ActionScript 2.0 :: Make A Simple Movie (call It MovieClip) First Frame Has Stop(); Action, Second Frame Has Label PlayMovie?
Nov 6, 2006
1. I make a simple movie (call it movieClip) first frame has stop(); action, second frame has label playMovie, last frame has action gotoAndPlay(2); (so that movie not stop anymore2. Now I place movieClip on stage3. Question... what is code to make movieClip play frame label playMovie?
I already try to put many different type action in frame one of stage
this.movieClip.gotoAndPlay("2"); //NOT WORK
this.movieClip.gotoAndPlay(2); //NOT WORK
[code].....
View 7 Replies
Similar Posts:
Oct 10, 2009
I have three buttons, btn_1,btn_2,btn_3, and two movie clips, image_1,image_2. The names listed btn_1,btn_2,btn_3, image_1,image_2. are all instance names. All buttons and movie clips are on their own layer in a single frame on the main time line. the movie clips have a stop action on the first and last frame, with a frame label, on the first frame in the sub time line. For image_1 the frame label is image_1_1 and for image_2 the frame label is image_2_1.
I would like btn_1 and btn_2 to control the movie clips, image_1,image_2. Either button should be able to close the other buttons movie clip and play it's own movie clip. Also i am trying to make the movie clips themselves have the ability to be closed by clicking on the movie clip image area that is playing. Both movie clips when not playing hide behind the appropriate button with an alfa of 0.
When playing they expand to the middle of the window and are at 100% alfa, using a tween. The third button, btn_3 should only be visible when one or the other movie clisp are playing. btn_3 dose nothing else but this for now. As of now, my movies continuously loop and btn_3 is always visible. I can't seem to figure this out. my code for this action is:
[Code]...
View 1 Replies
Jun 22, 2006
I'm trying to goto a frame label from within one movie clip, into another movie clip.For example, the structure is like this:MovieClip called 'allButtons'inside this clip, there are three movie clips with buttons in them, called 'buttonOne, buttonTwo, buttonThree'.Now, say I'm inside the movieclip 'buttonOne', which is inside the 'allButtons' clip. I want to goto a frame label within 'buttonTwo' called 'buttontwo'. How do I do this
on (release) {
buttonTwo.gotoAndPlay("buttontwo");
}
[code].....
View 3 Replies
Mar 26, 2004
i have a movie clip with a dynamic text field being animated...i have a text file with this in it
&textline1=time
&textline2=place
&textline3=year
&textline4=month
now how do i make the movie clip to first go from frame 1 to 10( last frame in teh movieclip) with the text time and then when the movie clip starts again it should say place and so on and so forth.. depending on how many textline variables i define in the text file?
View 5 Replies
Sep 27, 2011
I'm new to actions script. I creating a presentation in which I'm loading external FLV movie files. I have a Navigation menu to go to the different chapters (every chapter is a FLV movie File)This is what I need, when a FLV movie finish I need some action in the frame to take me to next frame where I have the next FLV chapter.if is any help I upload a sample FLA with some FLV for reference.
View 9 Replies
Sep 27, 2011
I creating a presentation in which I'm loading external FLV movie files. I have a Navigation menu to go to the different chapters (every chapter is a FLV movie File) what I need? = when a FLV movie finish I need some action in the frame to take me to next frame where I have the next FLV chapter.I upload a sample FLA with some FLV for reference.
View 4 Replies
Apr 21, 2010
It is my first time using AS3.The way that is set up us I have a "Main MOvie Clip" and inside the main movie clip I have another movie clip which is the MainMenu.Inside the MainMenu are buttons. The frame label I wanted to go to in outside of the MainMenu but Inside of the MainMovieClip.I am doing a small project that involves gotoAndPlay("frame label")In the action layer at the end of the timeline of the MainMenu Moviclip Here is my code;[code]
View 2 Replies
Nov 21, 2007
I have my flash on multiple scenes, and would like to play an animation when clicking on the navigation button before switching to a different scene.
I'm halfway to accomplishing this.
Here is what i used
Code:
_root.gotoAndPlay("changepage1");
_root.onEnterFrame=function(){
if(this._currentframe=="changepage2"){
[Code]....
The above code is on a blank keyframe. Changepage1 is the start of the animation and Changepage2 is the end of the animation.
Upon clicking the navigation button it plays the above scenes.
