ActionScript 3.0 :: Have A Movieclip (hairline Stroke) And After Changing Its Width Or Height It Disappears?
Jan 4, 2010i have a movieclip (hairline stroke) and after changing its width or height it disappears...
View 1 Replies
Similar Posts:
ActionScript 3.0 :: Flash CS5 - MovieClip Disappears When Dynamically Changing Width/height Property
Feb 21, 2012a movie clip symbol is designed and subclassed in Flash, but get instanced and addChild-ed in AS3. It works well as long as I don't change it's width/height property (scaling works too), but if i do, it disappears
View 2 RepliesActionScript 3.0 :: MovieClip With Outline - Changing Width / Height
Aug 29, 2009I develop some components where I use movie clips as skin. In the scene I have 2 movie clips with width 200px and height 100px, one of them I change the width to 200px and height to 100px, well, it should remain the size as nothing happens but it doesn't. The movie clip that I change the size through as3 it's actually getting smaller, and more strange, it only happens when the movie clip has an Outline. The file is attached. It's Flash CS4.
View 2 RepliesActionScript 3.0 :: LineGradientStyle - Drawing Hairline Stroke?
Jun 3, 2010I am trying to draw a hairline stroke 200 px long like in the picture (3 colors). I have tried with this but i am not getting the same results:
Code:
var s:Sprite = new Sprite();
s.graphics.lineStyle(0 );
s.graphics.lineGradientStyle("linear", [0x111111, 0xcccccc,0x111111], [100,100,100], [0,128,255]);
s.graphics.lineTo(200,0);
addChild(s);
ActionScript 3.0 :: Keep Stroke Weight While Changing Width?
Mar 16, 2010I have a movieclip 'cursor' with in it two rectangles. One of them is dark and one is light, so the cursor is blinking. Now, when I want to change the width of this cursor to 150 (where it was 30 before), I do:
Code:
cursor.width = 150;
This not only changes the width of this movieclip, but also the weigth of the (whole) stroke of the two recangles. How can I prevent this strokechange from happening?
AS3 :: IDE - Changing .swf Width And Height
Dec 13, 2009Is there any possibility to change screen width and height not in Flash ( in Properties ), but in Code [ any AS3 line? ].
View 1 RepliesActionScript 2.0 :: Dynamically Changing Height And Width
Aug 11, 2005I want to change the height and width of an object (specifically doubling it) after an interval of 2 seconds until the height and width of the object reach over 100. I've made two different scripts to try to make this possible.
[Code]...
ActionScript 3.0 :: Changing The Height Of A 1px Line Changes The Width Too?
Apr 13, 2009I have a movieclip that has a 1px wide line by 10px high. Im trying to resize that line with tweenlite, however when i change the height it makes it wider too... How can i do this and keep the line 1px?
View 2 RepliesActionScript 2.0 :: Change Movie Clip Height For More Then 220 Hairline Gets Thick
Aug 19, 2004Check out "Attach Files".. I want to make a cube motion where my hairline will stay skinny.. (left cube) but if I change movie clip height for more then 220 my hairline gets thick! (right cube)
View 5 RepliesActionScript 3.0 :: Changing Width Of Sprite Seems To Change Height Too?
Feb 5, 2009Here is some code I have.
[code]
_buttonUnderline = new Sprite();
with(_buttonUnderline.graphics) {
[/code].....
When the Tween takes place though it not only changes the width, it changes the height as if it were scaling it up in both directions. Why does this behavior take place? And how can I get it so that only the width changes? I have also tried using scaleX as the property but it does the same thing.
ActionScript 1/2 :: Dynamically Changing The Height And Width Of Stage?
Jun 3, 2009how can I change the height and width of stage dynamically. I tried it with the following code:
Stage.height = 250;
Stage.width = 250;
during the run time. Initially the Stage is at a height and width of 370 and 450 respectively. Also when I tried to trace the height and width of Stage after resizing the stage width and height, its showing the old value of width and height. That means the width and height not chnaging.
ActionScript 3.0 :: Programmatically Changing Symbol Width And Height
Oct 11, 2009I am trying to change the width and height of instances of a symbol programmatically. Basically, the symbol contains a few colored rectangles, a bitmap, and some text. I want to change the height and width of each instance of the symbol based on how low the text string is that is in the instance's text field, but the bitmap's size should always stay the same, 24x24 pixels.[code]The problem is that using this code seems to scale everything up, including the bitmap. I have tried to programmatically add the 24x24 pixel bitmap to the symbol programmatically after I changed the height, but it still seems to be scaled..
View 1 RepliesFlex :: Changing Width / Height Can't Affect Contents
Jul 13, 2010I thought I had a handle on AS3, DisplayObjectContainers, etc. but this basic thing is really confusing me: changing the width/height of a sprite does not affect it's visual contents - either graphics drawn within it or any children it may have.[code]...
View 2 RepliesActionScript 3.0 :: Changing Width Of Sprite Also Seems To Change It's Height?
Feb 5, 2009[code]When the Tween takes place though it not only changes the width, it changes the height as if it were scaling it up in both directions. Why does this behavior take place? And how can I get it so that only the width changes? I have also tried using scaleX as the property but it does the same thing.
View 1 RepliesActionScript 3.0 :: Flash Referencing Stage.width/height References Mc.width/height?
Jul 29, 2010I am trying to reference to top level (stage) width and height of the main stage for the placement of something located inside a movieclip on the stage.
My code is:
Code:
my_loader.x = (stage.stageWidth - my_loader.width)/2;
my_loader.y = (stage.stageHeight - my_loader.height)/2;
But this seems to just relate to the width/height of the mc that my_loader is nested in...
