Professional :: Fadeout Of Movie Clip When Exiting Frame?
Dec 1, 2010
I've got a timeline of events going on with about a dozen frames and about a dozen buttons. Clicking on each button will take you to a different frame. Simple enough. I have no problem with fading the specific frames in (I make the whole content of the frame a movie clip, then tween the alpha programatically as soon as you enter that frame). The issue I have is fading it out, so when you click on another button, that content on the current frame fades out and then you jump to a separate labeled frame, where the new content fades in).
View 7 Replies
Similar Posts:
Mar 9, 2012
I load an external swf file (a music player) in a certain frame but need to figure out how to remove it when the user navigates to a different section. I've googled it and checked out the rest of the forum but having a hard time finding a specific code I can directly insert, I'm still not too code oriented and wouldn't know how to write it out even if given the proper terms. I feel as if it should be something as simple as:[code]But I don't know AS3 so I ultimately have no clue.
View 10 Replies
Jan 14, 2010
I have found some code on the web that loads a picture from a folder into a movie clip, and cyle with fadeOut and fadeIn to the next picture by using left and right arrow. I have made some changes to this code by having the pictures cycle with a timer and I also added a group of 6 movie clips for a total of 7 with their own set of picture arrays. So far so good however I am trying to get the fadeOut and FadeIn with a small delay from each other but always in the same order. In other words I want to have clips 1 to 7 fadeOut with a small delay of maybe .5 sec. between each and same thing when the next picture fades in.
[Code]...
View 0 Replies
May 9, 2010
have 1 button inbeded in a movie clip named mcintroclp that is on frame 1 of my main timeline, Frame 2 is labeled port_btn on the main timeline. In the timeline of the movie clip mcintroclp I've put the code:
stop();
function buttonClick(event:MouseEvent):void
{
[code]......
View 12 Replies
Feb 8, 2012
I am working with an iMAC running 10.6.8.I have created a flash file with only the main scene, which has a List button and a Home button. The List button has 20 links as a scroll list, each link installs a movie clip from the library.The problem I am having is the List button works fine until I add the Home button, then the Home button works fine, but the List button only works on the frame that the action is on. Each button is on it's own layer, and runs the whole length of the show, which is 220 frames. I have a stop label at each place a movie clip is to play.
If I remove the Home button from the main scene and put it into each movie clip, how do I tell the movie clip to go to the main scene frame 1?
View 7 Replies
Mar 29, 2011
In flash CS5 I want to go back to the main time line, from inside a movie clip button, so when i click the the movie clip it goes to another frame on the main time line..
View 5 Replies
Jan 8, 2009
if there is a type of eventlistener that listens when externally loaded swf moves from frame 1 to frame 2? (or from frame 4 to frame 5 etc) SWF is loaded with url-loader and it stops at frame 1.Theres a "to the next frame" button inside content-SWF. When user pushes it,swf jumps one frame ahead. I cannot alter that content SWF anyhow, so I should use some kind of event listener that reacts when frame changes in loaded SWF.
View 14 Replies
Nov 18, 2011
I have a need to have a section in an app I am creating where I have imported an external (print2flash)SWF into my main SWF timeline. When the button is pushed, it moves to a new frame on the main timeline. Problem is, when I forward to the next frame, the SWF stays on any future frame I go to. In essence I need to clear what was imported when I leave one frame and enter another.
This is the code I am using to import the print2flash SWF
import Print2Flash.* stage.scaleMode=StageScaleMode.NO_SCALEstage.align=StageAlign.TOP_LEFT var P2FDocLoader:Print2FlashDoc3=new Print2FlashDoc3("modules/FlashDoc.swf",300,120,650,520,this)P2FDocLoader.addEventListener(Print2FlashDoc3.ONLOADEVENT, OnLoaded);
var P2FDoc:MovieClipvar totalPages:Number=0
function OnLoaded(e:Event) {
P2FDoc=P2FDocLoader.getDoc()}
Is there away to add on on leave frame unload function?
View 2 Replies
Jun 28, 2011
How do I remove objects created only with code so that they don't ovelap when entering the frame again?[code]...
View 3 Replies
Feb 10, 2010
I have searched countless forums (here and other sites) and still have yet to find the solution I am looking for (hopefully it exists).I have an flv file being loaded by the flv playback component. It all works except that the video (and audio) continues to play even after navigating away from the frame on which the component instance is located.I have found a solution that stops the audio by using: SoundMixer.stopAll();But the video is still streaming and affects the site's performance.I want to stop both the audio and video, which means using: playbackInstance.stop();However, all the solutions I have come across basically say to add the stop function to all buttons that could potentially navigate from the frame with the playback instance.
