ActionScript 3.0 :: Stop Flv Playback When Exiting Current Frame?
Feb 10, 2010
I have searched countless forums (here and other sites) and still have yet to find the solution I am looking for (hopefully it exists).I have an flv file being loaded by the flv playback component. It all works except that the video (and audio) continues to play even after navigating away from the frame on which the component instance is located.I have found a solution that stops the audio by using:� SoundMixer.stopAll();But the video is still streaming and affects the site's performance.I want to stop both the audio and video, which means using: playbackInstance.stop();However, all the solutions I have come across basically say to add the stop function to all buttons that could potentially navigate from the frame with the playback instance.
This seems completely tedious and bulky, particularly because I have navigation buttons visible from my "main swf" and the MULTIPLE playback instances I have are located inside a loaded swf with its own navigation as well.� By nature of design, the playback instances will not always be on the stage so calling references will undoubtedly throw errors. Of course, there are ways to do all of this with conditional statements, etc. But it just seems like a waste of time.
I have four movie clips (.f4v) in 4 frames in a movie with watch buttons.. This movie has them been imported into a main movie container that has next and previous buttons. However if i play a movie then hit next frame, the movie continues to play in the background. The code below shows one of the actionscripts for a movie clip and then the main actionscript in the main movie.[code]...
I've put together a small website and have managed to teach myself quite a bit but there is one thing that I can't seem to find any info on,on the second page of the site I have a video, which progressively loads into the page, however I would like to make the video stop playing when you go to any of the other pages of the site. I'm sure this is a pretty straight forward piece of code but I can't work it out myself.This is the code I use to start my video playing.....
var nc:NetConnection = new NetConnection(); nc.connect(null); var ns:NetStream = new NetStream(nc);
In cs5.5, I have a frame with a movie clip on it. When a user clicks a button, I want the movie clip to stop and the user to be directed to another frame. It is correctly redirecting to a different frame, however, the movie clip is still on the stage and playing. How can I modify the following code to make it not just go to a different frame, but also stop the movie clip that is on that frame from playing?
btn_1.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame); function fl_ClickToGoToAndStopAtFrame(event:MouseEvent):void { gotoAndStop(10); }
I'm trying to get a quick replay command, "pressing space returns the scene to the previous frame".
[Code]...
The current function returns me to a previous frame (40), however the event does not stop, rather it keeps on adding new events ontop of each other once it returns to main frame. The main frame being where the actionscript is executed.
I was certain that this type of problem would have been previously discussed here or in a tutorial. I have looked quite a bit and could not find anything that puts all the pieces of my puzzle together.As the movie is playing (looping), I would like the movie to stop at the current frame whenever I click and hold the mouse down within the area of the container. Furthermore, I would like to be able to scrub the movie backward if I drag my mouse to the left within the container and as I reach the left end of the container, the movie is at the first frame. And similarly, I would like to scrub forward if I drag to the right within the container and as I reach the right end of the container, the movie is at the last frame. On top of this daunting task, I would like the movie to resume playing from wherever I have released the mouse.
Here is a file that I have started and I am pretty much at a loss as to where to go now. I know it has something to do with where the mouse is relative to either side of the container, but...how does one get it to work?Basically, I would like to emulate the functionality of the QuickTime Player - the one where you can grab the slider and drag it left or right to scrub in either direction and then upon release of the slider it resumes playing.I do not understand the media components in MX 2004, maybe this type of thing is "easy" to program in to one of those modules?
if there is a type of eventlistener that listens when externally loaded swf moves from frame 1 to frame 2? (or from frame 4 to frame 5 etc) SWF is loaded with url-loader and it stops at frame 1.Theres a "to the next frame" button inside content-SWF. When user pushes it,swf jumps one frame ahead. I cannot alter that content SWF anyhow, so I should use some kind of event listener that reacts when frame changes in loaded SWF.
I load an external swf file (a music player) in a certain frame but need to figure out how to remove it when the user navigates to a different section. I've googled it and checked out the rest of the forum but having a hard time finding a specific code I can directly insert, I'm still not too code oriented and wouldn't know how to write it out even if given the proper terms. I feel as if it should be something as simple as:[code]But I don't know AS3 so I ultimately have no clue.
I have a need to have a section in an app I am creating where I have imported an external (print2flash)SWF into my main SWF timeline. When the button is pushed, it moves to a new frame on the main timeline. Problem is, when I forward to the next frame, the SWF stays on any future frame I go to. In essence I need to clear what was imported when I leave one frame and enter another.
This is the code I am using to import the print2flash SWF import Print2Flash.* stage.scaleMode=StageScaleMode.NO_SCALEstage.align=StageAlign.TOP_LEFT var P2FDocLoader:Print2FlashDoc3=new Print2FlashDoc3("modules/FlashDoc.swf",300,120,650,520,this)P2FDocLoader.addEventListener(Print2FlashDoc3.ONLOADEVENT, OnLoaded); var P2FDoc:MovieClipvar totalPages:Number=0 function OnLoaded(e:Event) { P2FDoc=P2FDocLoader.getDoc()} Is there away to add on on leave frame unload function?
I've got a timeline of events going on with about a dozen frames and about a dozen buttons. Clicking on each button will take you to a different frame. Simple enough. I have no problem with fading the specific frames in (I make the whole content of the frame a movie clip, then tween the alpha programatically as soon as you enter that frame). The issue I have is fading it out, so when you click on another button, that content on the current frame fades out and then you jump to a separate labeled frame, where the new content fades in).
I'm trying to sync video with content. I can use cuepoints in Flash CS5 for that, or I can use FLVplayercaptions to sync video with caption. Is there a way to know the current time of playback?