However it doesn't change scenes to scene "Home2".
View 1 Replies
Mar 22, 2007
I designed a navigation menu that has 4 buttons. When you rollOver btn1 it goes to a nested movie clip and plays the frame label "a1" which changes its color. On rollOut it plays the "a2" which restores it to its original color. Very easy so far and common. onRelease the button is instructed to stay a a1 to indicate its on.Here is the twist. When you roll over btn1 part of the animation covers up the other buttons. Same thing is you roll on btn2 for example, it colors the buttons accordingly. So I started off by creating a variable and setting it to 0. Then I built my rollOver, rollOut, & onRelease code for each button and said if the variable is not != to whatever number then play the frame label using that logic but it has failed to fully work. The other button even though its covered up with a different color still works so it just makes a sort of glitch.[code]
View 1 Replies
Mar 8, 2005
I'd like my Flash site to be bi-lingual. What I have currently is a Flash movie with an empty Movie Clip which then allows users to go from movie to movie. The movies are all small movieClips that are loaded into the empty movieclip on demand. There is some video and text in each of the 30 movieClips.
Here is sample of code that i'm using to call up next MovieClip.
[Code]...
My solution for the bilingual version is to create a separate frame with the French version + video and then when user presses the French button they are directed to that frame. This way I could easily create the French text within the one movie. however i don't know the Actionscript code to call up a movieClip to play from frame 10, and not frame 1.
View 3 Replies
Sep 14, 2010
If I removeChild frame animated Movieclip, will it automatically stop running the frames inside it? Actually without calling mc.stop();
View 2 Replies
Dec 28, 2004
im trying to call a frame label in a mc in scene 2 is there a such thing as...
on(release) {
_thisScene.mymc.gotoAndStop("framelabel");
}
this scene?
View 2 Replies
Aug 18, 2011
i created a two layer in time line in one layer there is a movieclip called mc1. In the same layer in 15th frame i have another movie clip mc2. Inside the movieclip mc2 i created another movie clip at frame10 now if i clik the the mc1 on first frame The movie clip should goto and stop at tenth frame
View 4 Replies
Jun 30, 2011
i'm very new at flash and finally ended all the work i wanted to do here. now i just need to had the actions so it will run properly. basically i just need it to stop in each frame and run the animation of the movie clip on that frame. if it's i can put the project here so you can see what and were i need to had the actions.
View 1 Replies
Apr 8, 2010
I have four movie clips (.f4v) in 4 frames in a movie with watch buttons.. This movie has them been imported into a main movie container that has next and previous buttons. However if i play a movie then hit next frame, the movie continues to play in the background. The code below shows one of the actionscripts for a movie clip and then the main actionscript in the main movie.[code]...
View 1 Replies
Aug 1, 2011
I want my MovieClip to play from frame 5 to frame 30 and then stop. How can I do this?
View 5 Replies
Mar 16, 2009
I'm having a problem trying to call an specific label or frame in a secondary MC.
-There is a main time line (120 frames) with an Intro animation stop in frame 103.
-There is 2 buttons in frame 103 (b1,b2). On release this buttons play 104 and stop in the last frame of the main time line (120).
-In the frame 120 these 2 buttons fade and an MC called navmenu and an empty mc (to load external flash) appear
-MC navmenu is the main menu with 6 frames, one for each button.
I'm trying that when I click on b1, it play 104 go to the end of the main time line, and call frame 3 on navmenu MC, plus load movie on empty MC.[code]...
View 6 Replies
Oct 2, 2009
I have a button on my main timeline that calls an external swf file into an empty container movie. How do I load external swf file and play on a particular frame label?
View 6 Replies
Jun 8, 2009
Frame 1 has an flv that it plays once and stops, here's the actions I have on that frame:stop();stopAllSounds();What would I add to make the flv loop or replay when it finishes? (I have buttons and more flv's on other frames, so I want to have this stop on frame 1 unless someone clicks a button to go to another frame.)
View 5 Replies
Nov 22, 2010
In one part of the game Ive got some "enemies" constantly dropping from the sky, and a big cloud.mc next to the enemies that move when you press a button to block off the "enemies" from hitting the character.
I was thinking it could be possible for the enemies to have a loop from frame 1 to 10 (as long as it takes to drop from the sky) that repeats itself allthrough the game until... somebody hits the button with coding telling the enemy mc to go to frame 11 where a stop(); demand has been put in.I'm having inserting a stop action on frame eleven is that the enemies are only dropping once..
