With the following AS3, and the following XML how do I update the xml to load in the next sequence of nodes?
AS3:
import com.flashotaku.slideshow.events.SlideshowEvent;
import flash.utils.Timer;
import flash.events.TimerEvent;[code]....
I'm a flash newbie and have created a slideshow so that all the photos fade in and fade out. I've done it so they kind of fade into each other. So the timelines on each layer overlap. I want this slideshow running as a continuous loop so I've put a gotoandPlay(1) function at the end of the movie. My problem is the final image (number7) fades out but I don't know how to get it fading into the first photo again. So after the 7th image (the 2 bridesmaids) the movie completely fades out and then starts again. Is there a way I could make the first and last photos fade into each other rather than the last one fading out and starting again. The movie can be viewed here- sorry it takes a little time to get to the last image! [URL].
View 1 RepliesI can't seem to figure out how to get my slideshow to stop looping after I imported an external video. It will no longer stop at frame one, it simply plays all the way through the frames with no pause even though I have a stop(); on each frame.
The file functions properly until I added the FLVPlayback component. It was looping even when the FLVPlayback component was in the library and exported for actionscript and in frame 1. After unchecking these boxes it won't loop, however that all changes as soon as I drag an instance of the component on stage or inside a movie clip on stage.
The flash presentation I'm working on is designed so 1 frame is one slide and I need the video to be playable from 1 slide (frame). Even after placing stop actions everywhere I could think of it still loops straight through with the FLVPlayback component.
I want to trim a sound and then let it loop in a slideshow. The sound -- a roaring crowd at a soccer game-- should loop as a slideshow plays. As the movie repeats the sound should continue to play. It doesn't have to be in sync.
This works if I use Streaming, but there's a gap at the beginning of the movie as if the sound was being loaded over and over again.
I've been advised not to use Streaming, but if I don't, the sound is reproduced in its entirety-- there is no trimming.
i have a slidehsow and my code is as follows"waitSec = 5;setInterval(Timer, waitSec*500);//function Timer() {gotoAndPlay(nextFrame()); }stop();"it has 5 frames as i have 4 pictures in my slideshow.but i need to loop it so it can go back to frame 1 in my slideshow after frame 4also when i click on a button on my slideshow it will go to that image but then instantly go to the nexct image and then carry on as normal why ndoes it do that?
View 10 Replieshow to restart/loop that for continuos slideshow:
import com.greensock.*;
import com.greensock.easing.*;
TweenLite.to(t1_mc, 1, {x:-2.2, y:-103.5, alpha:0, delay:5});
TweenLite.to(2_mc, 1, {x:-3.1, y:-96.5, alpha:0, delay:10});
TweenLite.to(3_mc, 1, {x:-83.0, y:-108.8, alpha:0, delay:15});
how to make this file go from Image 3 to Image 1 when clicking the right arrow, and from image 1 to image 3 when clicking the left arrow, like a continuous loop:
showjing.net84.net/slideshow
(the file is called index2.fla)
I've got an interesting issue with the actionscript in my file. I've created a slide show with 27 labeled frames - they've been labeled "frame 1", "frame 2", "frame 3", etc... My issue is the first time everything works perfectly, if you hit next or previous. It goes to the correct frame. On the last frame if you click next it should take you back to "frame 1" and basically loop through all the frames again if you keep pressing next. The problem is it goes back to frame 1, and then next doesn't work on this frame. I don't understand what's going on considering the first time around - these frames work perfectly.Here's the code on frame 1:
Actionscript Code:[code]........
I have just recently returned to flash after a very looooooooong time! I moved out of the flash world a few years ago and have been working in design for print. A friend has asked me to help create a flash slideshow for them. I know how to do this using older versions of flash but there seems to be a quicker way in CS3.I have selected from the opening menu, Flash Slide Presentation.I have created my slideshow and added transitions.Everything looks great however I can only progress the slideshow using the arrow keys.My question is...Using this slideshow setting can I set my slideshow to loop through the slides automatically instead of progress with the arrow keys?
