Basically what happens is 5 eggs fall from the top of the screen. What I'm trying to have happen is, to have flash recognize when all 5 have been clicked and goto and stop on frame 3. The other problem is I want the animation to reset when the timer runs out. Thus clearing all current eggs off the stage. I've zipped the 2 files I'm working with the (fla and as files).
View 3 RepliesHow can I get a Flash timer that runs? But I need the numbers to have a specific font, so does that make it trickier?
View 14 RepliesWhat is the difference between Timer.stop() and Timer.reset() functions because it seems that the 2 functions do the same thing? I image Timer.stop() to stop the timer and when Timer.start() is called the timer starts from where it stopped. For example, if I have a 3 sec. timer (3000 ms). If I stop the timer after 2.5 sec. and start the timer again, I would expect the timer to expire/trip within .5 sec.
View 1 Repliesso I've got a working Timer, which will stop() when I call it to and start, but I can't get it to reset(). It just starts from where it left off.Code for the timer
package
{
import flash.display.MovieClip;
[code].....
I have made a plattformgame in flash, and after I had published it I tested it (local) when it was embedded in a browser, and it hacks and laggs! But when I play it in the flash player it works just fine.
I removed all the heavy graphics, lowerd the fps to 30fps and removed all the code so now its just the bassis left (gravity, collision, key checking etc. and yes u should bounce on the walls giving a wall jump effect).[URL]
I'm attempting to make a code which disables two tweening buttons while a timer runs. The timer starts when you click one of the buttons, and stops after two seconds. For some reason though, it isn't working, and I can't figure out why.
Code:
//import fl.transitions.Tween;
import fl.transitions.Tween;
import fl.transitions.easing.*;
[Code].....
If you were to open a fire fox browser and check out http://173.203.200.81/ you would see a really fast animation all based of arrays that are called in a timer event. If you open the same page in IE it runs slow.my timer event runs one function so it can run very fast. It looks like in IE the timer is based off of frames per second more than the set value of the timer.
View 9 RepliesI have 2 overlapping movieclips on the stage. Both are instances of the same movieclip, but with different names. One bigger then the other, due to a magnifying effect. (I have tried to out-rule that code by the way, so its not that). The intention is to make both movieclips play when the mouse is over the stage and then stop as the mouse leaves the area. Seems simple and I have done that alot of times with other animations.
[Code]...
Ik got a game with a timer. When the game is finished you can play it again and the SWF file loads again. Everything is reset exept the timer. A new one starts but the old one is on the background.
The timer is the only code thats on the timeline..
I cant get the timer working in my AS file...
This is the code on the timeline:
Actionscript Code:
var timer:Timer = new Timer(60, 1000); timer.addEventListener(TimerEvent.TIMER, countdown);timer.addEventListener(TimerEvent.TIMER_COMPLETE,
[Code].....
I have set up the timer and it counts down correctly.how to get my timer to do an automatic reset once its down to 0.
Quote:
import flash.utils.Timer;
import flash.events.TimerEvent;
/*This creates a new timer object, that fires every 1000 milliseconds (each second), and will fire 10 times after it is started, then stop. Next we will create an event listener that will catch the Timer event, and call a function "changeText".*/
var alienTimer:Timer = new Timer(1000,10)
// declare an integer that starts the timer at 10! this shows the seconds left on the timer
var secondsLeft:int = 10;[code]................
how to reset timer back to zero I have a button in the parent timeline of the code below and when I click it I want the behavior of the time will go back to 1 or 0. Button clicked, timer back to 1 or 0.
[code]...
I am trying to play sounds in my Flash gameAt times, the game runs slowly and the sound effects began to lagI noticed that all of the sound effects that are played using AS3 sound and soundChannel objects (which are held in an array and are triggered by a Click Event listener function) are lagging worse that sound effects which are played from within MovieClips timelines (These MovieClips are played using gotoAndPlay() which is called by a different Click Event listener function.) I am wondering why this is happening. I assume that anything done within Actionscript would be processed faster that anything done on a timeline.