I have tried the following and had no luck:
stage.stage.stageWidth
root.stage.stageWidth
parent.stage.stageWidth
MovieClip(root).stage.stageWidth
ActionScript 1/2 :: Load External Image Of Different Height & Width Into Same Height And Width
Jun 12, 2009i want to load external images of different height and width into same height and width.
View 3 RepliesActionScript 2.0 :: Load External Image Of Different Height & Width Into Same Height And Width?
Feb 24, 2010i want to load external images of different height and width into same height and width.
View 0 RepliesFlex :: Changing ScaleX/scaleY On Parent Scales The Children But Doesn't Update Height/width Property?
Nov 23, 2010I have created a custom component - MyImage - that has two children including a Bitmap as well as a Sprite.My display object hierarchy is as follows -
mx:Canvas
view:MyImage
mx:Bitmap
[code].....
ActionScript 3.0 :: Get The Width Or Height Of The Parent Movieclip It Always Showing The Values Of The Small Nested Movieclip
Jun 1, 2010i am using a movieclip who has two nested movieclips, the problem i am dealing is that when i try to get the width or height of the parent movieclip it always showing the values of the small nested movieclip, when i draw the movieclip it draw perfect but when i read this values shows that error, what can i do?
View 2 RepliesActionscript 2.0 :: Change Width - Height And Width / Height Ration In Flv?
Mar 25, 2011I would like to use a movieclip to load a flv video. The problem I have is that I want to change the video dimensions. I've tried several software to change the video dimensions but as far as it seems all of them keep the same height-width ratio than in the original video. Is there any software that would allow me to change the height and width without keeping the same height/width ratio as in the original video file?
View 1 RepliesSet The Movieclip Width And Height With The Button?
Mar 18, 2010i want to zoom the movie clip, for this i have set the movieclip width and height with the button. It is correct or anything els
View 2 RepliesActionscript 3 :: Movieclip Width Changes Instead Of Height?
Apr 9, 2012I'm working in Flash Builder 4.5 in pure Actionscript 3.0
I have a movieclip (swc) , I am doing the following :
_visualItem.bgMiddle.height = 200;
bgMiddle is an independant clip only has a single shape in it. On debugging the height remains the same (2.2) but the width changes to 5111. Haven't been able to track it down.
ActionScript 3.0 :: Movieclip Height And Width
Nov 11, 2010I'm making a little photo album in flash, where my pictures are being added in a movie clip. The problem I have is when I add a with and height to my movie clip, I can't see it anymore. It's probably a stupid mistake, but I've been searching for an solution these past days, but I didn't find any.
(when I don't add the width and height, I can see the pictures) Here's a little part of the code.
Code:
var mc:MovieClip = new MovieClip();
mc.width=300;
mc.height=100;
[Code].....
ActionScript 2.0 :: Change Width And Height Of Movieclip?
Mar 19, 2000I'm making a program like roomplanner at [url]..
I need to know how to change the width and the height of the movie clip. I know how to scale x and y but that doesn�t work in my case because i have for example an object which height is 75 pixels and width is 137 pixels. X scale and Y scale would work if my objects were 100 pixels width and 100 pixels height.
Actionscript :: Flash MovieClip Width And Height Always Zero
Jan 26, 2010I'm loading a flash MovieClip (Test.swf) like below. The problem is I can't read the size of mc (mc.width and mc._width both return 0, for the height as well), but I need to scale it. I have the stage size, I can scale, but I don't have the size of Test.swf, so I can't scale it to fit into the stage... ActionScript2, not actionscript3. If it was 3, I could get the value from the loader, but with as2??? The problem is I don't have control over the swf I load, so I can't put it's dimensions in the first frame...
[Code]...
ActionScript 3.0 :: Why Get Wrong Movieclip Width/height
Jul 8, 2010I've a movieclip in my library ready for export to ActionScript. It's width and height is (723, 614.05), but I tried to put it on stage manually and check. When I get the item from library in ActionScript i get that's it's width and height is (743.65, 626.75). How can that be possible?
View 9 RepliesActionScript 3.0 :: Change Width And Height For MovieClip?
Aug 13, 2010I know there have been several similar posts but of those I've read, there hasn't been an easy straight forward solution that will work dynamically. The solutions posted have ranged from
super.width = wvalue;
super.height = hvalue;
which I did not get to work, and it seemed from the response to the suggestion neither could the person who originally asked for help, to suggestions about using scale, all the way to having to create an event handler that will get notified after the load, which I guess would work once but wouldn't work dynamically.
Here is the scenario -
I want to change width and height for a MovieClip, but I dont want to scale it, (its more like cropping the MovieClip, not shrinking or stretching) and I want to do this several times not just after the load of the MovieClip.
So my questions are:
1) Is there anyway to do this that really works, that hopefully isn't totally convoluted?
2) Why is it so hard to do this in Flash/AS3?
ActionScript 2.0 :: Maximum Height / Width Of MovieClip
Oct 26, 2004How can I actionscript the maximum height (and width) of a movieclip??
View 2 RepliesActionScript 2.0 :: Change The MovieClip Height And Width?
Aug 18, 2008I use FlashMX 2004. how to change the width and height of the MovieClip when it loads to the stage. I used the following method
instanceName._height=value
instanceName._width=value
but when I do like this movie does not load. when I do this method to vary x and y position of the movie it works.
ActionScript 2.0 :: Slider To Control The Width And Height Of A Movieclip?
Apr 16, 2007I have created a slider to control the width and height of a movieclip. However the numbers currently go the opposite way I would like them to go. currently if the slider is at the top that counts as 0 because of the y coordinate and the bottom counts as 200. what type of equation would I need to flip this so if the slider is at the top it's 200 and at the bottom it is 0?
Code:
zoom_mc.slider_mc.onPress = function() {
this.startDrag(false, 0, 0, 0, 192);
};
[Code]....