View 2 RepliesI've got an interesting issue with the actionscript in my file. I've created a slide show with 27 labeled frames - they've been labeled "frame 1", "frame 2", "frame 3", etc... My issue is the first time everything works perfectly, if you hit next or previous. It goes to the correct frame. On the last frame if you click next it should take you back to "frame 1" and basically loop through all the frames again if you keep pressing next. The problem is it goes back to frame 1, and then next doesn't work on this frame. I don't understand what's going on considering the first time around - these frames work perfectly.
Here's the code on frame 1:
ActionScript Code:
stop();
/*Navigation Code */
nextbtn.addEventListener(MouseEvent.MOUSE_DOWN, buttonNextHandler);
[Code].....
I have created a pie preloader(preloader.zip) which is working fine. Same preloader I am trying to incorporate in a xml based slideshow(slideshow.zip) to show image loading process but some how I got stuck. I am new to flash. Suggestions are welcome.
1. How to solve the problem of preloader2. Is it possible to integrate everything in a movie clip (including AS). I mean no AS on main time line but inside the movie clip. It would be much easier then to to create multiple slideshows by duplicating mc and changing the xml file.
i have a question about text in a slideshow. i know how to make a basic photo slideshow with external images. but now what i want to do is add 4-5 paragraphs of text next to each photo (with possible scrolling). the text will be different on each photo.
View 1 RepliesI would like to create a loop so the icons in the menu continually loop indefinitly.[code]
View 2 RepliesI am attempting to use a loop to create text field with the loop's current value. The code looks like this:
ActionScript Code:
for (var i = 1; i<=10; i++) {
var 'nameHolder'+[i]+'_txt':TLFTextField = new TLFTextField();
'nameHolder'+[i]+'_txt'.x = 40
'nameHolder'+[i]+'_txt'.y = 40
'nameHolder'+[i]+'_txt'.text = "Hello World"
}
So essentially what it should do is create 10 text fields at 40, 40 with the text: "Hello World".
i'm trying to do an infinate loop for my m.clip.the looping part does not want to loop...it loops back to my firrst frame even though there are two same picture in the movie clip.....here's a sample of what i use for the infinate loop script..
[Code]...
I have need of loops / nested loops that pick different figures depending on where you are in the loop. The whole function needs to run through 'ml' times. 'ml' is a dynamic figure. Loop 1 = While the loop is within the first 12 iterations, 'exconemp' must equal 100. For iterations 13 - 24, 'exconemp' must equal 102.5, for 25 - 36 it will be 105.06, for 37 - 48 it will be 107.69. This needs to change every 12th iteration until it has reached 'ml'. The calculation takes the value of the previous 'exconemp' and then multiplies that by 0.025.
Loop 2 = While the loop is within the first 120 iterations, 'abc' must equal 0.015 and any further iterations must use 0.01. This must also work in a way to figure out whether 'ml' is higher or lower than 120 and work accordingly. My main issue is this - how do I get the loops to run through as this: While the iteration is < 12, do this, THEN take the final figure (12th iteration) and start on 13 - 24, do this THEN etc etc. How do I produce a THEN statement? I can get the code to pick up the final values, but not change along the way.
[Code]...
Say, I had a loop in a function...
[Code]....
How would I refer to a in another function
Should I declare the _mcContainer var before the loop or no? (performance increase?)
for(var i:uint = _startIndex; i <= _endIndex; ++i){
var _mcContainer:MovieClip = _mcParent["i_" + _position];
}
[Code]....
Recently I'd been criticized for structuring my for loops like so:
var i:MovieClip;
for each(i in array)
{
[Code]....
This reads better for me personally, yet I'm being attacked for it. Is there any difference?
basically I need a loop within a loop to compare two different arrays in my actionscript3 lottery game. I have attempted the loop but I cannot seem to get it to work ...
[Code]....
