009: Cannot access a property or method of a null object reference.at fl.containers::ScrollPane/fl.containers:ScrollPane::endDrag()
The scroll pane is still visible and works correctly, but ideally I'd like to stop this error.
I'm creating a simple gallery for a website which literally loads the next image when the image is clicked. I've set it up so that the images fade in. When i preview the .swf file in flash i get the below message:TypeError: Error #1009: Cannot access a property or method of a null object reference.atOutside_Portrait_fla::MainTimeline/fl_FadeSymbolIn_12()Everything seems to work ok, but im wondering if this is going to cause any problems. I've copied in the action script text which i have used below.
stop()
/btn1.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_9);
function fl_ClickToGoToAndStopAtFrame_9(event:MouseEvent):v oid
[code]....
want that everytime someone has wrong a letter, a frame of my movieclip appears and stop there until there's another error. I did it this why, but appears all the movieclip in the very first error. Here's the code.
public function entradaTexto (event:KeyboardEvent){
var charpress:String=(String.fromCharCode(event.charCo de));
var trouve:Boolean;
[code].....
Is there a good source of data for the install percentages of popular plugins?
View 3 RepliesAny one come across this situation where users of a cd-rom gets security problems when for example click on pdf button to view in separate window.
View 3 RepliesMaybe the title is not self explanatory but in most iphone games eg you click the correct example and you see a +100 points mc appear and rise and alpha out. I did this with a png done in photoshop BUT not all goes well - it doesn't work.
[Code]...
It seens perfct but I can't see it work. The funny thing is that the custom currentBubble - with a dot after you see the code hints but a dot after pb100 - you see no code hints. Well not normal.
I'm trying to set up a contact form but I get a #1009 error. I read somewhere that it has to do with false targeting but I can't find my error(s). Please help.
// Imports needed for radio button grouping
import fl.controls.RadioButton;
import fl.controls.RadioButtonGroup;[code].....
I have code on the first frame of timeline and code in a class file and when publishing I get Error 1046: Type was not found or was not a compile-time constant: MouseEvent. This error gets thrown on the frames where I have buttons and their corresponding MouseEvent code, thus the MouseEvent error I suppose.Although I don't know how to fix it, I tried adding import flash.events.*; to the first frame's code, which resolved the Error 1046, but then caused Error 1009: Cannot access a property or method of a null object reference pointing to line 29 of the class file which states container.addChild(btn); - the last item in the class file below.Each set of code works fine by itself, but when used together causes a problem. Can someone assist with what I need to change? I suppose there is some sort of conflict with the MouseEvents?
Code on the first frame:
ActionScript Code:
stop();
//tried adding import flash.events.*; but it caused Error 1046
I_acknowledge_btn.visible = false;[code].....
We have a requirement to create a video demo of certain products. What is the best way to make sure that the video plays on as many browsers as possible on all popular platforms (on Windows, Mac, Android, and iOS devices)? Current implementation: we just have Flash videos that load in a Flash player.
View 3 RepliesI've been trying to get multiple button to ease or tween like most of the popular sites. Mine seems to be not working correctly. I was wondering some one could look over my FLA (flash 8)
View 5 RepliesI just met a piece of error log when I was trying to resume the paused mp4 streaming. Here is the log from the server:
[INFO] [NioProcessor-1]
org.red5.io.mp4.impl.MP4Reader - Frame
position was not found for timestamp:
92000
I'm using Red5 newest 0.9.1 final for mac os x to stream the H.264/AAC encoded MP4 file to my flash app.
And there's no problem when I'm resuming the .flv file.
Below is my code, and the question is explained after it.
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
xmlns:cal="cal.*"
layout="absolute"[code]...
This is exact error message I get: TypeError: Error #1009: Cannot access a property or method of a null object reference.
So my problem here is, I'm working on my Adobe Air project, so I decided to code some buttons to be able to navigate. The problem here is that I get a error for trying to do so. Here is my code.
[Code]...
I do not see what is wrong actually, I tried this on a blank non-AIR file, and it worked well.
there I have a problem with this error #1009!I am making a platform game and I can not fix some bugs.When I use the debugger it says:"TypeError: Error #1009: Cannot access a property or method of a null object reference.at PlatformGame/checkCollisions()[D:gamePlatformGame.as:2445]at PlatformGame/gameLoop()[D:gamePlatformGame.as:951]".On line 2445 in the function checkCollisions() in my as3 file is the following code:
Code:
line 2445: if (hero.mc.hitTestObject(boss.mc))
line 2446:
[code].....
I just started learning ActionScript 3.0/Flash CS5 a day or two ago, and I am still very early on with it, however I do have some other web development experience with PHP and some Javascript. I am learning from a book that was written for Flash CS4, but it did not seem like a whole bunch was different. I am now getting "Error #1009: Cannot access a property or method of a null object reference. at Main()"
I did several searches for the problem here, but most of the threads referencing this error are far more complex than what I am trying to do, involving multiple, long class files and the timeline. I have been unable to solve my problem after reading through various threads for hours now. Most of the fixes had to do with the timeline, however, all of my GUI is in one frame with no animation.
[Code]...
However I been coming up with an error which is this :
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at Corestructure_Scene1_fla::MainTimeline/movingPlayer()[Corestructure_S cene1_fla.MainTimeline::frame4:83]
[code].....