ActionScript 3.0 :: SlideShow Navigation Works Until Loop Back To First Frame
May 24, 2010
I've got an interesting issue with the actionscript in my file. I've created a slide show with 27 labeled frames - they've been labeled "frame 1", "frame 2", "frame 3", etc... My issue is the first time everything works perfectly, if you hit next or previous. It goes to the correct frame. On the last frame if you click next it should take you back to "frame 1" and basically loop through all the frames again if you keep pressing next. The problem is it goes back to frame 1, and then next doesn't work on this frame. I don't understand what's going on considering the first time around - these frames work perfectly.
Here's the code on frame 1:
ActionScript Code:
stop();
/*Navigation Code */
nextbtn.addEventListener(MouseEvent.MOUSE_DOWN, buttonNextHandler);
[Code].....
View 1 Replies
Similar Posts:
May 23, 2010
I've got an interesting issue with the actionscript in my file. I've created a slide show with 27 labeled frames - they've been labeled "frame 1", "frame 2", "frame 3", etc... My issue is the first time everything works perfectly, if you hit next or previous. It goes to the correct frame. On the last frame if you click next it should take you back to "frame 1" and basically loop through all the frames again if you keep pressing next. The problem is it goes back to frame 1, and then next doesn't work on this frame. I don't understand what's going on considering the first time around - these frames work perfectly.Here's the code on frame 1:
Actionscript Code:[code]........
View 3 Replies
Jun 21, 2009
I've got a movieclip acting as a button. Code on the button itself handles roll-over/-out states, and I define an onRelease function in the main timeline as follows:
[Code]...
This code takes the movie back to the first frame and works on the third frame. For some reason, though, the same code on the fifth frame has no effect. The button doesn't do anything. I have tried using the same button, I tried inserting a new keyframe with a new button, renaming the button, etc. and for some reason I just can't get it to work on the fifth frame. If it helps to visualize, I am essentially making a menu. The first frame contains buttons to take you to submenus, located on following slides. This button to go back to the original menu is on each frame with a submenu, but for some reason only works on one of them.
View 1 Replies
Apr 17, 2009
I have some dynamic text fields in a frame called ExerciseFrame (which contain different random numbers, texts, ... and other variables.) When I navigate to another frame called helpFrame and back to the exerciseFrame again, all variables and text fields and other random numbers,... are reset. I mean text fields which contained many data in them becomes empty! I do navigation by a button in exerciseFrame with a simple
eventListener( gotoAndStop("helpFrame");
And in helpFrame another button with this code
(gotoAndStop("exerciseFrame");
How can I keep the state the whole exerciseFrame unchanged when navigating away from it and back to it again? version: AS3 - Flash CS4
View 3 Replies
Nov 25, 2011
This is an if stament on a frame on the root. I want to loop Carrera(a lenghthy movieclip) from frame 2 back to frame 1. (For testing purposes) This is the code:
[Code]...
View 3 Replies
Jul 6, 2003
I'm trying to write an if then statement that will loop back to frame 1 once the next frame it hits is higher than 5. For some reason it doesn't work and I could easily go to frame six and add a go to and play but, I'd like to learn what's wrong instead of doing it the easy way.
[Code]...
View 14 Replies
Apr 13, 2011
I'm trying to loop back to the first frame of a movie clip using buttons. The movie clip is on a single frame on the main timeline. The buttons control the animation within the movie clip. The movie clip has three frames, and when I get to the last frame, I don't know how to write the code to go back to frame one, on the forth press of the next button. The code I'm using is below:
[Code]...
