ActionScript 2.0 :: Loadmovie Command - Resets The Loaded SWF Back To Frame 1
Nov 19, 2003
I have this movie [URL] its for a mates building company ok here is my problem (i will explain it to the best of my abilites) i have 3 buttons which each load 1 seperate SWF into an empty movie clip eg. servicesbutton loads services.swf into contentsMC that is fine that is working fine my problem occurs when the loaded movie button is clicked on again... it resets the loaded SWF back to frame 1... how can i make the loadmove command abit more cleverer? like dont load the movie if its already loaded?
View 5 Replies
Similar Posts:
Apr 17, 2009
I have some dynamic text fields in a frame called ExerciseFrame (which contain different random numbers, texts, ... and other variables.) When I navigate to another frame called helpFrame and back to the exerciseFrame again, all variables and text fields and other random numbers,... are reset. I mean text fields which contained many data in them becomes empty! I do navigation by a button in exerciseFrame with a simple
eventListener( gotoAndStop("helpFrame");
And in helpFrame another button with this code
(gotoAndStop("exerciseFrame");
How can I keep the state the whole exerciseFrame unchanged when navigating away from it and back to it again? version: AS3 - Flash CS4
View 3 Replies
Apr 1, 2009
I have created an interface that uses a lot of the loadMovie command using levels. Once I have loaded a movie on say level 3...in that level 3 movieclip I will have another navigation that will load and then use the loadMovie command to load movie on level 3 as well. It loads it correctly but the back button that would contain the unloadMovie(3) command isn't unloading, say if the user wants to go back.
View 2 Replies
Aug 26, 2011
I have a project in Flash Mx 2004. On the first frame there is a menu with 4 menu items. When the user clicks an item, they are taken to another frame with some text and an exit button that takes them back to the menu. The forward button will not become active until all of the menu items have been viewed. There is no particular order for the items to be viewed, just that they all be viewed before the forward arrow is active and the user can continue. I tried puttin an action on the exit button to disable the related menu item, however, the item just resets back to enabled each time a user re-enters the frame.
View 1 Replies
Jan 14, 2009
I have a HTML stageholder, this calls a "mainMenu.swf" which essentially controls my site. This "mainMenu.swf" has three buttons: intro, portfolio and contact which are all individual movies. So far, all good... When I have clicked into the portfolio section a 3x3 grid loads with nine buttons, one of these buttons loads a preview page for four movies, when I load one of these movies it plays fine. What is the path to get the loadMovie command to jump back to the 3x3 grid page from this movie? Basically, what is the command to jump up a directory when using loadMovie?
[Code]....
View 1 Replies
May 26, 2011
I have a GUI using Flex. I have a condition like i need to execute some command line arguments in the local machine and get the results back or output back to a textbox area. How can i do a button on submit, execute command in the local machine and return the output?Command to execute example:
echo logfile.log | grep username
Code:
button1.onRelease = function ()
{
// in this computer, it will now run a command, please wait.
}
View 1 Replies
Jun 10, 2009
I'm writing a base class for a clip that holds a scrollbar and some content. I written a function that runs every frame to check if the height of the content is smaller than the height of the available content area. If it is, the scrollbar hides. The problem I've run into is that when i trace the height, every other frame it comes back as 0. If I trace the same exact value when it's used in another function it comes back correct every time. If I trace it in my document class, it comes back correct. Any idea why it comes back zero in just this one spot?
enableScrollBar(); is the function in question
Code:
package includes {
import flash.display.MovieClip;
import flash.events.Event;
[code]....
View 2 Replies
Jul 21, 2007
I have a movie clip with a stop command on frame 1 and a stop command on frame 20.I'm trying to have two separate buttons that tell the MC (onRollOver) to play forward or to play backwards.
The actionscript on button #1-
PHP Code:
on(rollOver){ gotoAndPlay(_currentframe +1);}
The actionscript on button #2-
[Code]...
