If I have an FLV that I've output as SWF with skin to have embedded into an HTML page, and now a 'skip intro' is needed - though I'd have to make note of the actual time or keyframe in which the intro completes...How is this possible? Clearly, a button would need to be added for that kind of interactivity?
View 3 RepliesI make two flash project and I export it swf
1- intro
2- home page
I want to add skip intro button to open home page otherwise I want the intro jump to home page when finish.so i add button on intro (skip intro) and write the following:
this.createEmptyMovieClip("homee",1); by the way i cant understand what this number meanhomee.loadMovie("home.swf");but what happened is that the intro still looping in home page
I have created a flash intro for my website. I have (2) buttons (1) Skip Intro (1) Volume.When I publish to HTML both button are not seen.
View 3 RepliesI've created a preloader.swf that (when loaded) loads an external swf. I would also like to add a skip intro btn, but when I do, the preloader seems to loop over and over (blinking - I know, high tech). This is the preloader code. I have it in the first frame of the preloader.swf:
[Code]...
I've created a preloader.swf that (when loaded) loads an external swf. I would also like to add a skip intro btn, but when I do, the preloader seems to loop over and over (blinking - I know, high tech).
This is the preloader code. I have it in the first frame of the preloader.swf:
stop();
var myRequest:URLRequest = new URLRequest("flash/index.swf");
var myLoader:Loader = new Loader();
[Code].....
I'm making a flash project and I have 10 different videos on it (embedded using FlVPlayback) and all the videos have the same stupid intro. My boss would like me to add a "skip intro" button which would allow you to jump to about 19 seconds in the video.
what I have done so far is insterted a video file without the introduction in a new keyframe and have the "skip intro" button linked to keyframe.the only problem is that if you do not wish to press the skip intro button, it stays up on the screen the entire time, and we would like it to disappear. I've thought about using skipintro.alpha = 0 at a cuePoint located 19 seconds in, but i'm not really sure how that would work.
I have created an animated home page that I have put a "skip intro" button. When the viewer clicks on the skip intro button I want them to go to the end of the animation/homepage. There are three embedded movie clips of test tubes filling (near the end of the main timeline and these testubes are also navigation buttons to the rest of the site). Even though the viewer goes to the end of the main timeline when they click SKIP INTRO, the testtubes fill at this point and the animation loops back to frame 1 and keeps looping. I want viewer to stay at last frame with all testtubes filled and animation complete. I'm guessing it's something in the individual testube clips AS that is causing this or some simple solution that I'm overlooking? I published an html file and when I tested in a browser and DON'T skip the intro animation it goes through the full animation - to end and stops and does not loop.
[Code]...
I've created a preloader.swf that (when loaded) loads an external swf. I would also like to add a skip intro btn, but when I do, the preloader seems to loop over and over (blinking - I know, high tech).
This is the preloader code. I have it in the first frame of the preloader.swf:
stop();
var myRequest:URLRequest = new URLRequest("flash/index.swf");var myLoader:Loader = new Loader();
myLoader.load(myRequest);
[Code]......
I have created a preloader for a video intro, with a skip button. This preloader is loaded inside the index.html file.When the user skips the intro video, he is forwarded to another page. This part works great.The problem is that if you ever go back to the index.html file after you skip the intro the flash file recognizes that the video is already downloaded, because it is partially downloaded because it begins to download before the user can press the 'Skip' button. I imagine this has to do with the fact that a partial file with the same name exists in cache.When the user clicks on the 'Skip' button I close the loader that was loading the video file like this:
loader.close();
Is this the problem? I thought that Flash automatically compared files.Is there any way to compare the file in cache on the users computer and have the file either resume or redownload if the file sizes don't correspond?
using a shared object to detect the last visit of a user, and if it is within 24 hours, skipping the intro on a flash site?
View 2 RepliesI am building a website for a project of the university. as i am not a programmer i bought a template from flashden. i need to do some adjustements and alleready asked the author to help, but he has no time to do. i thought maybe i'll get some help over here.
