have 1 button inbeded in a movie clip named mcintroclp that is on frame 1 of my main timeline, Frame 2 is labeled port_btn on the main timeline. In the timeline of the movie clip mcintroclp I've put the code:
stop();
function buttonClick(event:MouseEvent):void
{
[code]......
im trying to navigate through a movie clip and stop at frame labels using individual buttons to call to individual labels while being able to see the on the way to the frame(for a blurred effect).my goal is to jump from point A to point F to point Z and see all the frames in between and visa versa.
View 1 RepliesI have a movie clip which contains 5 frame labels : one,two,three,four,five And I have next and prev button to move around
[Code]...
there's one note to be taken, I am required to put all my codes on my main timeline I can put stop(); inside my other movie clip,but only that actionscript is allowed *sigh
i have all my buttons on frame 2. im creating a real estate site and i have to have a couple links like HOME ABOUT BUYING SELLING CONTACT, the thing though is that in the BUYING and SELLING frames i want to add more sections and links but only on these 2 other parts of my site. when i code it and add new buttons to these sections though my movie plays over and over and over non stop. heres my coding...
FRAME 1 preloader
Frame 2 has a frame label of home and all the buttons on a diff layer, and AS3 on a different layer
Frame 3 has a frame label for about section
Frame 4 is my contact for example
so if i create a new button in the about frame label and just add the code to the working as3 code on frame 2 my movie just plays over and over and over again, and all i want it do do is act like the other buttons and go to a different frame label down in the time line. the only way i get it to work is if i have ALL my buttons on frame 2.
frame 1
my preloader
frame2
home_btn.addEventListener(MouseEvent.CLICK, onHome)
function onHome(event.MouseEvent):void
[Code]....
i enter my btn code just like this and the buttons on frame 2 work but any new buttons i try and creat and put into different frames othere then frame label "home" aka frame 2 wont work
I am trying to use buttons to jump to frame labels. They jump to the label just fine, but they won't stop when pressed again. Below is the code I am using to have the button rest when pressed again.
getting_btn.addEventListener(MouseEvent.CLICK, gettingStarted);
function gettingStarted(evt:MouseEvent):void {
gotoAndPlay("ipad_in");
[code]...
I created a picture gallery in it's own file called slide, and i've made an mc in another file so i could embed the gallery in it. The images are enlarged on Scene 1 and the small image icons are in there own mc. The buttons work fine when testing the movie from the picture gallery's own file, each button has the following code.
on (rollOver) {
_root.gotoAndPlay ("framelabelname");
}
But when i test movie in the second file where the photo gallery is embeded, the gallery pops up, the bottom arrow buttons work to toggle between the image icon buttons but when you roll over the image icons to call a certain frame label, nothing happens, it just stays on frame 1. So frustrating because i'm doing this for a client who is paying for it to be done and I don't understand why it doesn't work right when embedded into a different file..
I'm creating website that I want to put my resume and portfolio on as different Flash applications. For my resume it would be like a mini-web site that has various linking buttons to different pages. I tried to use scenes b/c I had a professor who told us to use scenes to create our pages/animations, and the scenes concept did not work with the actionscripting.
I then read online that scenes were not the way to go. So I'm trying to use Frame Labels to create this - right now I made a menu movie clip that I have my actionscript in for each button - the buttons have the correct instance names and I have my frames properly labeled with their movie clips attached to each for each part of the resume/page portion.
This is the code I'm using in the Menu movie clip. The problem I'm having is that when I click on each button - nothing happens! I tried this one, and nothing happened:
education.addEventListener(MouseEvent.CLICK, educationCLICK);
function educationCLICK(event:MouseEvent):void{
gotoAndPlay('education');
};
And then I tried to re-order it and nothing happened:
function educationCLICK(event:MouseEvent):void{
gotoAndPlay('education');
};
education.addEventListener(MouseEvent.CLICK, educationCLICK);
I have 5 overlapping tab buttons and when each is clicked, it calls to a specific frame. The tabs are assigned to a specific frame so that when the timeline jumps to the assigned frame, the tab clicked appears on top of the other tabs. My code below works, but only once. If I click a tab and then try to click a previous tab, nothing happens.
