I have a movie clip which contains 5 frame labels : one,two,three,four,five And I have next and prev button to move around
[Code]...
there's one note to be taken, I am required to put all my codes on my main timeline I can put stop(); inside my other movie clip,but only that actionscript is allowed *sigh
have 1 button inbeded in a movie clip named mcintroclp that is on frame 1 of my main timeline, Frame 2 is labeled port_btn on the main timeline. In the timeline of the movie clip mcintroclp I've put the code:
stop();
function buttonClick(event:MouseEvent):void
{
[code]......
im trying to navigate through a movie clip and stop at frame labels using individual buttons to call to individual labels while being able to see the on the way to the frame(for a blurred effect).my goal is to jump from point A to point F to point Z and see all the frames in between and visa versa.
View 1 RepliesI've got a preloader file for a website which loads my main movie into an empty movie clip. I need to create different versions of the loader which load the same main movie but at different frame labels (each frame label is a section my site- about, contact etc.) Here is the relevent part of the actionscript for my preloader. I can't seem to get it to load to, for example, frame 3 which is a label called "credits"
[Code]...
I have an array that holds a list of items. In a movie clip, I have that same list as the frame labels. I'm using a for loop to iterate through the array and then assigning event listeners so that when you roll over an icon, it sends the movie clip to the right frame label (matching the item in the array).
However, the code I have now only returns the first match and not any of the others. Here's my code:
Code:
for (var j:uint = 0; j<interiorCallouts.length; j++) {
featureTextArray[j].text = interiorCallouts[j];
featureArray.length = interiorCallouts.length;
[Code]....
See the showCallout function. I'm using the interiorCallouts array to match the frame label in the callouts_mc, but I'm only getting the first match. None of the others.
i have movie clip named serviceMenu which is instance of menuAll in Scene 1
scene 1 have 8 labels:
serv1 - serv2 - serv3 - serv4 - serv5 - serv6 - serv7 - serv8
inside serviceMenu i have 8 buttons
when i doubleclick serviceMenu it take me inside
menuAll which have 3 layers
1- 1 keyframe actions
2-1 keyframe for the button
here is the code for one of the buttons
servSix_btn.addEventListener(MouseEvent.CLICK, goServ6);
function goServ6(event:MouseEvent):void
{
serviceMenu.gotoAndStop("serv6", "Scene 1");
trace("button Clicked")
}
and here is the error: "1120: Access of undefined property serviceMenu."
am trying to target scene 1 labels
it isn't such a big problem bur for a beginner like me it is.I have a movie clip called "Lion_beginning_mc", inside of it I have 3 Key Frames and Inside each and one of them I have different shapes.For example:Key Frame number 01 - DogKey Frame number 02 - CatKey Frame number 03 - MouseI want to move this movie clip "Lion Beginning_mc" form Key frame number 1 to Key frame number 20.I want the Dog,Cat and a mouse to change between each other only once while moving from Key Frame number 1 to 20.And then when the movie clip "Lion Beginning_mc" reaches his goal another movie clip or a frame (with a shape) will start.
View 5 RepliesScene1->MovieClip1->Image1(as a button)Scene1->MovieClip2->MovieClip3->MovieClip4->frame1Now I want to call frame1 from Img1 have a parent Scene1 common.How can I do this.I have tried
on(release){
_parent.MovieClip2.MovieClip3.MovieClip4.gotoAndPl ay("frame1");
}
[code].....
i created a two layer in time line in one layer there is a movieclip called mc1. In the same layer in 15th frame i have another movie clip mc2. Inside the movieclip mc2 i created another movie clip at frame10 now if i clik the the mc1 on first frame The movie clip should goto and stop at tenth frame
View 4 Repliesi have a movie clip with a dynamic text field being animated...i have a text file with this in it
&textline1=time
&textline2=place
&textline3=year
&textline4=month
now how do i make the movie clip to first go from frame 1 to 10( last frame in teh movieclip) with the text time and then when the movie clip starts again it should say place and so on and so forth.. depending on how many textline variables i define in the text file?
is it possible to link a frame inside a movie clip from main time line?
View 4 Repliesi'm very new at flash and finally ended all the work i wanted to do here. now i just need to had the actions so it will run properly. basically i just need it to stop in each frame and run the animation of the movie clip on that frame. if it's i can put the project here so you can see what and were i need to had the actions.
View 1 RepliesI have a character, And in its movieclip I`ve got 3 frames (first has an idle pose, second a walking pose and third a running pose), each with a movieclip with an action in it.Well, what I wanted is that when I am walking with this character, and press the SHIFT key he runs.And I`ve got the following code
if (Key.isDown(Key.LEFT))[code]....
But when I click the shift button, he shows the first frame static of the movie clip in frame 3 (running frame).
I would like play head of a movie clip to return to a certain frame of that clip so a MC inside it would loop. I now have: stop(); as the action.
View 2 Repliesi've tried placing the code in the actions pnel of the mc; on the mc at the main time line and in various other unspeakable places... but i always get the same error warning me that this code can only be used in movieclip instances and that my stupidity levels are reaching dangerous levels. (error: 'Symbol=stage_mc, Layer=actions, Frame=1: Line 5: Clip events are permitted only for movie clip instances
onClipEvent(enterFrame){'
i fear somebody will reply to this with:'the code goes on the movieclip instance'...at which point i will take up a career in knitting (i knew i shouldn't have given up the course in the first place)
I have an invisible button and only one mc, the mc loops 3x then stops, this is defined with as in mc.
Now i want to play the movie from the invisible button but only loop it once. Which means i would like to play it from frame 1 to frame 215.
And also when u rollout i would like the movie to stop and go to frame 1.
this is my button code so far
Code:
on (rollOver) {
tellTarget ("loader")
{
[Code]......
