ActionScript 2.0 :: Write An Image Gallery Using The LoadMovie Command?
Jun 2, 2009
i am trying to write an image gallery using the loadMovie comand, loading jpegs into a blank movie clip the thing is, all the tutorials seem based around issuing the loadMovie command as you press a button to actually view that particular picture what I am trying to achieve is to have maybe the 1st and 2nd image of the gallery included in the flash movie and these load up and show instantly but whilst the viewer is looking at these the swf is busy preloading all the other images in the background. The idea being that images are loaded faster than the navigation that takes place so when the user clicks on the 3rd image it is already loaded and displays instantly and so on and so forth question is, how do i achieve this ? Do i still use loadMovie but have one script at the 1st frame that loads say all 20 images each into a different empty movie clip ?
I'm creating a DVD with an image gallery, everything local. But the thing is my loaded images appears within flash, and not outside when I execute the swf. The path of the image is inside an array (from an xml file). If I write the path of my trace(array[x][x]), the image outside flash is shown. But when I write: loadMovie(array[x][x].toString()) or loadMovie(array[x][x]) It doesn't... I did a trace of array[x][x] and it shows me the exact path to the image.. Code: _root.obra_mc.containerImg_mc.loadMovie("images/Patrimonio/Ceramica/"+(obras[0][1]).toString());
As shown in the example... I have entered an action to load a movie when I press a button.It works fine but the original swf was made at 800 by 600 when I need it to be 400 by 200.Is there a way to have the video loaded smaller using some kind of width and height line to the command above?I don't want to have to go redue the swf I am loading in...In the swf, I am working on this for class, so It is not finished or have any real sense to it, other than what is required by the teacher
ok here is my problem (i will explain it to the best of my abilites)i have 3 buttons which each load 1 seperate SWF into an empty movie clipg. servicesbutton loads services.swf into contentsMCthat is fine that is working fine my problem occurs when the loaded movie button is clicked on again... it resets the loaded SWF back to frame 1... how can i make the loadmove command abit more cleverer? like dont load the movie if its already loaded?
My site has a picture gallery. It works with a movieholder and the loadMovie command. It has 9 buttons, one for each picture, and they work. There's also a previous and next button to navigate through the pictures, there the loadMovie command gives problems.
Here are 2 lines that are used in the previous button: Code: _root.site.alles.movieHolder.loadMovie("images/1.swf"); Code: _root.site.alles.movieHolder.loadMovie("images/"+(fotovariabele1-1)+".swf");
I get the following error with that button: Error opening URL "file:///C|/school/multimedia/VOLLEDIG%20NIEUWE%20SITE/images/NaN.swf"
I know nothing about a Nan.swf. I don't understand why these lines don't work in the previous button, because the 1 button (the button that loads image 1) also uses the first line, and that works. I know only very basic actionscript, but the code of the previous and next buttons are supposed to be correct except for those lines with loadMovie. In publish settings is actionscript 2.0 set.
I have the following which works fine just out side of the loop statement:
loadMovie("icons/test.jpg", "pIcon0.Icon");
But inside the loop statement no image shows up.
I need it in the loop statement because eventually the code will call the jpgs out of an array based on the loop variable. And put them in a movieclip number by the variable also.
I have created an interface that uses a lot of the loadMovie command using levels. Once I have loaded a movie on say level 3...in that level 3 movieclip I will have another navigation that will load and then use the loadMovie command to load movie on level 3 as well. It loads it correctly but the back button that would contain the unloadMovie(3) command isn't unloading, say if the user wants to go back.
I have a photographer's portfolio site in the works. I'm using loadMovie connected to thumbail buttons of each photo to show a larger version of the photo. Here is the script[code]...
Now the photographer would also like to have a next/previous arrow buttons so the user can click through like a slide show. Is there a way to have Flash know what movie is currently loaded and based on that information go to the next or previous?
I have this movie [URL] its for a mates building company ok here is my problem (i will explain it to the best of my abilites) i have 3 buttons which each load 1 seperate SWF into an empty movie clip eg. servicesbutton loads services.swf into contentsMC that is fine that is working fine my problem occurs when the loaded movie button is clicked on again... it resets the loaded SWF back to frame 1... how can i make the loadmove command abit more cleverer? like dont load the movie if its already loaded?
