This is an if stament on a frame on the root. I want to loop Carrera(a lenghthy movieclip) from frame 2 back to frame 1. (For testing purposes) This is the code:
[Code]...
I'm trying to write an if then statement that will loop back to frame 1 once the next frame it hits is higher than 5. For some reason it doesn't work and I could easily go to frame six and add a go to and play but, I'd like to learn what's wrong instead of doing it the easy way.
[Code]...
I've got an interesting issue with the actionscript in my file. I've created a slide show with 27 labeled frames - they've been labeled "frame 1", "frame 2", "frame 3", etc... My issue is the first time everything works perfectly, if you hit next or previous. It goes to the correct frame. On the last frame if you click next it should take you back to "frame 1" and basically loop through all the frames again if you keep pressing next. The problem is it goes back to frame 1, and then next doesn't work on this frame. I don't understand what's going on considering the first time around - these frames work perfectly.Here's the code on frame 1:
Actionscript Code:[code]........
I've got an interesting issue with the actionscript in my file. I've created a slide show with 27 labeled frames - they've been labeled "frame 1", "frame 2", "frame 3", etc... My issue is the first time everything works perfectly, if you hit next or previous. It goes to the correct frame. On the last frame if you click next it should take you back to "frame 1" and basically loop through all the frames again if you keep pressing next. The problem is it goes back to frame 1, and then next doesn't work on this frame. I don't understand what's going on considering the first time around - these frames work perfectly.
Here's the code on frame 1:
ActionScript Code:
stop();
/*Navigation Code */
nextbtn.addEventListener(MouseEvent.MOUSE_DOWN, buttonNextHandler);
[Code].....
I'm trying to loop back to the first frame of a movie clip using buttons. The movie clip is on a single frame on the main timeline. The buttons control the animation within the movie clip. The movie clip has three frames, and when I get to the last frame, I don't know how to write the code to go back to frame one, on the forth press of the next button. The code I'm using is below:
[Code]...
I have a function with some if and else...if statements in a particular frame. In this assessment program, the user goes to other frames, then evaluates several variables at the end. If the user gets more than 3 wrong, the user goes back to the scenarios that were missed (i.e., a particular frame label). When I have tested this program, I can get back to the right frame/scenario, but a particular button's function won't work. Is there something where I need to "reset" this function the second time the user goes through it because it remembers what was done the first time?
View 1 RepliesI've got an intro for a movie,and a single button appears around frame 58,and I've tried giving it a function so it will skip to fram 478 and play the whole movie from there on:
PlayCompl_btn.onRelease = function() {
gotoAndPlay(478);
}
but it keeps saying "statement must appear within handler" and I've got the same problem when the movie reaches frame 477 I want it to go back to frame 58 and play from there so it would loop all until the button is clicked:
PlayCompl_btn.onEnterFrame = function() {
gotoAndPlay(58);
};
I am trying to use this if statement with a frame label instead of a frame number. I believe that _currentframe is looking for a number only. Is there a different command that looks at frame labels instead of frame numbers?
View 1 RepliesI am trying to use this if statement with a frame label instead of a frame number. I believe that _currentframe is looking for a number only. Is there a different command that looks at frame labels instead of frame numbers?
View 1 RepliesI have created an interactivity to simulate a product. To do this my project has multiple frames. Each frame contains an individual movie clip. The clips each contain buttons that change the display and go to and stop on specific frames based on which button was pressed. My problem is, after the interaction a movie clip may have been stopped on say frame 12, the next time the frame containing the movieclip is opened on the main timeline I need the movieclip to open on frame 12 . However, the movie clip opens back up at frame 1 each time not saving the interaction.
View 10 RepliesI hit enter,it only plays next frame and then goes back to the frame where it stopped. What I've tried was something like:
stop();
Key.addListener(Key.ENTER)
if (Key.isDown.ENTER){
play();
};
I want it to play all the way to the end,not just go back.
I've got a movieclip acting as a button. Code on the button itself handles roll-over/-out states, and I define an onRelease function in the main timeline as follows:
[Code]...
This code takes the movie back to the first frame and works on the third frame. For some reason, though, the same code on the fifth frame has no effect. The button doesn't do anything. I have tried using the same button, I tried inserting a new keyframe with a new button, renaming the button, etc. and for some reason I just can't get it to work on the fifth frame. If it helps to visualize, I am essentially making a menu. The first frame contains buttons to take you to submenus, located on following slides. This button to go back to the original menu is on each frame with a submenu, but for some reason only works on one of them.
how do you do the following
A movieclip is playing...
When it reaches frame 20, it goes back and plays at frame 5. Then it keeps doing this. To me this is harder than it looks
I have a timeline that has some label frames at the very end of the timeline. During the timeline a user will hit a button on a frame and will jump to one of the label frames. On the label frame is another button that when clicked - returns the user to the previous frame. How do I make the movie return to frame 1 - without a button - but before it reaches the label frames? In other words, by simply reaching a certain frame in the movie, I want the timeline to go back to frame 1.
