ActionScript 3.0 :: Navigation Away And Back To Frame Resets All Data
Apr 17, 2009
I have some dynamic text fields in a frame called ExerciseFrame (which contain different random numbers, texts, ... and other variables.) When I navigate to another frame called helpFrame and back to the exerciseFrame again, all variables and text fields and other random numbers,... are reset. I mean text fields which contained many data in them becomes empty! I do navigation by a button in exerciseFrame with a simple
eventListener( gotoAndStop("helpFrame");
And in helpFrame another button with this code
(gotoAndStop("exerciseFrame");
How can I keep the state the whole exerciseFrame unchanged when navigating away from it and back to it again? version: AS3 - Flash CS4
View 3 Replies
Similar Posts:
Nov 19, 2003
I have this movie [URL] its for a mates building company ok here is my problem (i will explain it to the best of my abilites) i have 3 buttons which each load 1 seperate SWF into an empty movie clip eg. servicesbutton loads services.swf into contentsMC that is fine that is working fine my problem occurs when the loaded movie button is clicked on again... it resets the loaded SWF back to frame 1... how can i make the loadmove command abit more cleverer? like dont load the movie if its already loaded?
View 5 Replies
Aug 26, 2011
I have a project in Flash Mx 2004. On the first frame there is a menu with 4 menu items. When the user clicks an item, they are taken to another frame with some text and an exit button that takes them back to the menu. The forward button will not become active until all of the menu items have been viewed. There is no particular order for the items to be viewed, just that they all be viewed before the forward arrow is active and the user can continue. I tried puttin an action on the exit button to disable the related menu item, however, the item just resets back to enabled each time a user re-enters the frame.
View 1 Replies
May 23, 2010
I've got an interesting issue with the actionscript in my file. I've created a slide show with 27 labeled frames - they've been labeled "frame 1", "frame 2", "frame 3", etc... My issue is the first time everything works perfectly, if you hit next or previous. It goes to the correct frame. On the last frame if you click next it should take you back to "frame 1" and basically loop through all the frames again if you keep pressing next. The problem is it goes back to frame 1, and then next doesn't work on this frame. I don't understand what's going on considering the first time around - these frames work perfectly.Here's the code on frame 1:
Actionscript Code:[code]........
View 3 Replies
May 24, 2010
I've got an interesting issue with the actionscript in my file. I've created a slide show with 27 labeled frames - they've been labeled "frame 1", "frame 2", "frame 3", etc... My issue is the first time everything works perfectly, if you hit next or previous. It goes to the correct frame. On the last frame if you click next it should take you back to "frame 1" and basically loop through all the frames again if you keep pressing next. The problem is it goes back to frame 1, and then next doesn't work on this frame. I don't understand what's going on considering the first time around - these frames work perfectly.
Here's the code on frame 1:
ActionScript Code:
stop();
/*Navigation Code */
nextbtn.addEventListener(MouseEvent.MOUSE_DOWN, buttonNextHandler);
[Code].....
View 1 Replies
Jun 10, 2009
I'm writing a base class for a clip that holds a scrollbar and some content. I written a function that runs every frame to check if the height of the content is smaller than the height of the available content area. If it is, the scrollbar hides. The problem I've run into is that when i trace the height, every other frame it comes back as 0. If I trace the same exact value when it's used in another function it comes back correct every time. If I trace it in my document class, it comes back correct. Any idea why it comes back zero in just this one spot?
enableScrollBar(); is the function in question
Code:
package includes {
import flash.display.MovieClip;
import flash.events.Event;
[code]....
View 2 Replies
Nov 23, 2010
im using cairnform framework as3 and i have a single swf file, and i m searching a while for back button to go back a previous screen with all data's which r there previously.
View 0 Replies
Apr 11, 2011
I just missed the Flash Q&A @ Facebook... didn't get an answer to my navigation question: I know how to go from 1.swf (scn.1) to 2.swf (scn.1) and back. (buttons) I don't know how from 1.swf (scn.1) to 2.swf (scn.1) then back to 1.swf (scn.3)
View 5 Replies
Oct 21, 2010
I have a Flash website with 3 interfaces( 3 frames with movie clips inside). they have a button that goes to different loaded .html page(text). But once the back button is pushed on the web browser, it always goes back to the first frame instead of the actual last page, which might have been frame 2 or 3.
