I have published my intro to my website I checked "Loop" and unchecked "Loop" under the Flash section of publishing no matter which I it continues to loop and not go to my website. This is the action I am using:[URL]...
View 1 RepliesThis was originally a tween, i converted it to code and removed the tweens.[code]....How can i loop that so the animation continues to run, because right now it only runs once.
View 4 RepliesI just recorded some song and cut it into two parts. The first part contains an intro and the second is supposed to loop. What I want to do now, is to have a simple graphical animation (5 keyframes or so) that loops as well, while the music plays along.
View 1 RepliesI needed to make a loop for a intro splash, and since I have only programmed in php before, I tried this (to my suprise it didn't give a syntax error):
Code:
count=0;
if (count < 5) {
gotoAndPlay(40);
[Code].....
I made a 2 frame flash. The first frame has a container that holds the movie clip, masks, audio & transitions for the intro. This frame I only want to play once. Then I want it to advance to frame 2 upon completion. Frame two is a leader/score board that will hold score tallies (it is linked to a TXT file that is linked to an ASP, which has not been completed yet), and therefore, it needs to loop into infinity. When I have the FLA open and I press CTL + Enter the intro plays then automatically advanced to the 2nd frame which loops to infinity.
(This is perfect -- this is how I want it to perform). When I go to the folder where the SWF and EXE are published, and I double clidk to open either one of them up, the intro keeps looping and never advances to the 2nd frame. I have to manually press next frame on the pull down menu -- and that is not feasible since this leaderboard will inevitably end up on a big monitor with an audience. Here is the link to the file: [URL].
First, I am an ultra newb who has read about 50 tutorials in the past two weeks or so.So, here is what I am trying to do. I have a header navigation box in my flash page. I want, when someone opens the page, for an animation to play. Then, I want it to stop and display my menu.
What I have done: I created two frames and put my animation in one inside the movie clip. The second frame has the menu. When I try to test it, The frames flicker and the animation doesnt play.I tried putting stop() at the end of both frames. This just made it...not do anything and just display the menu.
A friend suggested putting "root.gotoAndStop(2);" at the last frame of my animation, but then I get an error.
On very slow machines (>p200Mhz) I sometimes get an error that says "A script in the movie is causing macromedia flash player 6 to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script?" Yes, No.
I have a loop function that populates a listbox, sometimes the file it loops from is over 2000 lines, and takes a long time for the listbox to populate. In this time I get the error. If I hit No on the error everything works just fine. I am almost for sure there is no problem with my script, flash just thinks the loop is set to infinity or something and pops open the error box.
I am trying to add a sound loop to my site and I have managed to get the sound to play and I can make two buttons start and stop. But how can I make 1 button that both starts and stops the sound?
Here What I have got.
Code:
var snd:Sound = new Sound(new URLRequest("dub.mp3"));
var channel:SoundChannel = snd.play();
var pausePosition:int = channel.position;
[code]....
Im trying to make a simple Image loop for a home page of a website.
I have flash loading the images dynamically thru loadmovie
the Images load fine, but they go on top of everything else.
Is there a way to get them on a lower layer?
I would like to create a loop so the icons in the menu continually loop indefinitly.[code]
View 2 RepliesI am attempting to use a loop to create text field with the loop's current value. The code looks like this:
ActionScript Code:
for (var i = 1; i<=10; i++) {
var 'nameHolder'+[i]+'_txt':TLFTextField = new TLFTextField();
'nameHolder'+[i]+'_txt'.x = 40
'nameHolder'+[i]+'_txt'.y = 40
'nameHolder'+[i]+'_txt'.text = "Hello World"
}
So essentially what it should do is create 10 text fields at 40, 40 with the text: "Hello World".
i'm trying to do an infinate loop for my m.clip.the looping part does not want to loop...it loops back to my firrst frame even though there are two same picture in the movie clip.....here's a sample of what i use for the infinate loop script..
[Code]...
I have need of loops / nested loops that pick different figures depending on where you are in the loop. The whole function needs to run through 'ml' times. 'ml' is a dynamic figure. Loop 1 = While the loop is within the first 12 iterations, 'exconemp' must equal 100. For iterations 13 - 24, 'exconemp' must equal 102.5, for 25 - 36 it will be 105.06, for 37 - 48 it will be 107.69. This needs to change every 12th iteration until it has reached 'ml'. The calculation takes the value of the previous 'exconemp' and then multiplies that by 0.025.
Loop 2 = While the loop is within the first 120 iterations, 'abc' must equal 0.015 and any further iterations must use 0.01. This must also work in a way to figure out whether 'ml' is higher or lower than 120 and work accordingly. My main issue is this - how do I get the loops to run through as this: While the iteration is < 12, do this, THEN take the final figure (12th iteration) and start on 13 - 24, do this THEN etc etc. How do I produce a THEN statement? I can get the code to pick up the final values, but not change along the way.
[Code]...
Say, I had a loop in a function...
[Code]....
How would I refer to a in another function
Should I declare the _mcContainer var before the loop or no? (performance increase?)
for(var i:uint = _startIndex; i <= _endIndex; ++i){
var _mcContainer:MovieClip = _mcParent["i_" + _position];
}
[Code]....