I have a HTML stageholder, this calls a "mainMenu.swf" which essentially controls my site. This "mainMenu.swf" has three buttons: intro, portfolio and contact which are all individual movies. So far, all good... When I have clicked into the portfolio section a 3x3 grid loads with nine buttons, one of these buttons loads a preview page for four movies, when I load one of these movies it plays fine. What is the path to get the loadMovie command to jump back to the 3x3 grid page from this movie? Basically, what is the command to jump up a directory when using loadMovie?
I want to load a movie loadMovie ("target", _root....) and so on. My question is can you target a specific scene in the load movie command?? I have a movie with a button that loads a new movie into level 0 so it replaces the first movie. Now in the new movie I have a button that unloads the new movie and loads the previous one. But it starts it off at the veru beginning of the movie. I want it to pick up where the first button click took place.
if else statement I am trying to write for a gallery. I want to have it so if picture is on last one to go to first set on xml. Heres what I am writing it as:
Code: function nextImage() { if (p<(total-1)) { p++;
[code].....
I have it written on my next image function because many things refer to that so check here then proceed to first set if on last. The problem is it stays on 4 or last item in xml. Can someone hit me with some insight.
I try to explain me well (i'm italian) ... if i load the gallery with the loadMovieNum options the gallery work in the correct way but if i load it with loadMovie using a target MC it doesn't work...
I'm loading a .png image with loadMovie() and I need to center the image (for later dragging). I know flash has some issues with loading stuff, but I really need to get the movieclip's width. If someone knows how to get over this and get the movieclip's width
This is a part of a more complex app, so that's why I won't paste any code.
i am trying to add extra images to the photo gallery attached. I would have thought it is easy and it seems so. I add an extra image to the gallery. I publish it. The html file shows the extra image in the gallery but the swf doesnt. driving me crazy, cant work it out?
I've made a gallery slideshow before but wasn't as intuitive looking back at it now and I want to start fresh on this new project. I would like to convert a jQuery lightbox style gallery into a flash XML based AS3 image gallery with categories. I don't want to code the FLA, I want separate AS files.
This is a school project for my website. I would use jQuery and I have more experience with it but this project needs a flash component. I'm just not sure where to start and looking for some advice on how and where I could find resources. I want it to be minimal as I can make it;
- 8 thumbnails to a "page/section" with more flowed into page 2 or 3 etc. (or a srcoller)
- a few buttons for categories
- images fading in full size with a description when hovered over and a close button
- preloader (simple bar)
Esentially something like this > http:[url].........works which is using http:[url].... for the thumbnails. That might be ambitious but I'd suffice with a simple fade effect.I've downloaded some galleries out there but most of the code is messy or outdated.http:[url]... this is alright, but all the code is done in the FLA. I might break it into AS files but it depends.
I'm working on a project with the jpgEncoder to create an image file that currently downloads but I need help with the code to save the dynamically created jpg back to the webserver.
This code works great in a desktop air application but doesn't work at all in android. is this not possible yet in air for android? here's my code.[code]image area is a flex group with several displayed children.
I have a gallery where passing over the image a rectangle drops down showing the caption for the image. The informations are read from an XML file and some of my images don't have a caption, for those emails I want to avoid the tween.
I'm trying to find out how to make a simple image gallery which changes image upon a mouse click on a button, when a button is pressed I want the image to slide in from the left into the viewable area and then when another image is selected I want the previous image that was viewed to remain in the screen and then the new image slide across over the top to replace the image.
I can get the images to slide across from the left upon a mouse click however I can't change the layer order so if image 6 is viewed and then I click to see image 1, the image will slide into place however it will be below image 6 so therefore not viewable.
I don't have an example of what I'm after but I hope my explanation was good enough, I've seen this been done in javascript but I have to use flash and am unable to replicate the effect I'm after
I have this piece of code to change images. I was trying to figure out how you could put a timer on the code, so if the image has been displayed for say 5 seconds it diverts to the next image automatically? Also if it's not to hard, when it has played to the end to divert to the 1st image.
I'm trying to save an image to the application directory by opening a file stream and write the bytes from a bitmap data. I added some events listeners for testing the file stream process but I don't receive any response event. [code]...