FYI: My 5 tab names are: rotating_globe, company_tab_mc, newproducts_tab_mc, applications_tab_mc and tradeshows_tab_mc
There's also a 'back_home_btn' that appears on the stage when user is not clicked on the 'rotating_globe' tab (the 'rotating_globe' tab is my default home button)
stop();
import flash.events.MouseEvent;
rotating_globe.addEventListener(MouseEvent.CLICK, rotatingGlobeBtnHandler2);
company_tab_mc.addEventListener(MouseEvent.CLICK, companyBtnHandler2);
newproducts_tab_mc.addEventListener(MouseEvent.CLI CK, newproductsBtnHandler2);
[Code]....
I'm trying to loop back to the first frame of a movie clip using buttons. The movie clip is on a single frame on the main timeline. The buttons control the animation within the movie clip. The movie clip has three frames, and when I get to the last frame, I don't know how to write the code to go back to frame one, on the forth press of the next button. The code I'm using is below:
[Code]...
I've been working on a new issue while giving a break on cracking the other one.I have a movie clip acting as a button with rollover/rollout animation- we'll call it menu_mc for simple reference.I'm basically creating a rollover submenu. I've set it up a few different ways but the most user friendly has been hiding the submenu_mc (which has 4 linked buttons to root frame inside) by doing:
_root.sub5_mc._visible = false;
then inside the menu_mc with the rollover I have the submenu trigger set to show:
_root.sub5_mc._visible = true;
[code]........
I have a long timeline with a series of slides arranged along it with a labeled frame at the beginning of each slide.These slides do not have any standardized length so instead of counting out frames and jumping a set number I am trying to navigate with my previous and next buttons to frame labels stored in an array.
This works GREAT!Or rather...it works great if you're rapidly hitting the Next and Previous buttons to step through the area.The problem comes when you sit and try to watch the whole thing play out and then try to use the next button.If you have passed framelabel2 and hit the next button it returns you to framelabel2.If you have passed framelabel3 and hit the next button it returns you to framelabel2. Clearly the problem is that it does not know it has gone past framelabel1 and is thus gotoandplay-ing the next frame in the array...which is 2.I need to make it check its current position in the array before adding 1 and advancing the playhead.
var fLabels:Array = new Array("start1", "start2", "start3", "start4", "start5", "start6", "start7");
var cLabel:Number = 1;
function nextPlayClick(evt:MouseEvent):void {[code].....
I have three animated buttonMc's with code like this on them..
on (rollOver) {gotoAndPlay(2);
}
on (rollOut) {gotoAndPlay(8);
}
on (release) {gotoAndStop(16);
_root.mtClip.play();
[Code]...
Currently If I want to add five more buttons the code must be duplicated for each buttonMC and this seems really inefficient. This is the only way I have been able to make everything work though.
I have a flash site that has a presentation page it has a menu of two buttons (1) to take you to a slide show and (2) that takes you to the gallery. These are the only two buttons that seem to work in control test movie, I get no errors. The only button that is connected is the slideshow button (I haven't done the gallery yet). This button takes you to frame two. Where I have the main website. It has its own menu that spans across the entire website which is 25 frames.
Each frame represents a new page. I have mini menus at frames 3, 5, and ten. That are supposed to just advance the user to correct frame labels and stop. The only buttons that work are the ones in the first frames. The rollovers appear to work on all the pages when I advance the movie using the [ . ] key but I get no trace statement which means that it is not being acknowledged, all my buttons are named properly I believe so here is the code as well, all is in frame one:
stop();
//handle events for buttons...
Gallery.addEventListener(MouseEvent.CLICK, clickSection);
Home.addEventListener(MouseEvent.CLICK, clickSection);
Location.addEventListener(MouseEvent.CLICK, clickSection);
Guest.addEventListener(MouseEvent.CLICK, clickSection);
Lodging.addEventListener(MouseEvent.CLICK, clickSection);
[Code] .....
I am building a website in flash for a design class (emphasis on design, nothing taught with actionscript)
I need help trying to figure out the actionscript for allowing buttons inside a movie clip symbol to navigate pages at the parent/root/main timeline level.