Recently I'd been criticized for structuring my for loops like so:
var i:MovieClip;
for each(i in array)
{
[Code]....
This reads better for me personally, yet I'm being attacked for it. Is there any difference?
basically I need a loop within a loop to compare two different arrays in my actionscript3 lottery game. I have attempted the loop but I cannot seem to get it to work ...
[Code]....
So basically within this code check_win is a button. Once the button is clicked it runs the loop. It is meant to take an instance of matches which contains 6 properties and loop until index is greater than matches. According to my output this is happening but the second loop doesn't appear to do anything.
How do i word a for loop to make it loop through multiple arrays?I want 1 for loop to loop through multiple arrays in order to move/alter objects.I want to keep the arrays separate.
ActionScript Code:
characters = new Array();
characters[0] = male;
[code]........
I'm trying to make a matching pairs game. First of all I'm making all the tiles, using a loop inside a loop. How do I get the ID of an item inside that loop? My code looks like follow:
Code:
var matches:Array=new Array(1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8);
makeTiles();
function makeTiles() {
[Code].....
dayVal = day.value;
for(dayVal = 1; dayVal/7 != 1; dayVal++)
{trace (dayVal);
}
the loop starts at 0 and not 1 so the loop ends at 6 does any one know how to resolve this issue?? its so that what ever number dayVal is it will be rounded up to a number that is Divisble by 7 .
Basically, I have data organized by date in an XML file. I'm trying to make a website application that will allow the user to click on a date (in a text field) to see another textfield populate with all the data under that particular date. So far, all the information loads into the textboxes at the same time. How can I get it to only load information under a particular date when somebody clicks on that date?
Before I started this project, I was convinced I could do this by manipulating the [j] (see code below) in the myFunc2 function. Currently, it's set up to increment blank_mc._y by whatever value is returned by [j]. But for some reason this doesn't work. I feel that if I could atleas get this part to work - I could probably do the rest.
AS code:
Code:
function loadXML(loaded) {
if (loaded) {
var nodes = this.firstChild;
[code]....
I have some code that seems to have a problem. I can't seem to pass the x variable from one loop to within another loop.
Code:
var myLv = new LoadVars();
var myNv = new LoadVars();[code]....
wondering if anyone knows if its possible to have a pause within a 'for loop' before it runs through the next loop? heres the script i've built up so far, i'm running off other variables and arrays to pull in the logos and the animating in is working fine except that they all run in at the same time, basically what i want is that they would run one after the other with a 5 second gap between them..[code]so i did that and put wait(delay); after the var boxcounter=2; in each of the If statements.. but no luck... can anyone shed any light? or suggest a way it get it to hold for a few seconds before running though the loop again? or am i going about this in completely the wrong way??!
View 5 RepliesI have a variable in a loop that i want to access in a function outside of the loop. However the variable gets deleted when the loop is closed so no longer exists when i call in the function.here is the code; i'm trying to access the variable picHeight from within the scroll function
Code:
pauseTime = 3000;
xmlImages = new XML();
[code].....
I'm trying to synchronize external subtitles with my custom video player - Not FLVPlayback.Subtitles are in XML object from 0 - 12.I created a Timer that is checking when the subtitle 0 should be displayed according to playback time.I want to reach that after subtitle 0 disappear the next subtitle 1 will be checked when should be displayed.So all I want is 0 + 1But it is Timer and the result after Subtitle 0 disappear is 0+1+1+1+1+1+1+1+1+1+1+1 ad infinity And thats too many as I only want once add 1.
View 1 Repliesi have tried to keep this as simple as possible in order to demonstrate my confusion - i have looked at this for too long now and i really dont understand how this for loop works - sorry for the example length.
[Code]....
i can fully see how things work up until i hit the FOR LOOP EVALUATION: child !=null at that point the loop is broken and the trace statements with xxxxx and yyyy come into play but why is there 4 lots of x and y traces? if the loop is broken and child = null which it does why does the statement carry on 4 more times - should it not just return? i understand that the update part of the for loop will execute only at the end of the loop but this still does not show why it should carry on like this?
Code:while (dayCount <= lastDay) // creates 30 text fieldsto a 'for' loop where I can increment the position of each duplicated text field by i * a specified width. the thing is that i can't figure out how to do that with my while loop. but i can do it with a 'for' loop. that's why i'm trying to change it. earlier in my code i use this 'for' loop to lay out the row above where i want to start..
Code:
for(var i:Number = 0; i < numCols; i++){
_root.createTextField("dayHeadings" + i, i, indColWidth*i, startSecRowYPos, indColWidth,
[code].....
making an intro for my site.Right now, it's coded in php, but I'd like to take it to flash.In the intro, (I fail at making images) I'd be making two characters that come in from off-screen and do a small fight. Then the winner gets shot with a bullet and dies.They fade out and then the site comes up.
View 1 RepliesIf you place a for loop in a recursive function with the function call within the loop... will the loop finnish or does it stop working untill the last recursion?
View 2 RepliesI have a custom flash intro and I do not know how to add it to my website and then make it redirect to my site.
View 14 Replies