I'm trying to loop back to the first frame of a movie clip using buttons. The movie clip is on a single frame on the main timeline. The buttons control the animation within the movie clip. The movie clip has three frames, and when I get to the last frame, I don't know how to write the code to go back to frame one, on the forth press of the next button. The code I'm using is below:
[Code]...
I've got a movieclip acting as a button. Code on the button itself handles roll-over/-out states, and I define an onRelease function in the main timeline as follows:
[Code]...
This code takes the movie back to the first frame and works on the third frame. For some reason, though, the same code on the fifth frame has no effect. The button doesn't do anything. I have tried using the same button, I tried inserting a new keyframe with a new button, renaming the button, etc. and for some reason I just can't get it to work on the fifth frame. If it helps to visualize, I am essentially making a menu. The first frame contains buttons to take you to submenus, located on following slides. This button to go back to the original menu is on each frame with a submenu, but for some reason only works on one of them.
I would like play head of a movie clip to return to a certain frame of that clip so a MC inside it would loop. I now have: stop(); as the action.
View 2 RepliesIn flash CS5 I want to go back to the main time line, from inside a movie clip button, so when i click the the movie clip it goes to another frame on the main time line..
View 5 RepliesI have a MovieClip with two buttons inside of it (bottom portion) When I mouse over the MovieClip - it rises up, to revewl the buttons. My problem is, when I mouse over the buttons, the movie clip drops back down. The buttons don't have any actions upplied to them... It acts as though buttons were standing between the cursor and the movie clip... The idea is to hower over the movie clip > reveal the buttons > either move mouse away or click on one of the buttons. However, the movie clip closes when I touch either one of the buttons. Below is the code and thnks a bunch ahead of time:
[Code]....
ActionScript Code:
for(i = 1; i <= 27; i++){
this["build" + i].onPress = function(){
buildMenu._x += 380;
}
}
I have 27 buttons on a menu generated by a for loop. When the button is clicked it moves the menu +380 pixels. Now to shorten my code I moved the buttons inside the menu movieclip. Intance name: "buildMenu"
This means I only have to move the menu rather than the menu plus each individual button.
The code below works fine but I don't want to have to write this 27 times as each button will be calling much more than just "buildMenu._x += 380;"
ActionScript Code:
buildMenu.build1.onPress = function(){
buildMenu._x += 380;
[Code].....
I'm stuck on combing the this["build" + i]" with the menu movieclip instance "buildMenu"
This is an if stament on a frame on the root. I want to loop Carrera(a lenghthy movieclip) from frame 2 back to frame 1. (For testing purposes) This is the code:
[Code]...
have 1 button inbeded in a movie clip named mcintroclp that is on frame 1 of my main timeline, Frame 2 is labeled port_btn on the main timeline. In the timeline of the movie clip mcintroclp I've put the code:
stop();
function buttonClick(event:MouseEvent):void
{
[code]......
I'm trying to write an if then statement that will loop back to frame 1 once the next frame it hits is higher than 5. For some reason it doesn't work and I could easily go to frame six and add a go to and play but, I'd like to learn what's wrong instead of doing it the easy way.
[Code]...
im trying to navigate through a movie clip and stop at frame labels using individual buttons to call to individual labels while being able to see the on the way to the frame(for a blurred effect).my goal is to jump from point A to point F to point Z and see all the frames in between and visa versa.
View 1 RepliesI've got an interesting issue with the actionscript in my file. I've created a slide show with 27 labeled frames - they've been labeled "frame 1", "frame 2", "frame 3", etc... My issue is the first time everything works perfectly, if you hit next or previous. It goes to the correct frame. On the last frame if you click next it should take you back to "frame 1" and basically loop through all the frames again if you keep pressing next. The problem is it goes back to frame 1, and then next doesn't work on this frame. I don't understand what's going on considering the first time around - these frames work perfectly.Here's the code on frame 1:
Actionscript Code:[code]........