I am making a quiz/game, and it works like this, two teams that have to take over the united states, by answering history questions, so right now I have it were when you click on a state, it takes you to a question (on a different frame in the main timeline), then I have a problem, if you get the question right it takes you to the "board" of the United States (that works), but when you are back the color of the state should change its color to red (on frame of the clip) if south got it and blue (another frame of the clip) if north got itBut instead i changes back to grey (default color, all start grey to begin with). I don't and can't seem to figure this out
View 2 RepliesIm using Flash MX (the pre-02004 version) to design a photo portfolio that will be distributed on CDs to potential clients.Its broken up into subject galleries, each of which is its own movie clip.The pages of those gallery movie clips are all separate movie clips, too, regardless of whether they contain single images or layouts of images. Frame labels with stop codes separate each gallery_mc.
Within each gallery, previous and next buttons allow page-to-page navigation.From the last page of gallery_A_mc (e.g.), I can to go to the first page of gallery_B_mc by using the following ActionScript:
on (release) {
this._parent.gotoAndStop("gallery_B_FrameLabel");
}[code]....
Id think that this should make it go to frame 5 of gallery_B_mc,which is on the gallery_B_ FrameLabel, but it doesn't make it go anywhere.
on (release) {
this._parent.gotoAndStop("gallery_B_mc", 5);
}
Also doesnt make it go anywhere.
I have a movieclip in frame1 and there is a button in this movieclip.I have another movieclip in frame10 and this movieclip's instance name is "dene".When i clicked the button in the frame1's movieclip, i want to go 70 th frame in movieclip which's instance name is "dene".
When i write _root.gotoAndStop(10); i can go frame10 in mainstage but i can't go to movieclip "dene"'s 70th frame.I tried this code but it doesn't work;
on (press) {
_root.dene.gotoAndPlay(70);
}
For example if I wanted an action to occur untilt the movie hit the frame label I would ideally be able to do somethign along the lines of:
do {
play ();
} while (_currentFrame != "label name");
This does not seem to work, but I am hoping that this is close to something that willObviously, I can put an action to stop the clip in the labeled frame, but I only want it to stop there under certain conditions . . .
I am building a large project that could be subject to change during it's construction, I am stressing out a bit because I am relying on the timeline to go foward and backward through the structure, (as well as user having the ability to use a menu to go where ever they want). So apart form the menu that specifies where to go, there is a forward and back button using next and previous frame to go forward and backwards.
So, what if after building a large section of this, the client wants to put in an extra page? this will upset all of my navigation (OR if I put the extra page at the end of the timeline the menu will work fine but the forward adn backwards buttons wont work properly) So should I be using frame labels instead of frame numbers? (How do I do this gotoAndStop(?) Or is there some other way I should be approaching this? like having a variable to keep track of page number instead of frame numbers?
I added some actionscript 3 to an app with 5 repeated sets of animations each beginning with a different frame label. The different frame labels are at frame 1, 31, 61, 91, and 121. Here is the actionscript.
[Code]...
I am building a large project that could be subject to change during it's construction, I am stressing out a bit because I am relying on the timeline to go foward and backward through the structure, (as well as user having the ability to use a menu to go where ever they want). So apart form the menu that specifies where to go, there is a forward and back button using next and previous frame to go forward and backwards.
.. So, what if after building a large section of this, the client wants to put in an extra page? this will upset all of my navigation (OR if I put the extra page at the end of the timeline the menu will work fine but the forward adn backwards buttons wont work properly)
So should I be using frame labels instead of frame numbers? (How do I do this gotoAndStop(? );)Or is there some other way I should be approaching this? like haveing a variable to keep track of page number instead of frame numbers? Use frame labels instead of frame numbers?
I need a code that'll allow me to go to the next frame on the main timeline from the prev frame with is a movieclip of MCs that already have actions script animating them.
View 1 RepliesI use scrollbar at the bottom of the timeline to go to different frames. This is slow if I have thousands of frames. I wonder if there is a similar interface like the Actions window for labels on timeline. I mean you can see all the scripts at left pane and be able to go there directly by clicking on anyone on the list. I would be nice if you can see all your labels in a menu and click to go there directly (I believe Director has that). Maybe I can put some dummy script in different label and then I can use Action window to travel to there.
View 2 RepliesI have a button on the main stage, and a movieclip "qccontent". When the user presses the button, I am trying to check if the MC is on a specific frame label. The MC starts on a stopped frame labeled "closed".
Right now, each time the button is pressed, it currently goes and plays the label "closemenohit". It is not reading the first part.
[AS]
on (release) {
if (_root.qccontent._currentframe("closed")) {
_root.qccontent.gotoAndPlay("openme");
[Code].....
I use Flash MX and I'm beginner. I have movieclip "dot" at Frame 85. I have in Actions of Frame 85 the following:
i = 1
ii = 100
while(i < ii){
[Code]....
I need to stop (remove) all movie clip instances (created with duplicateMovieClip) at frame 120. I suppose that I should use removeMovieClip();, but I have no idea where and how to use it.
I am new to actionscript 3 and i am currently doing a school project.
basically i have a instance of rocketShip which follows the mouse and i want instances of bullet to appear on the right of the screen and travel to the left. i can add hit test ect, all i need is the bullet to appear on screen. [code]...
I have a Movie Clip that has 4 pictures on 4 frames.There is also a stop(); action after each picture. What I'm trying to do is have a button that is right below the movie clip and when clicked, it goes to the next picture in the series. How can I do this?
View 1 RepliesI am using Flash CS4 and i have made some short movie clips. I want one of them to play on frame 24 once and then the next on frame 48 ect. How would i do this?
View 3 Replies