View 1 Replies
Aug 24, 2009
As shown in the example... I have entered an action to load a movie when I press a button.It works fine but the original swf was made at 800 by 600 when I need it to be 400 by 200.Is there a way to have the video loaded smaller using some kind of width and height line to the command above?I don't want to have to go redue the swf I am loading in...In the swf, I am working on this for class, so It is not finished or have any real sense to it, other than what is required by the teacher
View 5 Replies
Nov 19, 2003
ok here is my problem (i will explain it to the best of my abilites)i have 3 buttons which each load 1 seperate SWF into an empty movie clipg. servicesbutton loads services.swf into contentsMCthat is fine that is working fine my problem occurs when the loaded movie button is clicked on again... it resets the loaded SWF back to frame 1... how can i make the loadmove command abit more cleverer? like dont load the movie if its already loaded?
View 5 Replies
May 20, 2005
My site has a picture gallery. It works with a movieholder and the loadMovie command. It has 9 buttons, one for each picture, and they work. There's also a previous and next button to navigate through the pictures, there the loadMovie command gives problems.
Here are 2 lines that are used in the previous button:
Code:
_root.site.alles.movieHolder.loadMovie("images/1.swf");
Code:
_root.site.alles.movieHolder.loadMovie("images/"+(fotovariabele1-1)+".swf");
I get the following error with that button:
Error opening URL "file:///C|/school/multimedia/VOLLEDIG%20NIEUWE%20SITE/images/NaN.swf"
I know nothing about a Nan.swf. I don't understand why these lines don't work in the previous button, because the 1 button (the button that loads image 1) also uses the first line, and that works. I know only very basic actionscript, but the code of the previous and next buttons are supposed to be correct except for those lines with loadMovie. In publish settings is actionscript 2.0 set.
View 3 Replies
Jun 2, 2009
i am trying to write an image gallery using the loadMovie comand, loading jpegs into a blank movie clip the thing is, all the tutorials seem based around issuing the loadMovie command as you press a button to actually view that particular picture what I am trying to achieve is to have maybe the 1st and 2nd image of the gallery included in the flash movie and these load up and show instantly but whilst the viewer is looking at these the swf is busy preloading all the other images in the background. The idea being that images are loaded faster than the navigation that takes place so when the user clicks on the 3rd image it is already loaded and displays instantly and so on and so forth question is, how do i achieve this ? Do i still use loadMovie but have one script at the 1st frame that loads say all 20 images each into a different empty movie clip ?
View 7 Replies
Jun 23, 2009
My question is in bold and underlined in the AS below. How can I have a loadMovie command that loads the swf depending on the label name?
AS:
Code:
var menuArray:Array = [{mc:p1, name:"Hardin & Luckett (Marana)", label:"HardinLuckett" },
{mc:p2, name:"Dove Valley", label:"DoveValley" },
{mc:p3, name:"RESUME", label:"resume" },
[code]....
View 0 Replies
Oct 19, 2002
Is is possible to load a movie ising the loadmovie command into a different swf???
View 14 Replies
Oct 28, 2002
I have the following which works fine just out side of the loop statement:
loadMovie("icons/test.jpg", "pIcon0.Icon");
But inside the loop statement no image shows up.
I need it in the loop statement because eventually the code will call the jpgs out of an array based on the loop variable. And put them in a movieclip number by the variable also.
View 1 Replies
Feb 13, 2006
I have a photographer's portfolio site in the works. I'm using loadMovie connected to thumbail buttons of each photo to show a larger version of the photo. Here is the script[code]...
Now the photographer would also like to have a next/previous arrow buttons so the user can click through like a slide show. Is there a way to have Flash know what movie is currently loaded and based on that information go to the next or previous?
View 1 Replies
Apr 21, 2003
My problem is that if i do an drop-menu-animation and i put it in my button, i can't manage the command LoadMovie, in the primary stage of the site...
What should i do?
View 1 Replies
Jul 9, 2002
I want to load a movie loadMovie ("target", _root....) and so on. My question is can you target a specific scene in the load movie command?? I have a movie with a button that loads a new movie into level 0 so it replaces the first movie. Now in the new movie I have a button that unloads the new movie and loads the previous one. But it starts it off at the veru beginning of the movie. I want it to pick up where the first button click took place.
View 2 Replies
Oct 21, 2010
I have a Flash website with 3 interfaces( 3 frames with movie clips inside). they have a button that goes to different loaded .html page(text). But once the back button is pushed on the web browser, it always goes back to the first frame instead of the actual last page, which might have been frame 2 or 3.