With this site I have the mainMenu as a Movie Clip symbol and have the menu items populate with animation inside the movie clip. I need these buttons when pressed to navigate to different parts of the site that are controlled on the main level of the site (outside of the movie clip the buttons reside in).
I have given the buttons instance names, btnDining in the movie clip symbol. The movie clip symbol is call mainMenu. In the main level, I have labels for the different states/pages I want the website to have (dining, accommodations, etc)
[Code]...
I don't know if it is best to run the code from inside the movie clip symbol and call the different view on the main stage/level of the flash or if I try to run from the main stage/level and reference the buttons inside the movie clip symbol.
Please help me figure this out, I am trying to go a little above and beyond on this project. I have been struggling on this for days and I have looked at tutorials, books I have on actionscript, etc.
I've got a preloader file for a website which loads my main movie into an empty movie clip. I need to create different versions of the loader which load the same main movie but at different frame labels (each frame label is a section my site- about, contact etc.) Here is the relevent part of the actionscript for my preloader. I can't seem to get it to load to, for example, frame 3 which is a label called "credits"
[Code]...
Is there a possible issue in the way the button is made not coded? I am using Flash CS4. My buttons seem not to work. I do not think issue is in the action script (I am scripting in 3.0). Here is the way I make the button. I add a movie clip on the stage on the over state ( so if you were to double click on that movie clip a new time line would open), at the end of that movie clip there is a simple stop(); code on its own line. I do not add extra frame on the over state. Then I assign the code to the button and of course cross reference its name in the properties and everything is matching up. Just in case here is my code:
[Code]...
I have 12 movie clip buttons on the main page (3 rows of 4 buttons).When a button is pressed,it gives the answer to a question which remains visible.On this answer screen, there is another button to click for further information. I pointed to this button to go to another frame within the same movieclip (containing the further information).However, this "further information" shows up UNDERNEATH the 12 buttons, and you can't read it.
View 14 RepliesI made some custom buttons in flash cs5 and AS3. How do I increase the hit area on the buttons?
View 4 RepliesI'm fairly new to flash so please excuse my lack of knowledge...using AS3 basically I had a situation arranged where when a button was clicked and flash would then display a certain image by jumping to a label on the timeline, and by clicking a different button a different image would be shown. this was working pretty well but for layout reasons I had to split these buttons and the timeline that they relate to up into separate movie clips. obviously the buttons dont do anything now, but what i'm hoping to find out is how I can link these items back up despite them being in separate movie clips. is this possible? i'm just wanting them to do the same thing they did when they were both in the same movieclip.
View 10 RepliesI've got a timeline of events going on with about a dozen frames and about a dozen buttons. Clicking on each button will take you to a different frame. Simple enough. I have no problem with fading the specific frames in (I make the whole content of the frame a movie clip, then tween the alpha programatically as soon as you enter that frame). The issue I have is fading it out, so when you click on another button, that content on the current frame fades out and then you jump to a separate labeled frame, where the new content fades in).
View 7 RepliesI am working with an iMAC running 10.6.8.I have created a flash file with only the main scene, which has a List button and a Home button. The List button has 20 links as a scroll list, each link installs a movie clip from the library.The problem I am having is the List button works fine until I add the Home button, then the Home button works fine, but the List button only works on the frame that the action is on. Each button is on it's own layer, and runs the whole length of the show, which is 220 frames. I have a stop label at each place a movie clip is to play.
If I remove the Home button from the main scene and put it into each movie clip, how do I tell the movie clip to go to the main scene frame 1?
I've got an infographic I'm working on, and every time I roll over an image (a ring) the alpha goes up to 100, then I roll out and it goes back to 50. That much I'm good with.
Then, I click on each one of them, and a movie clip (built inside of each ring/button) pops up and plays. Fair enough.
I've got a script (ugly, but it works!) that will hide all other buttons while this movie clip is playing. But, when I click to close it, I can't figure out a way to make them reappear. I tried putting visible = true again for all of them, but no dice.
The actionscript for it is right below.