View 1 Replies
Feb 27, 2009
Actionscript 3.0 I've created 5 buttons that are set up to go to different frame labels on a timeline. They work fine individually (when going from one part of the movie to the new area where I have navigation, the first button clicked will work. Any of the 5. But when I try to go to another button in the navigation..nothing. Here's the AS. Am I missing something?
View 1 Replies
Nov 29, 2011
I can't use navigation between three videoclips by using next/back buttons. My videoclip instance name are..
chapter1
chapter2
chapter4
View 2 Replies
Oct 27, 2009
What is the easiest way (for Fash novice) to navigate back and forth between the slides of presentation made with Flash Slide Presentation feature. Each slide contains animation and plays well the first time but when if I want to back to a slide, it would only show the last frame of that slidI tried many things including making buttons for back and forth and managed to make buttons that fade when you pan over them (big accomplishment:) but can't get them to actually do stuff for me, like go forward and backward. I tried to assign to the button's frame "UP" thee following script but it doesn't work:
onKeyDown = function() {
if (Key.getCode() == Key.LEFT)
gotoAndPlay (_currentframe-1)
[code].....
View 24 Replies
Oct 13, 2010
i have a photo gallery up on page [URL].. that is giving me the blues as far as navigation. i can't go back to images i've already viewed.
View 1 Replies
Jan 6, 2010
I am All Programmer when it comes to anything including flash. I got into making games not to long ago and some people use frames to navigate from the main menu to the game screen and so on (which I have no idea how to do). and some people encapsulate the game inside of a class and call it from the document class and add and remove it when please
View 4 Replies
Mar 24, 2012
i am using google maps and when i have put a button on the fourm to navigate home i am getting a error #1009 here my code hope someone can spot my error
Code:
import com.google.maps.LatLng;
import com.google.maps.Map;
[code]....
View 1 Replies
Mar 20, 2010
I hit enter,it only plays next frame and then goes back to the frame where it stopped. What I've tried was something like:
stop();
Key.addListener(Key.ENTER)
if (Key.isDown.ENTER){
play();
};
I want it to play all the way to the end,not just go back.
View 1 Replies
Nov 25, 2011
This is an if stament on a frame on the root. I want to loop Carrera(a lenghthy movieclip) from frame 2 back to frame 1. (For testing purposes) This is the code:
[Code]...
View 3 Replies
Jun 21, 2009
I've got a movieclip acting as a button. Code on the button itself handles roll-over/-out states, and I define an onRelease function in the main timeline as follows:
[Code]...
This code takes the movie back to the first frame and works on the third frame. For some reason, though, the same code on the fifth frame has no effect. The button doesn't do anything. I have tried using the same button, I tried inserting a new keyframe with a new button, renaming the button, etc. and for some reason I just can't get it to work on the fifth frame. If it helps to visualize, I am essentially making a menu. The first frame contains buttons to take you to submenus, located on following slides. This button to go back to the original menu is on each frame with a submenu, but for some reason only works on one of them.
View 1 Replies
Jul 6, 2003
I'm trying to write an if then statement that will loop back to frame 1 once the next frame it hits is higher than 5. For some reason it doesn't work and I could easily go to frame six and add a go to and play but, I'd like to learn what's wrong instead of doing it the easy way.
[Code]...
View 14 Replies
Feb 26, 2010
how do you do the following
A movieclip is playing...
When it reaches frame 20, it goes back and plays at frame 5. Then it keeps doing this. To me this is harder than it looks
View 6 Replies
Aug 31, 2011
I have a site with an SWF that I can put some metrics into, such as ZIP Code, Weight, etc.. then, it takes that info and gives me shipping rates.
I need to build a front-end site that I can have a forms page that will push data to the backend SWF, and then return the data back from the SWF to the front end.
Front-end -> SWF (Zip Code, Weight, Size) -> *Calculates* -> Front-End
That should be the flow.. So I need to send data to the backend, GET the data that it calculated, and return the results to my front-end.
