ActionScript 2.0 :: Go To Certain Frame Label In MovieClip
Jul 6, 2007
I am trying to make it go to a certain point on the movieclip thats called. I am not too familiar with creating functions for frame labels.
clipboard_mc.gotoAndStop("frameLabel");
is where I want to add the code but when I code the button below it doesn't go to the frame that I want it to.
1. I make a simple movie (call it movieClip) first frame has stop(); action, second frame has label playMovie, last frame has action gotoAndPlay(2); (so that movie not stop anymore2. Now I place movieClip on stage3. Question... what is code to make movieClip play frame label playMovie?
I already try to put many different type action in frame one of stage this.movieClip.gotoAndPlay("2"); //NOT WORK this.movieClip.gotoAndPlay(2); //NOT WORK
I have a MovieClip created, and the second Frame has a label ("tree0001" for any who care). I'm wondering how I can retrieve the name of this label by asking which frame in the movieclip is loaded (which would be frame #2) and then getting that Frame Label.
I want to play 2 separate labels in a movie clip in any order when clicking a button that lives inside that movie clip.
Here's what I have on the button: on (release) { gotoAndPlay("location_rev"); gotoAndPlay("residences"); }
Currently, the playhead is going to "residences," entirely skipping "location_rev." I've thought of an if statement to ask Flash to play "residences" when arriving at the end of "location_rev," but I'm not entirely sure how to go about that.
Is there any method so that I can find the List of Label in given Loaded MovieClip. I am working on a system that dynamically load SWF from other developers, since these developers has choice, they put some labels in their script. However it is upto them to use any combination of given label, so that, say one developer make labels Inanimation, OutAnimation, Endanimation
While other make OutAnimation,endanimation And third make InAnimation, Endanimation
So when my script load it should read the label on their MC so it can take action accordingly. We are not sure what Frame number they put label, and we cannot change their SWF anyways. The solution I know is I check through their FrameLabels and then take action if XXX frame exists.
I am in a second scene... and am trying to call a frame label in an mc in scene 2 is there a such thing as... on(release) { _thisScene.mymc.gotoAndStop("framelabel"); } this scene?
I'm incorporating Flash for the first in my site [URL] it should a simple navigation but it has had me stuck for a while. I would like users to click any button on the stage (listed or thumbnails) and open a MC, then close the MC, using a close button , then return to Scene One, which is frame labeled "home".
I am able to successfully open and close the Movieclip but I am not directed back Scene One. When the MC closes, the thumbnail buttons are inactive.
Here is some sample code from The last frame of the MC actions.
stop(); closeVogue_btn.addEventListener(MouseEvent.CLICK, onClickVogue); function onClickVogue(event:MouseEvent):void { gotoAndStop("home"); }
I'm trying to control a movie clip called "nosotrosmc" with a frame label inside called "historia" but does not work Code: menu.nosotros.addEventListener(MouseEvent.CLICK, subSeccion); function subSeccion(e:MouseEvent){ trace(""+e.target.name+"boton clicked"); this.nosotrosmc.gotoAndStop("historia"); }
The output window show this: nosotrosboton clicked TypeError: Error #1009: Cannot access a property or method of a null object reference. at HomeSonny_fla::MainTimeline/subSeccion() I need to made a simple navigation, I'm a designer, not a programmer.
there is a movieclip named movie with instance name movie.Inside this movie there is a textbox in frame 1.I want to give properties and methods to that textbox.
Is it possible to change a frame label within a gotoAndStop('label') with the parameters in a function?I'm playing around with updating code as I learn more and more techniques, and at the moment the code is a basic click-a-button to select the object shape, and on press the button disappears:
// Change the object into a circle. circle_btn.addEventListener(MouseEvent.CLICK,function(){changeShape_fun(circle_btn,circle);}); // Change the object into a square. square_btn.addEventListener(MouseEvent.CLICK,function(){changeShape_fun(square_btn,square);});
[code]....