This seems completely tedious and bulky, particularly because I have navigation buttons visible from my "main swf" and the MULTIPLE playback instances I have are located inside a loaded swf with its own navigation as well. By nature of design, the playback instances will not always be on the stage so calling references will undoubtedly throw errors. Of course, there are ways to do all of this with conditional statements, etc. But it just seems like a waste of time.
View 9 Replies
Jun 30, 2009
it isn't such a big problem bur for a beginner like me it is.I have a movie clip called "Lion_beginning_mc", inside of it I have 3 Key Frames and Inside each and one of them I have different shapes.For example:Key Frame number 01 - DogKey Frame number 02 - CatKey Frame number 03 - MouseI want to move this movie clip "Lion Beginning_mc" form Key frame number 1 to Key frame number 20.I want the Dog,Cat and a mouse to change between each other only once while moving from Key Frame number 1 to 20.And then when the movie clip "Lion Beginning_mc" reaches his goal another movie clip or a frame (with a shape) will start.
View 5 Replies
Jun 28, 2010
Scene1->MovieClip1->Image1(as a button)Scene1->MovieClip2->MovieClip3->MovieClip4->frame1Now I want to call frame1 from Img1 have a parent Scene1 common.How can I do this.I have tried
on(release){
_parent.MovieClip2.MovieClip3.MovieClip4.gotoAndPl ay("frame1");
}
[code].....
View 2 Replies
Feb 3, 2010
Client wants the audio from splash page to fade out in bg when user clicks enter button and leaves page and enters next html page? How to do this? WIth AS? Javascript? Does this file need to be embeded on both html pages?
View 5 Replies
Apr 8, 2012
I created a movie clip which plays ok. But when it ends there is a slight jump, if you will, when it goes back to frame 1 to begin playing again. Does anyone know how to make the transition unnoticeable from the last frame of a movie clip to the first frame of a movie clip?
View 4 Replies
Aug 18, 2011
i created a two layer in time line in one layer there is a movieclip called mc1. In the same layer in 15th frame i have another movie clip mc2. Inside the movieclip mc2 i created another movie clip at frame10 now if i clik the the mc1 on first frame The movie clip should goto and stop at tenth frame
View 4 Replies
Mar 26, 2004
i have a movie clip with a dynamic text field being animated...i have a text file with this in it
&textline1=time
&textline2=place
&textline3=year
&textline4=month
now how do i make the movie clip to first go from frame 1 to 10( last frame in teh movieclip) with the text time and then when the movie clip starts again it should say place and so on and so forth.. depending on how many textline variables i define in the text file?
View 5 Replies
Apr 30, 2009
is it possible to link a frame inside a movie clip from main time line?
View 4 Replies
Jun 30, 2011
i'm very new at flash and finally ended all the work i wanted to do here. now i just need to had the actions so it will run properly. basically i just need it to stop in each frame and run the animation of the movie clip on that frame. if it's i can put the project here so you can see what and were i need to had the actions.
View 1 Replies
Feb 23, 2010
I have a character, And in its movieclip I`ve got 3 frames (first has an idle pose, second a walking pose and third a running pose), each with a movieclip with an action in it.Well, what I wanted is that when I am walking with this character, and press the SHIFT key he runs.And I`ve got the following code
if (Key.isDown(Key.LEFT))[code]....
But when I click the shift button, he shows the first frame static of the movie clip in frame 3 (running frame).
View 9 Replies
Nov 2, 2010
I would like play head of a movie clip to return to a certain frame of that clip so a MC inside it would loop. I now have: stop(); as the action.
View 2 Replies
Jun 8, 2002
i've tried placing the code in the actions pnel of the mc; on the mc at the main time line and in various other unspeakable places... but i always get the same error warning me that this code can only be used in movieclip instances and that my stupidity levels are reaching dangerous levels. (error: 'Symbol=stage_mc, Layer=actions, Frame=1: Line 5: Clip events are permitted only for movie clip instances
onClipEvent(enterFrame){'
i fear somebody will reply to this with:'the code goes on the movieclip instance'...at which point i will take up a career in knitting (i knew i shouldn't have given up the course in the first place)
View 12 Replies
Jan 7, 2009
I have an invisible button and only one mc, the mc loops 3x then stops, this is defined with as in mc.
Now i want to play the movie from the invisible button but only loop it once. Which means i would like to play it from frame 1 to frame 215.
And also when u rollout i would like the movie to stop and go to frame 1.
this is my button code so far
Code:
on (rollOver) {
tellTarget ("loader")
{
[Code]......