So basically within this code check_win is a button. Once the button is clicked it runs the loop. It is meant to take an instance of matches which contains 6 properties and loop until index is greater than matches. According to my output this is happening but the second loop doesn't appear to do anything.
How do i word a for loop to make it loop through multiple arrays?I want 1 for loop to loop through multiple arrays in order to move/alter objects.I want to keep the arrays separate.
ActionScript Code:
characters = new Array();
characters[0] = male;
[code]........
I'm trying to make a matching pairs game. First of all I'm making all the tiles, using a loop inside a loop. How do I get the ID of an item inside that loop? My code looks like follow:
Code:
var matches:Array=new Array(1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8);
makeTiles();
function makeTiles() {
[Code].....
dayVal = day.value;
for(dayVal = 1; dayVal/7 != 1; dayVal++)
{trace (dayVal);
}
the loop starts at 0 and not 1 so the loop ends at 6 does any one know how to resolve this issue?? its so that what ever number dayVal is it will be rounded up to a number that is Divisble by 7 .
Basically, I have data organized by date in an XML file. I'm trying to make a website application that will allow the user to click on a date (in a text field) to see another textfield populate with all the data under that particular date. So far, all the information loads into the textboxes at the same time. How can I get it to only load information under a particular date when somebody clicks on that date?
Before I started this project, I was convinced I could do this by manipulating the [j] (see code below) in the myFunc2 function. Currently, it's set up to increment blank_mc._y by whatever value is returned by [j]. But for some reason this doesn't work. I feel that if I could atleas get this part to work - I could probably do the rest.
AS code:
Code:
function loadXML(loaded) {
if (loaded) {
var nodes = this.firstChild;
[code]....
I have some code that seems to have a problem. I can't seem to pass the x variable from one loop to within another loop.
Code:
var myLv = new LoadVars();
var myNv = new LoadVars();[code]....
wondering if anyone knows if its possible to have a pause within a 'for loop' before it runs through the next loop? heres the script i've built up so far, i'm running off other variables and arrays to pull in the logos and the animating in is working fine except that they all run in at the same time, basically what i want is that they would run one after the other with a 5 second gap between them..[code]so i did that and put wait(delay); after the var boxcounter=2; in each of the If statements.. but no luck... can anyone shed any light? or suggest a way it get it to hold for a few seconds before running though the loop again? or am i going about this in completely the wrong way??!
View 5 RepliesI have published my intro to my website I checked "Loop" and unchecked "Loop" under the Flash section of publishing no matter which I it continues to loop and not go to my website. This is the action I am using:[URL]...
View 1 RepliesI have a variable in a loop that i want to access in a function outside of the loop. However the variable gets deleted when the loop is closed so no longer exists when i call in the function.here is the code; i'm trying to access the variable picHeight from within the scroll function
Code:
pauseTime = 3000;
xmlImages = new XML();
[code].....
I'm trying to synchronize external subtitles with my custom video player - Not FLVPlayback.Subtitles are in XML object from 0 - 12.I created a Timer that is checking when the subtitle 0 should be displayed according to playback time.I want to reach that after subtitle 0 disappear the next subtitle 1 will be checked when should be displayed.So all I want is 0 + 1But it is Timer and the result after Subtitle 0 disappear is 0+1+1+1+1+1+1+1+1+1+1+1 ad infinity And thats too many as I only want once add 1.
View 1 Repliesi have tried to keep this as simple as possible in order to demonstrate my confusion - i have looked at this for too long now and i really dont understand how this for loop works - sorry for the example length.
[Code]....
i can fully see how things work up until i hit the FOR LOOP EVALUATION: child !=null at that point the loop is broken and the trace statements with xxxxx and yyyy come into play but why is there 4 lots of x and y traces? if the loop is broken and child = null which it does why does the statement carry on 4 more times - should it not just return? i understand that the update part of the for loop will execute only at the end of the loop but this still does not show why it should carry on like this?