I'm attempting to use Flash for displaying "scrolls" on our educational access channel. I have an announcement on each frame, which has a 7 sec delay, and a footer that displays the current time. What I would like to do, using the vars the Hours and the Minutes trigger a command that at a set time, like 8:20, it would jump to another swf file that might contain a video playback component. I can't seem to come up with the right combination to trigger it a set time. Here is what the frame 1 AS contains.
ActionScript Code: stop(); var wT:uint = 1000; //wT = waitingTime var ttL:uint = 1; //ttL = times to loop function customTimer (timeToWait:int = 1):void { [Code] .....
I have tried this a dozen different ways and I really am at my wits end.
I have a presentation that works like a powerpoint. Everything is working as it should, except one part. I have a movie clip with an instance named slides, and I want to actively display which frame number you are in this move clip.
I have tried more than one why but I see no reason why this should not work:
var frameNum:Number = this.slides.currentFrame; this.frameText.text = "P�quina " + frameNum + " de 173";
It appears to work at first, but does not update when I navigate the slides. It constantly says 1. Before I just added a function to the back and next buttons to frameNum++ and frameNum--, but after I created the Menu I would prefer it to automatically detect what frame it is on.
I have an ad banner in which I am certain I touched nothing that would affect the lack of looping in the file and lo and behold some elemnts loop even though in the actionscript it says to stop looping it....The trace says it played out the function to stop looping but it still does. I am not an actionscript pro but could anyone PLEASE possibly look at the file and tell me how to make sure EVERYTHING stops looping? The looping is causing google to prevent us from putting up the banners
I am near completing a basic website in AS3.0. I Have a portfolio section which loads in external swf's which contain a video with the FLV Playback Component. This is how I add the swf after it preloads:
i am having problems with the flv playback. i have an flv component and when i navigate away to second one it gets confused and the firrst one keeps playing... has anyone had this problem ? is there code to stop the flv playback when i leave it?
I'm experiencing difficulty when playing sound files. When I start the playback of the timelime using the enter/return button everything plays as it should. When I press it again to stop, the visuals stop but the sound file in the timeline just keeps playing until it reaches the end of the track- even if I have cut some out of the timeline. I used to use mx 2004 and never had the problem. Note: I am using this in college not on a personal computer.
So my FLV videos play just fine, however when I click on any of the navigation buttons to visit another section of my website, the audio keeps on going. There must be some simple AS to stop the audio once a button is clicked. As it is now, the user has to stop the FLV video manually by clicking the stop button on the FLV playback component.
I have created a .fla with a stage that is 650px by 550px, and everything looks good.Problem is when I play it back in a browser of flash player it crops the movie and cuts off some of it.
I have 4 videos (external playback flv) that can be play pressing 4 buttons. I noticed that when I decided to jump to another video the first video will still continue to load anyway. What can I write to tell the first video or even the 3 other videos to stop loading when I click to see 1 in particular. I found a code that I thought was working but it doesn't... here it is;
btn_1.addEventListener(MouseEvent.CLICK,btn1); function btn1(event){ if ((root as MovieClip).vids.vid2) { (root as MovieClip).vids.vid2.stop();
I am near completing a basic website in AS3.0. I Have a portfolio section which loads in external swf's which contain a video with the FLV Playback Component. This is how I add the swf after it preloads:
Code: function craDone(e:Event):void { trace("LOAD"); TweenLite.to (portfolioBucket_mc, 0.5, {x:-831, alpha:0, ease:Back.easeIn}); var undergroundLoaded = emptyMovieClip_mc.addChild(loadUnderground); back_btn.visible = true; [Code] .....
The Problem here is the movie still keeps playing and nothing I have tried has been able to stop it. I was hoping to be able to continually addSWF's and removeSWF's out of my emptyMovieClip_mc. I read about the new .unloadAndStop function for Flash Player 10. Tried it and it still nothing. I wrote it like this, maybe it's wrong?
i am trying to close a FLVPlayback component from a button in a parenting movieClipI have been successful in closing the video using a button from the same movieClip that the component resides.I did this using the following AS:
test_btn.addEventListener(MouseEvent.CLICK, test_btnClickHandler); function test_btnClickHandler(event:MouseEvent):void { showreel_flv.getVideoPlayer(showreel_flv.activeVid eoPlayerIndex).close();
I have a few flv component instances on different frames. When you click a navigation button the current flv should stop and it takes you to a new flv on a different frame. But the previous one keeps playing. How do I stop the current one playing when the button clicks?
I have a movie clip with a stop command on frame 1 and a stop command on frame 20.I'm trying to have two separate buttons that tell the MC (onRollOver) to play forward or to play backwards.
The actionscript on button #1- PHP Code: on(rollOver){����gotoAndPlay(_currentframe�+1);}� The actionscript on button #2-
I have an movieclip playing as auto start on the first page of my website. The component continues to play when I navigate away from the page. How can I stop the playback of the movie if it has not completed when navigation away from the page is invoked. I have search and am unable to find such an event using an FLVPlayback component. Presently there is no code in actionscript to display here.
i have application that streams videos from fms .i try to play video of 240 seconds, but when playback reaches 180 seconds i got NetStream. play. stop . it happens regularly at the same time.why does it happen? is it encoding of the video??
There seems to be tutorials on starting the next video at completion of the previous one using the FLV2.5 Playback component, but stopping a video playback event when a new one is triggered.� Ex.� Video one button is clicked and video starts playing, viewer clicks video two button mid way through playback of video one and starts video two.� How do I stop the playback of video one when video two button is clicked to avoid both playing simultaneously? � I have used:
