I am trying to do something I thought would be very simple. It has turned into a much more difficult exercise. I simply want to use this flash movie at Code:[URL] as an index page of site. When the movie has ran, I want to pause for 3 or 4 seconds and then go to the next page of web site (in other words, go to a specific URL).
View 2 RepliesI have a movie clip that I imported into flash, used a skin and have a nice little player for this website intro. I want to proceed to the sites home page upon completion of the movie. Searched but the best I could come up with was;
player.addEventListener("complete",function (event:Object) { trace("doneVideo");new URLRequest("my link");});
wondering if anyone knows if its possible to have a pause within a 'for loop' before it runs through the next loop? heres the script i've built up so far, i'm running off other variables and arrays to pull in the logos and the animating in is working fine except that they all run in at the same time, basically what i want is that they would run one after the other with a 5 second gap between them..[code]so i did that and put wait(delay); after the var boxcounter=2; in each of the If statements.. but no luck... can anyone shed any light? or suggest a way it get it to hold for a few seconds before running though the loop again? or am i going about this in completely the wrong way??!
View 5 RepliesIf I have an FLV that I've output as SWF with skin to have embedded into an HTML page, and now a 'skip intro' is needed - though I'd have to make note of the actual time or keyframe in which the intro completes...How is this possible? Clearly, a button would need to be added for that kind of interactivity?
View 3 RepliesI have a timeline of 30 frames, each it's own mc (page01_mc, etc.). In each mc I show a picture or two and hear narration.I have a first, prev and next nav on the main timeline. I need to add a play/pause btn that will pause both pictures and sound. I assume I do that in each mc, but do not know where to find the code.Here is what is in each mc now:
var mySound:Sound = new Sound();
mySound.load(new URLRequest("english/Intro01.mp3"));
mySound.play()
I was in the middle of developing a Flex applcation, and then I recently switched from Windows XP to Mac. My app is noticeably less responsive on my Mac than on Windows, and today I proved it's not a hardware issue, because I ran the App on my Mac and a Window XP on Virtual Box side by side, and IS much more responsive on XP. Things like repainting in response to window resizing, selecting/unselecting list items, scrolling up and down(I do have complicated list-item-renderers). Has anyone seen this as well? Is flex/flash just not as well supported on Mac? Or are there tweaks I can do to improve performance on the Mac?
View 3 RepliesAllaboutrajini site tells you to stop your Internet connection to enter the site.I guess it determines whether the connection is on or off with javascript or something like gmail and qoura do.
But how can they store so much of flash animated content locally in the browser in such a short time?
I 'm working in a flash website and I used a background music that runs while the flash file is playing, I used action script codes to run this music. Also, I used some simple sounds that plays when the user move his mouse over a button or some items, but I imported these sounds to its frames directly and I didn't use action script to run it.The problem is that I want to make a "MUTE" button to stop all sounds, but the background music only stopped because it was runned through Action Script, other buttons will produce the same sounds when moving the mouse over them Does anybody have an action script code to mute all sounds even if they were imported to frames directly??
View 2 RepliesHow can I get a Flash timer that runs? But I need the numbers to have a specific font, so does that make it trickier?
View 14 RepliesI am having an issue with Flash not running in Firefox but it is running in IE and Chrome. The main url is [URL] on which there is a section called "ROI Calculator". The download button links to a flash program which opens up in IE and Chrome but does not open in Firefox. I am using windows 7 professional and Firefox 8. Here is the code for the page [URL]:
<!-- saved from url=(0014)about:internet -->
<html lang="en">
<!--
Smart developers always View Source.
 
[code]....
recently i am working on my portfolio which I am doing in flash cs4, as3. It runs fine on local machine but when i upload it into the server, it runs very slow. in face there is a section where pictures are loaded when a thumbnail is clicked. There are 15 pictures and it doesnot opens at all.
following is the link to the site that I have done so far[URL].. please click on the "projects" to look at the problem I am mentioning. the section"3d modeling is the part where there are 15 pictures and doesnot load at all. same problem with "3d animation" "video editing" works fine. it may be because it has just one video to load.
I checked the forum and couldn't find an idea on this.I have a Flash .exe and also a MAC .app for my project. I need to autorun these when the CD is inserted.If it were a single .exe and if i wanted to load it in windows machine it would be a piece of cake.But I have 2 files, and I wanna load it from a single CD. If the system is Windows I want it to load the .exe, and if the user system is Mac i want it to load a .app. How do I program the .inf file now?
View 1 RepliesOk my Flash movie tests and runs fine on i publish preview it in Flash, but when i upload it to server it is not working like it is supposed to. is there a way to debug it or trace what is happening while it is running??
details: i have 113 Dynamic text fields names tcname_1 --> tcname_113 i have 113 buttons named button_1 --> button_113 The dynamic textboxes get their data from a file named trees1.txt
i tried changing three of the text boxes to use device fonts but that didnt make a difference
here is my AC3 code :
// button links: to all buttons to open in iframe 'tdes'
// link corrosponds to button number
// i have 113 buttons.
[Code]....
I have made a plattformgame in flash, and after I had published it I tested it (local) when it was embedded in a browser, and it hacks and laggs! But when I play it in the flash player it works just fine.
I removed all the heavy graphics, lowerd the fps to 30fps and removed all the code so now its just the bassis left (gravity, collision, key checking etc. and yes u should bounce on the walls giving a wall jump effect).[URL]
The Flash movie runs correctly with the preloader when it is run inside Flash. When I upload to IE, the preloader doesn't run.