View 0 RepliesHow would I get a timer function to reset after no buttonswere pressed for 3 minutes?Right now I have my timer starting on load, and then when abutton is pressed, it stops it. I basically want to restart itafter 3 minutes.
the code I have:
[PHP]var timer:Timer = new Timer(5000);
timer.addEventListener(TimerEvent.TIMER, playSlides);
[code].....
I have an increment timer on a game I have created, but the thing is it refuses to reset at the end of the game.If I do timer.reset(); it is not visible then if I cal timer.start(); immediately after, it will continue from it's former position at the end of the 8th level.It's really annoying me as it's the only thing that won't seem to reset, everything else is fine.
function incrementCounter(event:TimerEvent) { count++; var whole_value:int = int(count / 100); var tenths:int = int(count / 10) % 10; var hundredths:int = int(count) % 10; gamePage.timer_txt.text = whole_value + "." + tenths + "s"; }
Since my project uses class actionscript files my whole game project runs on one frame and nothing is on the maintimeline so there is only just one frame on the timeline. Just wondering how I could make it so that I could have the first frame with game instructions and a description which then goes into the game being second frame and when gameover goes to third frame using actionscript. or any tutorials or some peice of advice
View 3 RepliesI am attempting to make a Flash AS3 trivia game using dynamic text fields, movieclips and XML to store the questions, but I'm struggling with the timer. I got the timer to function, when the user does not answer a question to to play the next question. However, I am having a problem, I am getting an error message. I have pasted the error message, along with the code I am using below.
[Code]...
I have made a counter but i want it to reset 3 times a week at specific days of th week. I want it to reset first every Tuesday at 9:45,Every Thersday at 18:00 and every Saturday at 12:00
View 3 RepliesI have a kiosk set up to load external swf's, and to keep them up as long as they are being played with. Once the swf sits for two minutes without being touched it goes back the attract sequence, which leads to the menu, where you pick your swf...
I am having trouble with the timer I have set to restart the program. I have it set up to reset and start the Timer whenever the stage is clicked, which works fine the first time you open the swf. But if you exit the swf, and later it is opened again, it will restart after two minutes whether it is in use or not. Does anyone know what might cause this?
[Code]....
Having a little issue here with TIMER, basically I am looking for the timeline to advance 1 frame after 3 seconds, OR on MouseEvent.CLICK advance to next frame (before the 3 seconds it up). Which would then reset the TIMER. So, on CLICK go to next frame, OR wait 3 seconds and go to next frame (while having the TIMER reset both times). So...
Wait 3, (timer resets) wait 3, (timer resets) CLICK, (timer resets) CLICK, (timer resets) CLICK, (timer resets) wait 3, (timer resets)wait 3, (timer resets)CLICK, (timer resets)CLICK... You get the idea.My issue is the timeline, over time the TIMER time doubles, it doesn't reset... I am sure this is pretty basic and I am over thinking.
[code]...
I don't get exactly how they do the whole preloader animation on: http://www.flashlevel.com/indexv4.html
every time i visit the page the whole preloader animation runs for 0 till 100. also if it is in your cache.
they use 20 stripes to load so (5 percent means 1 stripe!) but how can you animate your preloader if youre preloader does'nt always runs smoothly from 1 till 100?
Try to wrap my head around why sometimes a timeline base animation will run choppy in some browsers. Is it processor speed vs frame rate. I boosted my framerate to 29.97 but on older computers the animation is very arthritic.
View 1 Repliesi am having a problem with my flash animation game timer and nothing seems to work
i want it so that when the time reaches 60 seconds and the score is over 200 it will go to the frame gameWon if its below it will go to gameLost. i also am struggling to make the timer show up on the animation game.
[Code]....
've created a simple flash game for moving a car round the flame to collect fuel cans and avoid traffic cones. The game has a 10sec timer running but i want to make it that if u hit a fuel can it adds 5secs to the timer and if u hit a cone it removes 2secs.This is my code so far
var fuelpoints = 0;
var conepoints = 0;
startButton.visible = true;
[code]....