I need a fullscreen video as an intro for that page. there should be a skip button and when the video has finished playing you should get to the page... the page uses a percentage preloader and i want the same preloader for the video, so that it looks like it belongs to the page.
Hopefully you guys can see something i am missing. I want to skip the intro of the flash movie after the first visit, so the user doesn't have to see the intro to get to the main site.
I have the code below on frame 1, an intro flv on frame 2 and the main site on frame 3. Code seems perfect and straight forward, why is it not working for me. I had a stop(); on frame 2 and 3 but I removed them to see if that would fix it, but no luck.
[Code]...
I want to skip the intro of the flash movie after the first visit, so the user doesn't have to see the intro to get to the main site.
I have the code below on frame 1, an intro flv on frame 2 and the main site on frame 3. Code seems perfect and straight forward, why is it not working for me. I had a stop(); on frame 2 and 3 but I removed them to see if that would fix it, but no luck.
Code:
_so = SharedObject.getLocal("skipIntro");
_introcheck = 0;
if (_so.data.introcheck != _introcheck) {
[Code]....
I want to skip the intro of the flash movie after the first visit, so the user doesn't have to see the intro to get to the main site.
I have the code below on frame 1, an intro flv on frame 2 and the main site on frame 3. Code seems perfect and straight forward, why is it not working for me. I had a stop(); on frame 2 and 3 but I removed them to see
Code: Select all_so = SharedObject.getLocal("skipIntro");
_introcheck = 0;
if (_so.data.introcheck != _introcheck) {
_so.data.introcheck = 0;
[Code].....
I have an issue with an intro I'm doing. I have made animation which is around 200 frames and in the main timeline, so that it starts when you load the page. I want the user to be able to click anywhere on the screen to skip this intro as it takes a while to load on slow connections. At the moment I have made a large button on a layer under the animation which only works as a button when you have loaded the page into the cache and not the first time you load it.
View 6 RepliesI'm a beginner level student. My project is to create a Splash Intro and a 4 page Website (Home page and 4 internal pages). I have to use Flash (no HTML, Java, CSS, etc). We are using Flash CS3 with Action Script 3. The Splash Intro should play continuously. This part I have working like a charm. However, the project requires a Skip Intro button. I have made the Skip intro button and gave the "instance" a name. The next part is where I'm stuck. I want to be able to click on the Skip Intro button and go to the first page of my "Website." I have all of my pages on one timeline. No movie clips. This is very basic.
My Home page has some animation on it. My name comes in from the left and three buttons come in from the right. When the user clicks on the Skip Intro button, I want it to go to the Home page, play the brief animation and STOP. I don't want the Skip Intro button to just go to frame 40 (for example) and just stop. And, if it goes to frame (50) for example and stops the user will miss the animation (right?). Here is what I have but it doesn't work:
[Code]...
I have an external SWF file and when I click on a "skip intro" button, right now I have a StopAllSounds(); on an onclick, so it stops the sound of the external swf, is there a way to fade out the sound instead on an onclick of an embeded sound on an external swf?
View 1 Repliesi've imported a flv video file to Flash for the intro and i create skip button to go next frame..but when i press skip..it stop at next frame but the sound of intro still playing.
View 3 RepliesI have a movie clip that I imported into flash, used a skin and have a nice little player for this website intro. I want to proceed to the sites home page upon completion of the movie. Searched but the best I could come up with was;
player.addEventListener("complete",function (event:Object) { trace("doneVideo");new URLRequest("my link");});
I've been working with Photoshop for years but recently started using dreamweaver to build sites.I want to make a flash intro for the site I am currently working on and have never used Flash before.I am looking to make a simple flash intro with no buttons and have it automatically cycle through the images I have.I'm looking for a tutorial to make an intro like the one on this page: http:[url]....
View 1 RepliesI need a skip intro link in my movie that, when clicked, goes to the last frame of the movie and plays it.