View 2 RepliesIf I load a swf in FlashPlayer standalone, it will play nice and smooth. If I load the HTML it's embedded in (with SWFObject) in a browser it stutters like hell. If I use my browser to open the swf on its own, that runs nearly as smooth as in the standalone player.
That the standalone player runs smoother is understandable, since it then doesn't need to go through the browser layer. A slight performance decrease when adding the HTML DOM layer is also understandable, but in my case the difference is huge!
If I were to guess:
Standalone: 100% (benchmark)
SWF in browser: 90%
SWF in HTML in browser: 30%
I would like to know if it is possible to run Action Script Communication Files(.asc) on an red 5 server, just like how a .asc file runs in the Flash Media Server.
View 1 RepliesBasically what happens is 5 eggs fall from the top of the screen. What I'm trying to have happen is, to have flash recognize when all 5 have been clicked and goto and stop on frame 3. The other problem is I want the animation to reset when the timer runs out. Thus clearing all current eggs off the stage. I've zipped the 2 files I'm working with the (fla and as files).
View 3 RepliesI have problems with flash games and some advanced flash applications.Problems occurs regardless of browser.My computer is next:CPU: 2.8GHz hyper threadRAM: 1.5 GB (3 pieces)GPU: Nvidia 7600 GS Gigabyte.When it runs some flash game e.g. Facebook Pet Society, CPU load goes high as 80 to 100 %. It is very annoying thing since I am starting to loose my mind how to solve this.All other applications are running very good. This means games, 720p HD videos etc etc.
View 1 RepliesI made a project (learning courseware for kids) in flash MX and want to distribute on a CD. what I want is When user runs the course it (.htm or script) should check whether flash player is installed or not. If its not there then it should prompt the user to install it which I m planning to distribute in my CD but I dont have any idea how can it be done...
View 1 RepliesI've been trying to find a method of increasing the resolution of an executable that runs off flash. To be specific the program is a game called 'Realm of the mad god' originally a browser game but is now also a free to play steam title, Having browsed through the config files I couldnt find anything talking about resolution and I was wondering if there are any advanced flash features that allow the user to force the application to run a specific resolution.
PS: I don't have the highest hopes but I thought if anybody knew it would be someone from the flash community.
I've created a small game with Box2d for AS3 - I have sprites attached to the stage that take their position from the underlying Box2d world. These sprites are mostly PNGs.When the game runs with DrawDebugData() bening called every update, it runs nice and smoothly. However when I comment this out, it runs choppily. In both cases all my sprites are being rendered. So it seems that it's running faster when it's drawing the debug data additionaly (i.e. my sprites are on the screen in both cases!)What's going on? Does drawing the debug data flick some sort of 'render quick' switch? If so, what's the switch!? I can't see it in the Box2D code.
function Update(e){
m_world.Step(m_timeStep, m_velocityIterations, m_positionIterations);
// draw debug?[code]...
Interestingly, If i set the debug draw scale to something different to my world scale, it slows down to 19fps. So there's something happening when it draws the boxes under my sprites causing it to run quicker..
I have this world map (.swf file) that I want on my home page(black background). It's up and working fine, but it flashes a white blank map for about 2 seconds when it first loads and then it goes away. It looks very ugly on a black background and gives off a sense of "cheapness". Anyway, it has got to go. I purchased the world map and they don't offer access to the original .fla file. So basically I want to know how to cover up the first few seconds of the video with black and then have the black cover disappear and let the flash file do its thing.
View 1 RepliesI'm totally to flash. How would I create an intro like this one? [URL]
View 1 Replieskinda having some trouble with flash movie I created. It keeps wanting to loop and play over and over. I just want it to play once in my html page and then after the first play, change into another html (iframe). Any ideas? I'm using dreamweaver and adobe flash.URL...
View 3 Repliesim trying to make this intro and ive searched a bunch of tutorials, but i cant seem to find what im looking for..maybe im not searching the correct term, this is what im trying to do... i have a map and i want the dashes to appear one after another in sequential order so it shows movement.
View 3 RepliesI've created a flash intro for a website and I have it setup so that in the first frame of the intro it opens a popup window, and then in the last frame it opens the actual site in the same window as the intro. Right now when it hits the last frame it opens up the popup window again also! Ack! The code I've used for opening the popup window is:var url:URLRequest = new URLRequest("player.html"); navigateToURL(url, "_blank");
the code used in the last frame to move to the site is:var urlReq:URLRequest=new URLRequest('index2.html');navigateToURL(urlReq,'_self');
I'm guessing that it has something to do with re-using the same variable name. I tried changing the code in different ways on the second window opening but still had the same result, or broke it opening up any pages at all. I've also tried moving the two code snippets to different layers. I'm thinking there might be a few ways around this too such as if there is a way to trigger the popup window, and then have the intro wait x seconds and then opens the main site or something, but I have no clue how to go about doing any of this. have the site in question in a temp location currently and it can be viewed here: [Url]
Anybody can tell me how to do this? after the intro in flashcs4 go directly to a website. I made an intro in flash and after the end of the clip need go to a html doc. I've to use ActionScript right?
View 7 RepliesI bought a flash intro for my website, I edit it, then I go to save it which works. When I try to re-open my saved file, Adobe Flash crashes. why it keeps crashing whenever I go to re-open the project.
View 1 RepliesI have a custom flash intro and I do not know how to add it to my website and then make it redirect to my site.
View 14 Replies