View 6 Replies
Apr 10, 2010
I've got an intro for a movie,and a single button appears around frame 58,and I've tried giving it a function so it will skip to fram 478 and play the whole movie from there on:
PlayCompl_btn.onRelease = function() {
gotoAndPlay(478);
}
but it keeps saying "statement must appear within handler" and I've got the same problem when the movie reaches frame 477 I want it to go back to frame 58 and play from there so it would loop all until the button is clicked:
PlayCompl_btn.onEnterFrame = function() {
gotoAndPlay(58);
};
View 9 Replies
Dec 17, 2010
I have tried several navigation scripts and z-index all over the place but no matter what I try the sub-folders of my navigation on my homepage always gets hidden by the slideshow. Can someone tell me how to correct this? If you need to see it go to this site and move your mouse over the 3rd link down (home services) to have the sub-folder come out:
[Code]...
View 5 Replies
Apr 11, 2011
I just missed the Flash Q&A @ Facebook... didn't get an answer to my navigation question: I know how to go from 1.swf (scn.1) to 2.swf (scn.1) and back. (buttons) I don't know how from 1.swf (scn.1) to 2.swf (scn.1) then back to 1.swf (scn.3)
View 5 Replies
Oct 21, 2010
I have a Flash website with 3 interfaces( 3 frames with movie clips inside). they have a button that goes to different loaded .html page(text). But once the back button is pushed on the web browser, it always goes back to the first frame instead of the actual last page, which might have been frame 2 or 3.
View 1 Replies
Mar 18, 2010
I followed a tutorial to build a click-thru photo gallery that is linked to an XML file. The tutorial set up the navigation as being controlled by clicking the images, but I wanted to add some more obvious navigation prompts for viewers on my website. The "next" button was easy to do as I just copied the actions for clicking the images on the main section of the stage, but when it came to building the "previous" button, the code was not working. I want the button to take the audience to the image before the image they are on when clicked.
I've pasted what I have below and highlighted the sections that I have altered. If you could please tell me what I'm doing wrong, that would be great.
[Code]...
View 5 Replies
Feb 11, 2012
adding navigation buttons to my swf slideshow. I have had many views but no comments.
View 3 Replies
Feb 27, 2009
Actionscript 3.0 I've created 5 buttons that are set up to go to different frame labels on a timeline. They work fine individually (when going from one part of the movie to the new area where I have navigation, the first button clicked will work. Any of the 5. But when I try to go to another button in the navigation..nothing. Here's the AS. Am I missing something?
View 1 Replies
Jan 31, 2012
Was hoping to get some advice here. Having trouble with what would seem to be a basic navigational system for an iPad presentation. I have, for this example, 5 pages in my library which I've added into an array.The effect I'm aiming for, when the user swipes to go to the next page, it should:
- Add the next page to stage using addChild (out of view)
- Tween the current page out of view, tween the next page into view
- Remove the old page using removeChild.
The reasoning for this is I will have a large amount of pages with heavy animation and I'm trying to avoid having them all present on stage at once to prevent a drop in FPS.
Here is my code so far. I've tried a few things such as trying to re-set currentPage with the array but have had no luck. Been pulling my hair out for a few hours now!
[Code]...
View 1 Replies
Feb 10, 2010
I'm making an xml slideshow width 2 navigation arrows. I have loaded either the xml and the images. The problem is this: in the first frame i have a movieclip called "foto1" in which i load the first photo and underneath this i have another movieclip called "foto3". I load the two photos and i fade "foto1" to "foto3". after i'm going to the second frame in wich i have "foto3" and underneath this "foto1". I've loaded "foto3" but when the movie go to the second frame "foto3" contains nothing.
View 1 Replies
Jan 30, 2012
basic navigational system for an iPad presentation.I have, for this example, 5 pages in my library which I've added into an array.The effect I'm aiming for, when the user swipes to go to the next page, it should:
- Add the next page to stage using addChild (out of view)
- Tween the current page out of view, tween the next page into view
- Remove the old page using removeChild.
The reasoning for this is I will have a large amount of pages with heavy animation and I'm trying to avoid having them all present on stage at once to prevent a drop in FPS.Here is my code so far. I've tried a few things such as trying to re-set currentPage with the array but have had no luck. Been pulling my hair out for a few hours now!