View 3 RepliesI'm using TweenMax to play a movieclip in reverse with a CLICK:
Code:
import gs.TweenMax;
mAboutGlow.addEventListener(MouseEvent.CLICK, mClickAbout);
function mClickAbout(e:MouseEvent):void {
TweenMax.to(mBoxContact, 1, {frame:1});
}
How would I use MOTION_FINISH (or equivalent) to trigger a gotoAndStop after the movieclip has reverted back to frame 1?
Using MX 2004. I would like to play the entire movie twice, then start playing a third time until frame 30 and stop.
View 1 RepliesI'm having trouble with something that should be incredibly basic, yet i have no idea how to solve my problem.
[Code]...
it shows x as being 3 when you hit the button but it reverts back right away, so it looks like gotoAndPlay(2) is still playing frame
1. how do i stop it from reseting my variables?
I have an animation of a dog running across the stage and a movieclip called "legs" which is the legs moving. I want to loop the dogs legs for a certain amount of frames and then make it stop on a certain frame within that same nested "legs" movie clip.how to do this and where the actionscript should go?
View 3 RepliesI'm not too acquainted with using loops. If you use a loop in one frame and then leave that frame, does the loop continue? This might be a strange question but I'm having some issues and I think they involve the use of a loop.
View 1 RepliesI have a Flash website with 3 interfaces( 3 frames with movie clips inside). they have a button that goes to different loaded .html page(text). But once the back button is pushed on the web browser, it always goes back to the first frame instead of the actual last page, which might have been frame 2 or 3.
View 1 Replieshow I access variables in a frame on the stage with code from a frame within a movieclip?(basically passing variables from a stage frame to a movieclip frame)
View 4 Repliesi have a movie clip with a dynamic text field being animated...i have a text file with this in it
&textline1=time
&textline2=place
&textline3=year
&textline4=month
now how do i make the movie clip to first go from frame 1 to 10( last frame in teh movieclip) with the text time and then when the movie clip starts again it should say place and so on and so forth.. depending on how many textline variables i define in the text file?
If I removeChild frame animated Movieclip, will it automatically stop running the frames inside it? Actually without calling mc.stop();
View 2 RepliesI'd like my Flash site to be bi-lingual. What I have currently is a Flash movie with an empty Movie Clip which then allows users to go from movie to movie. The movies are all small movieClips that are loaded into the empty movieclip on demand. There is some video and text in each of the 30 movieClips.
Here is sample of code that i'm using to call up next MovieClip.
[Code]...
My solution for the bilingual version is to create a separate frame with the French version + video and then when user presses the French button they are directed to that frame. This way I could easily create the French text within the one movie. however i don't know the Actionscript code to call up a movieClip to play from frame 10, and not frame 1.
i'd like to control MovieClip timeline witch contain several DisplayObject (like Sprite, Button, ...) these DisplayObject have Motion (AnimatorFactory). How can i do seek frame-by-frame the MovieClip Timeline and use the currentFrame to control all Motion child.
[Code]....
I was having trouble even knowing quite what to search for so I figured asking a question in a forum would be the best way to go. Currently I am making an application where I have multiple movieclips of equal duration on multiple frames. For example, movieclip_1 is on frame 1 and is 40 frames long. There is currently a scrub bar that scrubs through the 40 frames of movieclip_1. On frame 1 of the Scene there are also buttons with the actions to gotoAndStop on frame 2, frame 3, and frame 4. Frame 2 contains movieclip_2, frame 3 contains movieclip_3, and so on. The functionality of this is that it shows medical conditions progressing from different angles and when a button is clicked the display shows a close up of just that one angle. As expected, without any actions on the movieclips navigating from one frame to the next brings up the proper new movieclip but they always begin at frame 1. What I would like to be able to do is somehow have my movieclips know what frame they are on so when a button is clicked the application would go to that frame and open that movie clip to the same frame as the previous one that was just navigated from.
View 3 RepliesI got a MovieClip filled with a lot of others clips... When I change de X or Y value of this first MovieClip the frame rate slows down for during 1 frame. For exemple... I created a counter that returns around 30 mseconds every frame, but when I do this X or Y change the return is around 400 mseconds... When I try to fill the first MovieClip with less information it goes faster, about 100+-200 mseconds...
View 6 RepliesWhen you click a button I want my flash to go to the frame label where the movie clip is located, and then play a certain frame of that movie clip.
View 5 Replies1. I make a simple movie (call it movieClip) first frame has stop(); action, second frame has label playMovie, last frame has action gotoAndPlay(2); (so that movie not stop anymore2. Now I place movieClip on stage3. Question... what is code to make movieClip play frame label playMovie?
I already try to put many different type action in frame one of stage
this.movieClip.gotoAndPlay("2"); //NOT WORK
this.movieClip.gotoAndPlay(2); //NOT WORK
[code].....
I have the following which works fine just out side of the loop statement:
loadMovie("icons/test.jpg", "pIcon0.Icon");
But inside the loop statement no image shows up.
I need it in the loop statement because eventually the code will call the jpgs out of an array based on the loop variable. And put them in a movieclip number by the variable also.