View 12 Replies
Jun 7, 2010
I am making a quiz/game, and it works like this, two teams that have to take over the united states, by answering history questions, so right now I have it were when you click on a state, it takes you to a question (on a different frame in the main timeline), then I have a problem, if you get the question right it takes you to the "board" of the United States (that works), but when you are back the color of the state should change its color to red (on frame of the clip) if south got it and blue (another frame of the clip) if north got itBut instead i changes back to grey (default color, all start grey to begin with). I don't and can't seem to figure this out
View 2 Replies
Jun 5, 2010
CS3 Flash - Complete newbie to Flash and I'm trying to change an existing flash piece.It consists of 4 different text statements that appear on a Black background - the first appears and stays on-screen for 10 secs, then it starts to blur and fade away in about a sec, and then the next statement appears, etc, etc., and the whole lot loops.The 4 statements appear as Video Clips (Symbols?) in the library.I need to add a new statement, which means there will be 5 statements. I duplicated one of the library items and renamed it, which seems to have worked fine... but I cannot then work out how I insert that video clip into the Timeline and still have the same visual effects and timing as the existing ones? I can insert a blank frame, but then I can only drop the new video clip text onto that one frame.I've tried copying and pasting a whole set of frames, and then go in and change the text. Which I thought had worked, but then discovered that it also changed the original frames.... now understand that's because they are just instances and any change will affect the master Video Clip!
So can anyone advise if I can insert my newly added and renamed video clip into the timeframe and create the same effect as the others?Please keep any advice as idiot-proof as possible as this is my first venture into Flash... not finding it as intuitive as I hoped, spent 6hrs to date just trying trial and error without any real success.
View 1 Replies
Aug 20, 2010
I am making a web site in flash in which I have multiple movie clips.I have mc_buttonMenu on the main timeline.Inside of mc_buttonMenu, I have 3 buttons that are all button symbols.From the main timeline, I have a movie clip called mc_allPages.In this movie clip, I have a few layers.I have the content layer.This layer controls how my pages display.I have another layer called labels.I labeled frames 1 to 10 as 'home' and layers 11 to 20 as 'contactUs'.I have another layer in mc_allPages called actions.I put a stop(); on frame 10 and frame 20 on this layer.I want to be able to control the movie clip mc_allPages from within the movie clip mc_buttonMenu.I put some action script in various places, but it never worked.I tried this action script:
_root.btn_home.onPress()
{
Gotoandplay("home");[code]...........
I tried placing that code on the main timeline, inside mc_allPages, inside mc_buttonMenu and split up into both buttons appropriately for btn_home and btn_contactUs.Sometimes the animation would stop on frame 10 and sometimes it would just play through to frame 20 and ignore the stop(); I put on frame 10 inside the mc_allPages movie clip.However, whenever I pressed the button ( btn_contactUs ), it never went to the frame labeled "contactUs" in the allPages movie clip.
View 11 Replies
Mar 22, 2011
I'm making a room escape game and I've run into a problem. When an item gets added to the inventory, I'd like the user to be able to click on the item to affect another object (e.g. clicking screwdriver hides screws and displays other image) however when I add the code to the item, if the item is clicked and it's nowhere near the object it affects, the image pops up and it looks really stupid.
So what I'd like to be able to do, possibly using if and else statements or whatever's easiest, is to only have the inventory item be clickable if the movie clip of the object is affects is visible on the stage.
View 6 Replies
Feb 12, 2011
I have a movieclip in frame1 and there is a button in this movieclip.I have another movieclip in frame10 and this movieclip's instance name is "dene".When i clicked the button in the frame1's movieclip, i want to go 70 th frame in movieclip which's instance name is "dene".
When i write _root.gotoAndStop(10); i can go frame10 in mainstage but i can't go to movieclip "dene"'s 70th frame.I tried this code but it doesn't work;
on (press) {
_root.dene.gotoAndPlay(70);
}
View 5 Replies
Jun 30, 2010
I'm trying to create a movie clip on my my main timeline that has a movie clip button within it that pops up a box in the middle of the site that contains text and links. On Frame 1 I have the Up state, frame 2 the roll over state, and frame 3 my Down State (where Box appears).
[Code]...
The problem is that on the main time line, the button is clickable but doesnt do anything
View 7 Replies
Mar 22, 2004
I have a fadeIn prototype of:
[Code]....
This fades all my objects so on and so forth. I have a movie that is loaded into the _root, inside that is an mc called photos, jpgs are loaded into here and faded in. This photos being loaded in thing is based off some other code written by ... I can't remember I was looking to save time Anyway, thats like so.
[Code]....
View 2 Replies
Mar 24, 2010
I have a opening movieclip that starts playing for my background and then I have two buttons that come up on moues over event, that if clicked on start one of my two longer Movie Clips that I have as progressive download through a flvplayer on Key frame 2 & 3. I have all that working but I want it to go back to the start or keyframe 1 when the clip is done playing so I can use the same opening menu to click on the second movie clip can some one give me any tips on how to get to go back to the start when the movie is done.
View 2 Replies
