I just recorded some song and cut it into two parts. The first part contains an intro and the second is supposed to loop. What I want to do now, is to have a simple graphical animation (5 keyframes or so) that loops as well, while the music plays along.
View 1 RepliesI'm totally to flash. How would I create an intro like this one? [URL]
View 1 RepliesI am trying to create a flash intro webpage similar to this: [URL]..I have got a AS2 code that allows me to
scale the video as seen here.... www.the10thletter.info/ebh/intro (seen code below)
I also have a AS3 script that positions the logo in the middle of the page (seen code below)
[Code]...
I have published my intro to my website I checked "Loop" and unchecked "Loop" under the Flash section of publishing no matter which I it continues to loop and not go to my website. This is the action I am using:[URL]...
View 1 RepliesI have a movie clip that I imported into flash, used a skin and have a nice little player for this website intro. I want to proceed to the sites home page upon completion of the movie. Searched but the best I could come up with was;
player.addEventListener("complete",function (event:Object) { trace("doneVideo");new URLRequest("my link");});
I needed to make a loop for a intro splash, and since I have only programmed in php before, I tried this (to my suprise it didn't give a syntax error):
Code:
count=0;
if (count < 5) {
gotoAndPlay(40);
[Code].....
I made a 2 frame flash. The first frame has a container that holds the movie clip, masks, audio & transitions for the intro. This frame I only want to play once. Then I want it to advance to frame 2 upon completion. Frame two is a leader/score board that will hold score tallies (it is linked to a TXT file that is linked to an ASP, which has not been completed yet), and therefore, it needs to loop into infinity. When I have the FLA open and I press CTL + Enter the intro plays then automatically advanced to the 2nd frame which loops to infinity.
(This is perfect -- this is how I want it to perform). When I go to the folder where the SWF and EXE are published, and I double clidk to open either one of them up, the intro keeps looping and never advances to the 2nd frame. I have to manually press next frame on the pull down menu -- and that is not feasible since this leaderboard will inevitably end up on a big monitor with an audience. Here is the link to the file: [URL].
First, I am an ultra newb who has read about 50 tutorials in the past two weeks or so.So, here is what I am trying to do. I have a header navigation box in my flash page. I want, when someone opens the page, for an animation to play. Then, I want it to stop and display my menu.
What I have done: I created two frames and put my animation in one inside the movie clip. The second frame has the menu. When I try to test it, The frames flicker and the animation doesnt play.I tried putting stop() at the end of both frames. This just made it...not do anything and just display the menu.
A friend suggested putting "root.gotoAndStop(2);" at the last frame of my animation, but then I get an error.
In this website there's an intro. Now, the website is about a lingerie company here in Italy...so it's like a based fashion website. I'm going to create the intro with after effects...what do you think about this? How do you create your intros? With after effects? do you have some fashion website link with an intro?
View 6 RepliesI want to create a short intro for a music video using digital pictures, as I don't have a camera.[URL]
View 1 RepliesIf I have an FLV that I've output as SWF with skin to have embedded into an HTML page, and now a 'skip intro' is needed - though I'd have to make note of the actual time or keyframe in which the intro completes...How is this possible? Clearly, a button would need to be added for that kind of interactivity?
View 3 RepliesI would like to create a loop so the icons in the menu continually loop indefinitly.[code]
View 2 RepliesI am attempting to use a loop to create text field with the loop's current value. The code looks like this:
ActionScript Code:
for (var i = 1; i<=10; i++) {
var 'nameHolder'+[i]+'_txt':TLFTextField = new TLFTextField();
'nameHolder'+[i]+'_txt'.x = 40
'nameHolder'+[i]+'_txt'.y = 40
'nameHolder'+[i]+'_txt'.text = "Hello World"
}
So essentially what it should do is create 10 text fields at 40, 40 with the text: "Hello World".
I'm attempting to create a graphical representation of the microphone activity in flash for a conference.
I got a movieclip called eqNotch that's just a rectangle and its linkage name is EqNotch.I also have a movieclip where I am writing my as3 on the first frame, its called dynamicBar and linkage name is DynamicBar.
I've successfully written the code for the dynamicBar to create one column of eqNotches and the number of rows is dependent on mic activity.[code]...
I have the code below but I need to generate it with a for loop. What is the proper way to do this? I don't initially know how many points i will have. I just want to create a for loop to loop through a variable that holds the point count such as "var totalPoints=10"
//1
var p1oint = new Point();
points.addChild(p1);
[code]......
a client hosts numerous sites at MT, I've built a few Flash sites that exist on his server. For some reason, the server is over-running due to an internal loop that is basically the domain requesting itself over and over. can this potentially happen via the player itself somehow making numerous requests.