View 1 Replies
Nov 29, 2009
In this bit of code is there anyway to adjust the gotoAndPlay Command to play from frame 114 to frame 200. Are there any commands that will do this. I want it to play from frame 114 to frame 200 when a button is pressed.
[Code]...
View 1 Replies
Mar 31, 2004
load an external jpg in frame 2 with a command in frame 1? Very important to my project to get at least a yes or no.
View 4 Replies
Mar 20, 2010
I hit enter,it only plays next frame and then goes back to the frame where it stopped. What I've tried was something like:
stop();
Key.addListener(Key.ENTER)
if (Key.isDown.ENTER){
play();
};
I want it to play all the way to the end,not just go back.
View 1 Replies
Nov 25, 2011
This is an if stament on a frame on the root. I want to loop Carrera(a lenghthy movieclip) from frame 2 back to frame 1. (For testing purposes) This is the code:
[Code]...
View 3 Replies
Jun 21, 2009
I've got a movieclip acting as a button. Code on the button itself handles roll-over/-out states, and I define an onRelease function in the main timeline as follows:
[Code]...
This code takes the movie back to the first frame and works on the third frame. For some reason, though, the same code on the fifth frame has no effect. The button doesn't do anything. I have tried using the same button, I tried inserting a new keyframe with a new button, renaming the button, etc. and for some reason I just can't get it to work on the fifth frame. If it helps to visualize, I am essentially making a menu. The first frame contains buttons to take you to submenus, located on following slides. This button to go back to the original menu is on each frame with a submenu, but for some reason only works on one of them.
View 1 Replies
Jul 6, 2003
I'm trying to write an if then statement that will loop back to frame 1 once the next frame it hits is higher than 5. For some reason it doesn't work and I could easily go to frame six and add a go to and play but, I'd like to learn what's wrong instead of doing it the easy way.
[Code]...
View 14 Replies
Feb 26, 2010
how do you do the following
A movieclip is playing...
When it reaches frame 20, it goes back and plays at frame 5. Then it keeps doing this. To me this is harder than it looks
View 6 Replies
Feb 2, 2009
I'm having an issue with some pictures and a gotoAndStop on frame one command. I have pictures on my website that appear when clicked on, and I've placed a simple close button in the top left corner of the picture that simply tells flash to go back to frame 1 (gotoAndStop(1)). However, it seems that in Internet Explorer (not in FF) when the close button is clicked it goes back to frame one but it leaves part of picture still displayed although it seems to dissapear in segments when rolled over with the mouse. Here is the website where this is occurring: [URL]. Btw, I'm using the flash eff component, but the problem seemed to still occur after i removed all flash eff instances.
View 2 Replies
Dec 13, 2010
I will try to keep this as precise and to the point as possible as not to waste anyone's precious time.
My problem here is that I have made a website on AS3, and it required a dynamically loaded XML gallery. All that is done and everything is working perfectly except one requirment
The website has a submenu and that submenu should send XML commands to the loaded swf.
ok now you can see that the thumbnails are links to the images or subcategories...
but if you look at those labels of the buttons you will see thats they are same as the sub menus.
So basically what I need is that sub menu buttons should bring the corresponding galleries just like the gallery buttons..
I tried to do it but loading in the gallery and keeping it invisible and then trying to figure out how to pass the same AS command as the buttons and I have been unsuccesful.
I am adding the galleryclass.AS file.
[Code].....
View 2 Replies
Oct 7, 2009
I have a timeline that has some label frames at the very end of the timeline. During the timeline a user will hit a button on a frame and will jump to one of the label frames. On the label frame is another button that when clicked - returns the user to the previous frame. How do I make the movie return to frame 1 - without a button - but before it reaches the label frames? In other words, by simply reaching a certain frame in the movie, I want the timeline to go back to frame 1.
View 3 Replies
Jun 27, 2009
Is there a command that I can use to render the current frame?
What I want to do is have a loop that moves an object by 1px and renders the current state at each loop.[code]...
So if there is any way to draw the frame without actually reaching the end of the frame's script and then sending the movie back to frame 1 (there must be) that would be helpful. I think that such a thing would make my programs much more efficient.
View 2 Replies