I've got an interesting issue with the actionscript in my file. I've created a slide show with 27 labeled frames - they've been labeled "frame 1", "frame 2", "frame 3", etc... My issue is the first time everything works perfectly, if you hit next or previous. It goes to the correct frame. On the last frame if you click next it should take you back to "frame 1" and basically loop through all the frames again if you keep pressing next. The problem is it goes back to frame 1, and then next doesn't work on this frame. I don't understand what's going on considering the first time around - these frames work perfectly.
Here's the code on frame 1:
ActionScript Code:
stop();
/*Navigation Code */
nextbtn.addEventListener(MouseEvent.MOUSE_DOWN, buttonNextHandler);
[Code].....
I've got an intro for a movie,and a single button appears around frame 58,and I've tried giving it a function so it will skip to fram 478 and play the whole movie from there on:
PlayCompl_btn.onRelease = function() {
gotoAndPlay(478);
}
but it keeps saying "statement must appear within handler" and I've got the same problem when the movie reaches frame 477 I want it to go back to frame 58 and play from there so it would loop all until the button is clicked:
PlayCompl_btn.onEnterFrame = function() {
gotoAndPlay(58);
};
here is my issue, so i have a main page with a slideOut movieclip which basically is a movie clip button and the "over" state sends a tray out of the movie clip with info and anothe rmovie clip button. i cant seem to get that movie clip button to root.gotoAndPlay("frameLabel");i have the actionscript on the same frame as the movie clip i need to act as a button. but it just doesnt seem to react to it.i have tried going to the main timeline and doing
blank_mc.blank2_mc.onRelease = function();
{
_root.gotoAndPlay("frameLabel");
[code]....
Basically, I have a flash app with various frames, each frame contains a "help" button, which when clicked takes the user to one seperate frame with various informative instructions on it. The help button is like a universal tool incase the users need help.
Now, no matter what frame the user is on, if they click the help button, sure enough, it takes them to the "help" frame. The big problem I have, is that I cannot fathom a way to make the users RETURN to the exact frame they came from.
For instance, the user is viewing a frame in the app called "Question 2", they get stuck, they click on the "help" button, it takes them to the "help" page. After veiwing the instructions, they need to return to the question 2 frame, possibly by clicking a "back" button of some description. Likewise if they were on a frame called "Question 3" - they need to return to this frame if they click the help button.
In a nutshell, I need to create a button that takes the user back to the previous frame from the "help" frame, like a dynamic link back or something.
I'm trying to make my movie loop, but when I enter the following code in the last movie clip (layer) of my swf movie, it only loops back to the first frame of that movie clip (layer).
gotoAnd Play (1);
When I do the code above it doesn't loop back to the beginning of my movie.
What is the proper code for making it loop to the very beginning?
I tried to do the following code, but I got an error message. I'm not sure of the proper syntax for the code.
tli_logo.gotoAndPlay(1);
tli_logo is the name of the very first movie clip (layer) of the swf movie.
I believe that making the last frame of the last movie clip (layer) loop back to the first frame of the first movie clip (layer) will be what I am trying to achieve. Is this the proper way to go about this, or there a better and more proper way to do this. If there is, then please send me the proper syntax AS cs3 code to do it.
I want to loop through a movie clip and assign a function to each of the clip's child movieclips. when i do a for...in loop and then do a typeof() trace I get "string" and obviously it won't let me assign lets say 'onRollOver' functions to the children.
View 6 RepliesI am importing a movie clip as a symbol from a SWF using Embed to a AS3 program and, after attaching the movie clip to the stage, the movie clip keeps repeating. Before you ask I have indeed creating a script layer and put a "stop()" on the last frame. In fact the swf containing the symbol works perfectly fine when executed on its own or in Flashdevelop (my choosen IDE). Its only when imported does the clip keep repeating.Here is the code:
Code:
package {
import flash.display.*;
[code]......
it isn't such a big problem bur for a beginner like me it is.I have a movie clip called "Lion_beginning_mc", inside of it I have 3 Key Frames and Inside each and one of them I have different shapes.For example:Key Frame number 01 - DogKey Frame number 02 - CatKey Frame number 03 - MouseI want to move this movie clip "Lion Beginning_mc" form Key frame number 1 to Key frame number 20.I want the Dog,Cat and a mouse to change between each other only once while moving from Key Frame number 1 to 20.And then when the movie clip "Lion Beginning_mc" reaches his goal another movie clip or a frame (with a shape) will start.