Code:
import com.greensock.*;
import com.greensock.easing.*;
import com.greensock.plugins.*;[code].....
View 7 Replies
Dec 22, 2010
I have a presentation with two set of buttons.Clicking on the set which is on the Frame (2) Should redirect to the set of buttons Frame (3),(4),(5),(6),(7)As you can see in the image, the (2) gives the order to go to the next (3) and it works.But when it goes from (2) to (5) or (6) or (7) then the second set of buttons don't work anymore.[URL]
View 3 Replies
Nov 29, 2011
I can't use navigation between three videoclips by using next/back buttons. My videoclip instance name are..
chapter1
chapter2
chapter4
View 2 Replies
May 26, 2009
I am doing a slideshow in Flash. With AS 2, I would create frame labels for each slide with a stop action on each one in the timeline and a button underneath the background with the following script:
on (keyPress "<Right>") {
gotoAndPlay("2");
}
The keyboard right arrow (and left arrow) would move the slideshow forward and backward. I had another button for backward.I'm doing one in AS 3 now (dictated to me) and this script isn't working.
View 3 Replies
Oct 27, 2009
What is the easiest way (for Fash novice) to navigate back and forth between the slides of presentation made with Flash Slide Presentation feature. Each slide contains animation and plays well the first time but when if I want to back to a slide, it would only show the last frame of that slidI tried many things including making buttons for back and forth and managed to make buttons that fade when you pan over them (big accomplishment:) but can't get them to actually do stuff for me, like go forward and backward. I tried to assign to the button's frame "UP" thee following script but it doesn't work:
onKeyDown = function() {
if (Key.getCode() == Key.LEFT)
gotoAndPlay (_currentframe-1)
[code].....
View 24 Replies
Oct 13, 2010
i have a photo gallery up on page [URL].. that is giving me the blues as far as navigation. i can't go back to images i've already viewed.
View 1 Replies
Jan 6, 2010
I am All Programmer when it comes to anything including flash. I got into making games not to long ago and some people use frames to navigate from the main menu to the game screen and so on (which I have no idea how to do). and some people encapsulate the game inside of a class and call it from the document class and add and remove it when please
View 4 Replies
Nov 8, 2009
I want arrows for next and back
if ( == "pic1") {
gotoAndPlay("pic2");
if what equals pic1
It's not currentFrame
View 1 Replies
Mar 24, 2012
i am using google maps and when i have put a button on the fourm to navigate home i am getting a error #1009 here my code hope someone can spot my error
Code:
import com.google.maps.LatLng;
import com.google.maps.Map;
[code]....
View 1 Replies
Oct 18, 2011
I started a tutorial about creating a flash slideshow. This is the as2 code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
var myShowXML = new XML();
myShowXML.ignoreWhite = true;
myShowXML.load("slideshow.xml");
myShowXML.onLoad = function() {
[Code] .....
The link I got these functions is this: [URL]. How can I adjust these functions to my slideshow?
View 4 Replies
Mar 20, 2010
I hit enter,it only plays next frame and then goes back to the frame where it stopped. What I've tried was something like:
stop();
Key.addListener(Key.ENTER)
if (Key.isDown.ENTER){
play();
};
I want it to play all the way to the end,not just go back.
View 1 Replies
Mar 5, 2010
I have a flash gallery in side my movie I have a next button and a prev button that works just fine. The issue I am having is when you click next and then go back the getURL function no longer works. It might be easier to view the issue. here is the link [URL]
View 1 Replies
Feb 26, 2010
how do you do the following
A movieclip is playing...
When it reaches frame 20, it goes back and plays at frame 5. Then it keeps doing this. To me this is harder than it looks
View 6 Replies
Jun 10, 2009
With the following AS3, and the following XML how do I update the xml to load in the next sequence of nodes?
AS3:
import com.flashotaku.slideshow.events.SlideshowEvent;
import flash.utils.Timer;
import flash.events.TimerEvent;[code]....
View 1 Replies