View 2 RepliesI have this world map (.swf file) that I want on my home page(black background). It's up and working fine, but it flashes a white blank map for about 2 seconds when it first loads and then it goes away. It looks very ugly on a black background and gives off a sense of "cheapness". Anyway, it has got to go. I purchased the world map and they don't offer access to the original .fla file. So basically I want to know how to cover up the first few seconds of the video with black and then have the black cover disappear and let the flash file do its thing.
View 1 Replieskinda having some trouble with flash movie I created. It keeps wanting to loop and play over and over. I just want it to play once in my html page and then after the first play, change into another html (iframe). Any ideas? I'm using dreamweaver and adobe flash.URL...
View 3 Repliesim trying to make this intro and ive searched a bunch of tutorials, but i cant seem to find what im looking for..maybe im not searching the correct term, this is what im trying to do... i have a map and i want the dashes to appear one after another in sequential order so it shows movement.
View 3 RepliesI've created a flash intro for a website and I have it setup so that in the first frame of the intro it opens a popup window, and then in the last frame it opens the actual site in the same window as the intro. Right now when it hits the last frame it opens up the popup window again also! Ack! The code I've used for opening the popup window is:var url:URLRequest = new URLRequest("player.html"); navigateToURL(url, "_blank");
the code used in the last frame to move to the site is:var urlReq:URLRequest=new URLRequest('index2.html');navigateToURL(urlReq,'_self');
I'm guessing that it has something to do with re-using the same variable name. I tried changing the code in different ways on the second window opening but still had the same result, or broke it opening up any pages at all. I've also tried moving the two code snippets to different layers. I'm thinking there might be a few ways around this too such as if there is a way to trigger the popup window, and then have the intro wait x seconds and then opens the main site or something, but I have no clue how to go about doing any of this. have the site in question in a temp location currently and it can be viewed here: [Url]
Anybody can tell me how to do this? after the intro in flashcs4 go directly to a website. I made an intro in flash and after the end of the clip need go to a html doc. I've to use ActionScript right?
View 7 RepliesI bought a flash intro for my website, I edit it, then I go to save it which works. When I try to re-open my saved file, Adobe Flash crashes. why it keeps crashing whenever I go to re-open the project.
View 1 RepliesI have a custom flash intro and I do not know how to add it to my website and then make it redirect to my site.
View 14 RepliesI just got this flash intro and everytime I take into CS5, it says could not load,may be damage.The intro isnt damaged at all.How can I get my intro to load,so I can edit text? If I can get it to load how do I go about editing the text?
View 3 RepliesI'm going to publish my flash intro for our website but can I just publish it without using Dreamweaver? I want to make my flash intro always centered vertically and horizontally according to the browser's size. I also want it to have a plain black background and not showing the edges of my flash.
View 1 RepliesI was asked to edit a completed website. I was given the .swf file. I decompiled it using SoThink and converted it to a flash file. When I opened it in Adobe Flash CS4, only the intro portion is viewable in the timeline.
When I test the movie the entire website plays out with no problems. But the timeline only shows the intro/home page. I need to edit other content in the scene.
i have imported a movie that i created in After Effects and exported as an FLV. I imported this into flash as an embedded FLV file. When i go to the last frame and enter the scipt.......
stop();
getURL("http://www.randolphmusic.net/main.html", "_self");
it tries to go to the url before i play the movie.
If i try to make a keyframe there i get a message and it cuts the end of the video at the point and starts it over a second clip in that same timeline. I have tried creating a tween from it then putting in the script, i have also tried this with a classic tween.
I am trying to do something I thought would be very simple. It has turned into a much more difficult exercise. I simply want to use this flash movie at Code:[URL] as an index page of site. When the movie has ran, I want to pause for 3 or 4 seconds and then go to the next page of web site (in other words, go to a specific URL).
View 2 RepliesI have a corporate flash-file which is pretty advanced, much more so than I could have developed myself. The company want this flash to have an intro screen before the actual content starts with a button choosing what of two parts to load. [code]I've tried with adding a frame before the actual content, adding an extra scene and loading the swf from another one. Nothing have worked so far and I am running out of ideas. The .fla-file only really consists of a background, some shadows since the actionscripts, images and other resources are external.
View 1 RepliesI am new to flash and trying to make a simple flash website video intro in Flash CS5 Pro.I have a flv viedo on the stage, under an image with a trasnparent center.I have the video on the bottom layer, the overlay image on the middle layer, and the top layer is my AS layer (AS3).
The video is currently autoplaying when i export.All i want is for it to open my website in the same window as the intro played when the video ends.I dont need a "skip intro button" or anything.I just want it to play the intro when you go to my site, and then bring up the index page of my site after it plays.