I'm not sure if there's anything I can do to make it modal in AS3 or something like that. Or should I go ahead and set it up in a parent/child kind of way (not too well-versed in that regard.
All the buttons to click on are in the same layer and I'm not sure if making them different layers in Flash would make any difference.
stop();
ring1926.movie1926.visible = false;
// add a rollover to make the inside movieclip appear
[Code].....
I have an array that holds a list of items. In a movie clip, I have that same list as the frame labels. I'm using a for loop to iterate through the array and then assigning event listeners so that when you roll over an icon, it sends the movie clip to the right frame label (matching the item in the array).
However, the code I have now only returns the first match and not any of the others. Here's my code:
Code:
for (var j:uint = 0; j<interiorCallouts.length; j++) {
featureTextArray[j].text = interiorCallouts[j];
featureArray.length = interiorCallouts.length;
[Code]....
See the showCallout function. I'm using the interiorCallouts array to match the frame label in the callouts_mc, but I'm only getting the first match. None of the others.
In flash CS5 I want to go back to the main time line, from inside a movie clip button, so when i click the the movie clip it goes to another frame on the main time line..
View 5 RepliesI am using Flash CS5 on an iMAC, running OSX 10.6. I created a file that uses a Combobox on the first frame, and I would like to connect the buttons to go to and stop/play on multiple labels.
View 2 Repliesi have movie clip named serviceMenu which is instance of menuAll in Scene 1
scene 1 have 8 labels:
serv1 - serv2 - serv3 - serv4 - serv5 - serv6 - serv7 - serv8
inside serviceMenu i have 8 buttons
when i doubleclick serviceMenu it take me inside
menuAll which have 3 layers
1- 1 keyframe actions
2-1 keyframe for the button
here is the code for one of the buttons
servSix_btn.addEventListener(MouseEvent.CLICK, goServ6);
function goServ6(event:MouseEvent):void
{
serviceMenu.gotoAndStop("serv6", "Scene 1");
trace("button Clicked")
}
and here is the error: "1120: Access of undefined property serviceMenu."
am trying to target scene 1 labels
here is my issue, so i have a main page with a slideOut movieclip which basically is a movie clip button and the "over" state sends a tray out of the movie clip with info and anothe rmovie clip button. i cant seem to get that movie clip button to root.gotoAndPlay("frameLabel");i have the actionscript on the same frame as the movie clip i need to act as a button. but it just doesnt seem to react to it.i have tried going to the main timeline and doing
blank_mc.blank2_mc.onRelease = function();
{
_root.gotoAndPlay("frameLabel");
[code]....
it isn't such a big problem bur for a beginner like me it is.I have a movie clip called "Lion_beginning_mc", inside of it I have 3 Key Frames and Inside each and one of them I have different shapes.For example:Key Frame number 01 - DogKey Frame number 02 - CatKey Frame number 03 - MouseI want to move this movie clip "Lion Beginning_mc" form Key frame number 1 to Key frame number 20.I want the Dog,Cat and a mouse to change between each other only once while moving from Key Frame number 1 to 20.And then when the movie clip "Lion Beginning_mc" reaches his goal another movie clip or a frame (with a shape) will start.
View 5 RepliesScene1->MovieClip1->Image1(as a button)Scene1->MovieClip2->MovieClip3->MovieClip4->frame1Now I want to call frame1 from Img1 have a parent Scene1 common.How can I do this.I have tried
on(release){
_parent.MovieClip2.MovieClip3.MovieClip4.gotoAndPl ay("frame1");
}
[code].....
I am trying to place buttons inside a movie clip to control the timeline of the same movie clip. This does not seam to work like buttons on the main timeline. When I play the movie the cursor does not turn into a hand and the rolloever affects only sort of work. I have read about controling the movie clip with buttons on the main timeline, but I need one of the buttons to change halfway through the movieclip. I want to be able to jump to interior shots while in the exterior section and vice versa. It would seem that button would work the same way inside a movie clip as they do on the main timeline, but that does not appear to be the case. I am using CS3. Action scrip 2.0 is selected, but I could change it to 3.0 if it would make a difference.
View 6 Replies