View 5 RepliesScene1->MovieClip1->Image1(as a button)Scene1->MovieClip2->MovieClip3->MovieClip4->frame1Now I want to call frame1 from Img1 have a parent Scene1 common.How can I do this.I have tried
on(release){
_parent.MovieClip2.MovieClip3.MovieClip4.gotoAndPl ay("frame1");
}
[code].....
I am trying to place buttons inside a movie clip to control the timeline of the same movie clip. This does not seam to work like buttons on the main timeline. When I play the movie the cursor does not turn into a hand and the rolloever affects only sort of work. I have read about controling the movie clip with buttons on the main timeline, but I need one of the buttons to change halfway through the movieclip. I want to be able to jump to interior shots while in the exterior section and vice versa. It would seem that button would work the same way inside a movie clip as they do on the main timeline, but that does not appear to be the case. I am using CS3. Action scrip 2.0 is selected, but I could change it to 3.0 if it would make a difference.
View 6 RepliesIf there is a movie clip over another one i want the first one to go back, but I don't know how to do it when the project is running.
View 1 RepliesI've got a problem with the Properties panel for Movie Clips, Graphics and Buttons. I clicked 'Advanced Options' at some point to see what they were, and now I have no idea how to get back to basic options like Alpha, Tint, etc.
View 3 RepliesI have a movie clip with 15 frames. Each frame has buttons on it (mc's)... I was going to put the actions on the main timeline/stage and navigate within the MC from the main timeline. Is that possible? I can get the buttons on the first frame of the MC to work, but I can't seem to figure out how to target/make the buttons on the other frames work? I was thinking I could identify the path of the MC with the frame labels, but that doesn't seem to work. like: _root.RMChanger.(frame label).buttonOnFrame = function
I have to move a text box in and out over the MC backgrounds on the main stage... which is why I was thinking to do it this way? I've been switching back and forth bwtween AS2.0 and 3.0
I am creating a navigation bar in Flash (which will then be used in Dreamweaver). When you mouse over each topic in menu (ex. Products), i want it play a movie clip (so it shoots out a sub-menu underneath). so far so good, but the only thing is, the sub-menu won't stay open in order for me to click on buttons in it. For each button, I assigned it the Behavior to go to a url. Also, I tested the buttons within the mc and they don't seem to direct me to url. do you think maybe it's because it's nested within the movie clip?? Is there an easier way to go about this?
[Code]....
Just finally making the transition from AS2 to AS3.All i need to do at this point is make two buttons which will control the movie to goto next frame and previous frame. I have gotten how to make the buttons go to a specified frame number and also a button to go to a specified external url but no success in making a simple next/previous pair of buttons.
stop();
but1.addEventListener(
MouseEvent.MOUSE_UP,
[code]....
I made two movie clips that follows the mouse but I want to put constraints on them, they should follow the mouse until the mouse reaches a certain distance and then the movie clip should pop back to its original x and y position.
Code:
private function init():void
{
addChild(backgrnd);
[code]....
My project has a center-registered movie clip with a z-axis setting of 850 that I need to keep centered on the stage at all times, including when the stage is re-sized.Code like this for centering 2D objects doesn't seem to work:[code]My guess is that I need to convert the movie clip back into 2D space somehow, center it using the code above and then change the z-axis back to 850.
View 4 RepliesThe Library allows Movie Clips to be named with spaces on the end.This causes problems when exporting library items with linkages.When exporting you don't get an error, but the item does not show up in the build.Is there a reason you allow spaces on the back of Movie Clip names?
View 1 RepliesI'm getting no errors on this, Go (comeback) is my movie clip which should turn up when the mouse leaves the stage area and leave when the mouse enters the stage. I know it's probably my removeChild command
ActionScript Code:
import flash.events.MouseEvent;
import flash.events.Event;[code]....