View 3 Replies
Oct 7, 2009
I have a timeline that has some label frames at the very end of the timeline. During the timeline a user will hit a button on a frame and will jump to one of the label frames. On the label frame is another button that when clicked - returns the user to the previous frame. How do I make the movie return to frame 1 - without a button - but before it reaches the label frames? In other words, by simply reaching a certain frame in the movie, I want the timeline to go back to frame 1.
View 3 Replies
Aug 26, 2009
I'd like to have a function that tells a MovieClip to go to a specific frame and then in this frame, look for a scpecific tag in an XML file, based on the frame's label, and then take some text (a bunch of actually) that is in the XML node and put it on a TextField.
For example, clicking on a "Next Frame" button it will go to the next frame (which has a label "intro") of the movieclip and then search "content.xml" for the tag that contains the attribute name equal to "intro" and then put the content of the ".@TEXT" node into an empty TextField that is already positioned in this "intro" frame. Am I obligated to have the code in this specfic frame? I'm doing it because if I have too much text within textfields in an FLA file it becomes incredibly lagged and therefore impossible to work.
I've tried to use the event ENTER.FRAME to do that but it rendered the
SWF lagged and consomming way too much memory.
View 2 Replies
Nov 11, 2004
I'm trying to build a nav bar with 3 buttons, using only 1 frame, and no tweens, as only.The wanted efect I can achive with 2 buttons:
>> here <<
With the 3 buttons I get this:
>> here <<
What I want is: a button can only became active (going up) when all other buttons are inactive (down).In this last example some buttons don't wait until other buttons are inactive, they become active right away!In this last example using the 3 buttons I use this code:
[code]...
View 3 Replies
May 31, 2009
I'm trying to create something similar to this url...but don't understand how to do it programatically.[code]I've named my frames "Funny old man", "Angry mother", and so on and so forth. How can I accomplish this?
View 2 Replies
Nov 9, 2009
I am a total newbie with AS, I have this error.. TypeError: Error #1009: Cannot access a property or method of a null object reference. at all_new_fla::MainTimeline/frame1()
[Code]...
View 2 Replies
Oct 14, 2010
OK so I have a flash project consisting of four keyframes with "stop()" on the first frame so that it doesn't play through.I have "next" and "back" buttons on each keyframe so that you can navigate between the frames.However, I have a problem where the buttons seem to remember the frame they were on and they skip keyframes when navigating back and forth.Example:I'm on keyframe 2 and press the "next button" and it takes me to keyframe 3.I'm now on keyframe 3 and I press the "back button" and it takes me back to keyframe 2.I'm back on keyframe 2 and I press the "next button" and it takes me to keyframe 4???I have basic code on each keyframe.On keyframe 2 I have this code:
Code:
next_btn.addEventListener(MouseEvent.CLICK, nextone);
function nextone(event:MouseEvent):void
[code].....
View 1 Replies
Jun 12, 2007
I have built a flash movie, ASP page to declare the variables, ASP page to show the flash movie and connected to a database. In the ASP page I have the following code.
[Code]...
View 1 Replies
Jul 14, 2009
I have a show I'm trying to create, I need to put the navigation buttons on different places on each frame due to content.
Code:
on (release) {
prevFrame();
}
or
Code:
on (release) {
nextFrame();
}
and
Code:
on (release){
gotoAndplay("Scene1")}
I can get the symbols that I'm using as buttons to work in the first and second frame, but they will not work after that. Each frame has a
Code:
stop ();
Action applied to it.
I have tried: copy and pasting the same symbol into multiple frames, dragging new symbols into multiple frames, creating folders for each frame and dragging new symbols into those folders then onto a frame, and I'm still not having luck. This presentation is set up to run in Flash 9 with Bottom up loading order and ASP2
View 1 Replies
Oct 17, 2005
i have an animation that its something like a safety lock that make an entire loop, so i want some script that when i click lets say "about" it goes to "about" and stop, and them when i click lest say "contact" the animation goes to contact but without start over, i mean, i want to that to start from the last point, i dont know how do it in action script?on realease if is at "frame name" goto and play "frame name", and stop at "frame name".
View 3 Replies