I am trying to make a game in Flash using Action Script 3,
I have everything in the game and the game works, but I am trying to add a restart function so the game will go back to the start of the level when you pres the 'R' key.
My game starts off with a title screen on Frame 1, and there are 2 levels, 1 is in frame 2 and the other is in frame 3.
When you click the level you want on the title screen it takes you to the frame which has the required level in it by using a gotoAndStop[code]...
We have a flash game being developed in actionscript 3 and it runs much more slowly on our remote server.The game specs:-8 different movie clips, all 1 frame static png files from 10x10 to 100x100anywhere from 10 to 60 instancesof those MCs on screen at any given timeevent loop is run from a flash Timer at 25msall interaction is via the keyboardThe strange thing is, we publish the swf file and run it locally and everything is fast.We copy the swf to a remote server and everything runs much more slowly. The music plays at normal speed, but the movieclips all move around the screen at about half speed.
Why would the file run differently when fetched from a remote server? Isn't the swf always being run locally anyway? Also, we ran it locally and remotely with the task manager running and it does not seem to consume much CPU or memory.EDIT: Ok, this is really weird. I added a framecounter textfield to the game. It reports the number of ms since the last timer tick. It consistently reports 50ms. My timer is clearly set to 25. This explains the half speed, but what explains this? I also added a check on the timer.Interval property to see if it had changed and it hasn't; it's still set to 25 while the game is running.ode to use ENTER_FRAME instead of timer, and it works. I get the full 40fps, give or take a few %. Still not sure what's wrong with the timer though; if it was being delayed by the time spent in my loop it would fluctuate, but it doesn't. It's 50ms every time no matter how much is going on.Here's the code I'm using(more or less):
t = new Timer(25);
t.addEventListener(TimerEvent.TIMER, timerTick);
t.start();
[code]....
I am looking for a countdown timer what will countdown mins + seconds. All Ican find is a countdown to an event christmas day etc, but this wont work for what I need. I need a timer countdown that wont start again everytime a user enters the game I need a timer so all users enter the game at exactly the same time to the second, I've tried to do it using as3 php mysql but there is to much time difference between users how will I do this.
View 2 Repliesi have spent several days on this and still can't get it to work. The code below is ok, I am playing a bowling game using the keyboard and timer with a text readout of the elapsed time, the bowl moves a set number of pixels on the screen. whilst in full screen mode I would like to click a start/play button on the screen to start the game and timer again, everything is in frame 1. Also I would like the game to just accept the keycode 77 and keyboard event (2 events only to move the bowl) and then wait for the start/play button click.
[Code]...
I am a student working on a project with flash. I am simply trying to make a flash game using Actionscript 3 in Adobe Flash CS5. Everything is working fine, i can walk and jump, but I want the game to restart if the Main character touches an object and dies (like spikes in a pit). I have a main menu in frame 1 and the first level on frame 2. The main character is called "player_mc" and the object that kills him is called "dies".
Code:
//The Code For The Character (Player_mc)
import flash.events.KeyboardEvent;
import flash.events.Event;
[code].....
The code i have for my brick breaker game is this one (followed by a tutorial): The thing is that i can't get the game to restart with 1 less level when the ball hits the bottom. Anyone knows how to do this? I've tried to run the function makeLvl(null); after the part where it says lives--; but it still doens't work. PHP Code:
[Code]...
I am new to flash and im trying to make a game. Im stuck on hitTest. I have many black boxes falling down and I want the game to reset when the black boxes touch my red circle. I used this code for my boxes:
[AS]
this.createEmptyMovieClip("canvas_mc",10);
myInterval = setInterval(addbox1,500);
function addbox1() {
[Code] .....
My red circle is controlled by the mouse. The code for that is:
[AS]onClipEvent (load) {
startDrag(this, true); }[/AS]