View 6 Replies
Oct 5, 2009
Just finally making the transition from AS2 to AS3.All i need to do at this point is make two buttons which will control the movie to goto next frame and previous frame. I have gotten how to make the buttons go to a specified frame number and also a button to go to a specified external url but no success in making a simple next/previous pair of buttons.
stop();
but1.addEventListener(
MouseEvent.MOUSE_UP,
[code]....
View 14 Replies
Apr 21, 2009
I have created a movie clip button but am stuck with the actionscript. I have created the rollover and rollout for this movie clip button but i want it to do 2 things after this i want it to go and stop on the first frame of a movieclip which has my content on it called portfoliogallery_mc (which is also the same instance name for it) when you then click the button i want it to go and play frame 11 of that movie clip portfolio gallery_mc. Here is my current actionscript i HAVE Flash 8 on my comp that i am currently using. Please note my actions are on a layer called actions and not on the movieclip button itself. nxtimagetwo_mc (is the movie clip button/instance of mc)
[Code]...
View 5 Replies
Mar 9, 2012
im working on a maths style jigsaw, and ive come across a problem of sorts, ive set random1_txt.text to 1 and random1_txt.text to 2 for testing, basically i want to randomise two textfields between 1 and 10, and also randomise the sign between either a - or a +
the answer can be computed by flash, now what i need it to do is stop on the frame number of the answer in answer_mc, these frames contain graphics of all numbers 1-20 in alpha format, this is so that the answer is in place, now the user can drag and drop movieclips into the answer box, and receive a correct or incorrect response
im at a loss on how to do this, i havent gotten around to randomising the sign as of yet i need to do more research but the general idea is as above
Code:
var startX:Number; //start of draggable piece
var startY:Number;
random1_txt.text = "1"
[Code].....
View 3 Replies
Jul 21, 2007
I have a movie clip with a stop command on frame 1 and a stop command on frame 20.I'm trying to have two separate buttons that tell the MC (onRollOver) to play forward or to play backwards.
The actionscript on button #1-
PHP Code:
on(rollOver){ gotoAndPlay(_currentframe +1);}
The actionscript on button #2-
[Code]...
View 1 Replies
Jan 9, 2012
I have a FLV video that I need to stop when my flash video reaches a certain frame. I named my video "SMB3video". Using AS3. I don't want something super advanced, just keep it as simple as possible. I tried to create a script which gave me no errors until it reached the frame for the timeline.
Code:
this.addEventListener(Event.ENTER_FRAME,ent_frame);
function ent_frame() {
SMB3video.stop();
}
View 1 Replies
Mar 14, 2009
I have built a couple of sites in Flash, however, I have a problem with a current site I'm working on. My client wants various photos to fade out in a "checkerboard" fashion, which I am doing via its own movie clip and adding in the appropriate area on the main timeline. However, when I add a blank keyframe on the following page to add a new movie clip (with the next set of pictures, the timeline starts playing through the entire website, not recognizing stop actions or frame labels.
[Code]...
View 1 Replies
Jan 25, 2007
I have a MovieClip created, and the second Frame has a label ("tree0001" for any who care). I'm wondering how I can retrieve the name of this label by asking which frame in the movieclip is loaded (which would be frame #2) and then getting that Frame Label.
View 1 Replies
Jul 6, 2007
I am trying to make it go to a certain point on the movieclip thats called. I am not too familiar with creating functions for frame labels.
clipboard_mc.gotoAndStop("frameLabel");
is where I want to add the code but when I code the button below it doesn't go to the frame that I want it to.
Code:
function btnRelease(myBtns:MovieClip, frameLabel:String):Void {
myBtns.onRelease = function() {
clipboardIn();
noBtns();
} clipboard_mc.gotoAndStop(frameLabel);
}
Button Code:
btnRelease(hand, "hand");
View 5 Replies
Jun 11, 2006
is there an action script code that enables the timeline to automatically enter a frame label on entering a certain frame.
View 1 Replies
Aug 30, 2007
I'm trying to get this function to target myClip_mc and movethe frame head to another frame label.
var counter:Number = 1;
//textBeGone
invisible_btn.onRelease = function(){
counter++;
if(counter % 2 = true) {
[code].....
View 2 Replies