View 7 RepliesIn the timeline I have a main menu on frame 1 and four subsections on frames 10,20,30, and 40. I have four buttons on the main menu label("button001"; "button002";"button003", and "button004"), each one is sending the movie to a specific label (i.e: "section001", frame 10; "section002", frame 20; "section003", frame 30; and "section004", frame 40). In each one of those specific frames/labels (10,20,30,and 40) I have a movie clip that contains the section. It starts with a simple animation and ends in a stop. And this is what I want to do: play the animation just once.
Let's say in the main menu; when pressing one of the four buttons, the movie goes to one of those specific frames and the animation starts. For instance, I press "button001" and send my movie to the "section001" label. Then I return to the main menu and press again the "button001"; I don't want the animation to play again, I want to start in the stop point. So, I think about using some kind of conditional, but it's not working. Inside the "section001" movie, I put the following code on the first frame:
ActionScript Code:
stop();
var section001_intro = false;
if (section001_intro = true){
//"section001_stop" is a label I put on the last frame of the movie clip
gotoAndStop("section001_stop");
}else{
nextFrame();
}
Then on the last frame, when the movie stops, I wrote this code:
ActionScript Code:
var section001_intro = true;
So, my idea is that the first time the movie is played, the animation is played; then, I indicate in the last frame that the move has been played. next time I go to the "section001" label the movie must skip the animation and go directly to the "section001_stop" label.
I am new to flash and trying to make a simple flash website video intro in Flash CS5 Pro.I have a flv viedo on the stage, under an image with a trasnparent center.I have the video on the bottom layer, the overlay image on the middle layer, and the top layer is my AS layer (AS3).
The video is currently autoplaying when i export.All i want is for it to open my website in the same window as the intro played when the video ends.I dont need a "skip intro button" or anything.I just want it to play the intro when you go to my site, and then bring up the index page of my site after it plays.
for some reason my first attempt to post this didn't work so i will try again, and do it better this time... I would like to have a flash intro that then turns into the header/banner (size wise) with my (html) site loading below it. I'm not sure if this is possible or how to go about it, the idea is that it looks very fluid and slick.
View 4 RepliesI'm creating a flash intro and i was wonder how i would set it up so that the intro only plays the first time the viewer views the website. so that the next time they visit it takes them directly to the main page. this is dealing with cookies b/c once they clear their cookies it would play again.
View 5 RepliesI am making a website and i want a flash. Here's what i want it to do.
1) The page has two images "Enter" and "Here" together. When you click it with mouse, the two images fly in opposite directions and fade away.
2) After that screen turns bright.
3) An Image fades in which i will use to map different locations using HTML.
im trying to make this intro and ive searched a bunch of tutorials, but i cant seem to find what im looking for..maybe im not searching the correct term, this is what im trying to do... i have a map and i want the dashes to appear one after another in sequential order so it shows movement.
View 3 RepliesThough many people before me have asked the same or similar question, I can't find any satisfying answer in these discussions. Note that I'm quite new to working with Flash.
I have made an intro with Adobe Flash using ActionScript 2.0. This intro consists of 82 frames. I want to play my intro once to people visiting my website and subsequently (when the visitor of my site sees frame 82) the browser has to be send to the real mainpage of my site. I already know how to import flash to my site and to name it index.html or index.php and so on.
I just need to know how to create this intro playing once and redirecting to another page and predominantly which codes I'll have to type in my Actions-window (F9).
I needed to make a loop for a intro splash, and since I have only programmed in php before, I tried this (to my suprise it didn't give a syntax error):
Code:
count=0;
if (count < 5) {
gotoAndPlay(40);
[Code].....
I have designing my website with Dreamweaver and am wondering how exactly I can make a non-interactive slideshow for my main page, preferably in Flash or Fireworks. I want the slideshow to begin each time the main page is loaded. I have been using Simple viewer to make my galleries because I don't know html, I'm a photojournalism major and happened to get the entire cs4 suite with my macbook. I'd like to learn to put more than PS and Indesign to good use.
View 1 Replies