However I can't/don't seem to know how to change a frame label through function parameters, or if what I'm trying to do is even possible.Also to note, while I'm all ears for any more efficient ways of doing what I'm trying to do, I would still like to know how/if you can change frame labels through function parmeters.
nextTX.onRelease = function (){var nextFrameLabelNum:Number = (1+Math.round(thTX._currentframe/27))%10; thTX.gotoAndPlay("next "+nextFrameLabelNum); }[code].....
which works great IF I am moving one image at a time.What I have done now is tween 3 slides to move into a visible mask by pressing next, but when I press previous of course the above doesn't work.It just jumps to the previous three with no tween.I would like to maintain the tween but in reverse.I would like the previous just to undo, in reverse, what the next button just did with the tween?Is there anyway to make this happen with as 2.0?
if its possible, via AS3, to create a frame label in a movieclip on a specific frame.
Obviously I can do it by manually by setting up labels on the timeline within the target movieclip, but I would rather use an array so I can loop through it, creating a label name on a the specific frame each time?
so for example I would end up with: myLabelOne on frame 10 myLabelTwo on frame 25 myLabelThree on frame 115 etc
I am trying to use this if statement with a frame label instead of a frame number. I believe that _currentframe is looking for a number only. Is there a different command that looks at frame labels instead of frame numbers?
is it possible to find the frame number of frame label with AS if a button is rolled over, the timeline jumps to a label - which plays a set of 3D rendered frames to 'raise' and element, once a user rolls out of the 'button' area the button is meant to 'lower' - which can be done by simply playing backwards to the previous label.
I am trying to use this if statement with a frame label instead of a frame number. I believe that _currentframe is looking for a number only. Is there a different command that looks at frame labels instead of frame numbers?
on (press) { _parent._parent.gotoAndPlay(19); }[code]....
it will work? My labeled frame is two parent mc's previous and it doesnt work when I call to it with the label?I would really like to use the label so if I move my keyframes around I dont have to change a lot of code.....
I have three buttons, btn_1,btn_2,btn_3, and two movie clips, image_1,image_2. The names listed btn_1,btn_2,btn_3, image_1,image_2. are all instance names. All buttons and movie clips are on their own layer in a single frame on the main time line. the movie clips have a stop action on the first and last frame, with a frame label, on the first frame in the sub time line. For image_1 the frame label is image_1_1 and for image_2 the frame label is image_2_1.
I would like btn_1 and btn_2 to control the movie clips, image_1,image_2. Either button should be able to close the other buttons movie clip and play it's own movie clip. Also i am trying to make the movie clips themselves have the ability to be closed by clicking on the movie clip image area that is playing. Both movie clips when not playing hide behind the appropriate button with an alfa of 0.
When playing they expand to the middle of the window and are at 100% alfa, using a tween. The third button, btn_3 should only be visible when one or the other movie clisp are playing. btn_3 dose nothing else but this for now. As of now, my movies continuously loop and btn_3 is always visible. I can't seem to figure this out. my code for this action is:
I am making a site and have a component on the stage that is put there dynamicly through AS 2.0. When I F5 or Ctrl F5 it seems that the actionscript is read allover again?Only the script that is situated in the specific label. What if I have script in that label that creates a news reader. I f12 and the news reader is there I jump to another label with the menu. when i jump back to the home label the news reader does not appear on the stage. after a f5 or ctrl f5 it does.Do I have to attach the movieClip in each label to assure a the dynm-movieClip script is on stage for the ctrl f5 issue?
I have a tic-tac-toe game. Where the user would which spot they would want to put their X or O in and then they would go to a random question. That's where my problem starts. How do I get it to go to a random question?[code]This is what I tried using. It works, but it only goes to QuestionOne. I tried putting a comma to seperate the labels, but that just makes it play the whole movie.
Following the common rules, I'd like to put all my as2 code in the first frame of a layer named "code". Then this question occurred: how to implement that "taking some actions when a specified frame(best using "frame label" not "frame index number") entered" in the "code frame" using as2. what i can call to mind is listen the enter frame message of the current MC, but how can i check if the current entered frame is the specified frame?
Iam create small Animation in 10 frames. 1st frame lable name is "start" , last frame label name is "end". Button on click how to get current frame label name.
