ActionScript 2.0 :: Movie Clip - Get The FadeOut And FadeIn With A Small Delay
Jan 14, 2010
I have found some code on the web that loads a picture from a folder into a movie clip, and cyle with fadeOut and fadeIn to the next picture by using left and right arrow. I have made some changes to this code by having the pictures cycle with a timer and I also added a group of 6 movie clips for a total of 7 with their own set of picture arrays. So far so good however I am trying to get the fadeOut and FadeIn with a small delay from each other but always in the same order. In other words I want to have clips 1 to 7 fadeOut with a small delay of maybe .5 sec. between each and same thing when the next picture fades in.
[Code]...
View 0 Replies
Similar Posts:
Feb 11, 2009
The client requested a simple slideshow with 8 images. I was able to piece that together, but only issue left is how to add a fade-in fade-out effect. The images I'm using on not embedded in the flash file but are ref from an xml file so the basic method is out of the question.
[]---XML FILE -----------------------------[]
<xml>
<images>
<a title = "_0000_shiny_wristlets.jpg" />
<b title = "_0001_LSSRT.jpg" />
[code]....
View 5 Replies
Jul 12, 2002
I'm trying to analyze the sample file load_images.fla which is delivered with flash mx... and here's my problem:there's a line in the first frame in the actions layer which is as follows:if (whichPic<5 && !fadeIn && !fadeOut) {.........}now what is "fadeIn" or "fadeOut"? I thought it might be a method of the MovieClip-Object, but it's not listed in the actionscript-reference. then I thought, it could be a method defined within the flash-movie itself, but it isn't (at least i couldn't find it). so what is it?
View 1 Replies
May 16, 2004
I like to think i have a decent knowledge of AS, but this silly little problem has evaded me... Check out my FLA. I'm trying to make a very simple function that will fadein/fadeout a MC whenever run.. you should understand from the FLA.
[URL]
View 3 Replies
Feb 24, 2011
I'm building a website with fadein/fadeout transitions between sections. On button click, a white rectangle on the very top layer (filling all the screen) is faded in. Once ended, the section changes and the rectangle fadeout is started.
It technically works, but I've noticed that the first transition is not fluid, while the next are fluid. Does exist an efficient technique to achieve the goal?
View 8 Replies
Oct 27, 2011
I want to do the same effect of time line like the link below, did any one know how to do that! [URL]I know the script for changing photo when you slide the bar in the slidebar!But can I add a fade in fade out effect between photos? Below are the script
"slider._y = slide_area._y;
slider.onPress = function(){
startDrag(slider, true, 0, slide_area._y, slide_area._width, slide_area._y);
}
[code]...
View 0 Replies
Aug 5, 2005
I'm making a banner for a personal site that cycles through a set of images loaded from XML (makes it easier to add/remove images whenever I need to) and I have used the slidshow script located here:how.htm for the base.What I have so far is working as expected, my images load with a fade in effect pause for a moment then cut off and the next image loads with the fade in effect (loop).My problem is that I would like the images to fade out (quicker than the fade in) after the short pause but I cant work out where in the script I need to execute this.Here is the script so far:
Code:
pauseDelay = 6000;
this.fadeInSpeed = 3;
[code].....
View 6 Replies
Jun 2, 2007
I have the following file which creates a really simple slideshow... At the moment you currently have to click to fade out and then fade back in to the next image... I just want it to run and play 10 images continuosly fading in and out...
View 1 Replies
May 5, 2005
FadeOut or FadeIn this dynamic text. And here is my fla file. So you can see and understand what i'm talking about.
View 3 Replies
Jan 13, 2011
I'd like to build a fairly simple website where the pages fade between each other, after looking around and remembering what I could from having Flash MX (can't remember which release) all those years ago I figured the best way would be something like this:
Pages as movieclips, these would be placed inside the stage, i.e. with space around them, and buttons along on side which, when clicked will fade in one 'page', and fade out any others where the alpha is at 1.
That way, using only one frame in the main timeline and not having to create fading tweens in each movieclip I can navigate freely between the pages in any order.
I managed to get to the point where I have two buttons and to movieclips, when the first button is pressed a 'page' fades in, and when the next is pressed the first 'page' fades out as the second fades in. However the fade out is delayed and much slower than the fade in, rather than faster as it should be.
Here's the AS
page2btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_4);
function fl_MouseClickHandler_4(event:MouseEvent):void
{
[code]....
how I might restructure this to get a the visual results I want in the most efficient manner?
View 2 Replies
Jul 21, 2011
I have an XML file that is updated every three minutes. The amount of records in the file can and will change. What I want is to load the XML, fade in 6 records, pause 5 seconds, fade out then in the next 6 records until the end of the file is reached. At that point, reload the XML file and repeat the process till infinity.
I have the XML file loading. I am able to count the records, parse the XML, and manually place XML data into dynamic text fields. I cannot get my FOR loop to function properly or get the script to pause between pages. I have not even attempted the fade in/out yet. I think I should have it parsing data properly before I add the cosmetics.
MY CODE:I do not get any compiler errors, but I do get an ouput error:
TypeError: Error #1010: A term is undefined and has no properties.
at xml_data_fla::MainTimeline/processXML()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete()
I think it is throwing this error as soon as it tries to display an empty record, if that makes since. Say there are 17 records. 17 / 6 = 2 with 5 remaining. When it tries to display the 3rd incomplete page the error is thrown (I think). When I test the file, it only displays the last page before an incomplete page. Here is what I have so far:
ActionScript Code:
// *** XML LOADER *** //
var xmlLoader:URLLoader = new URLLoader();
var xml:XML;
[code]....
View 2 Replies
Jun 4, 2003
I am dynamically loading images into a blank movie file. I would like if the images fade in as they load. Remark, I am not using a slide show effect. All i would like to do is load image and make it fade in. When the user clicks to go to the next frame the image should fade out. How to do this?
View 9 Replies
Nov 2, 2010
I have a very simple main.swf with buttons in a mc. once a button is clicked it loads and external swf file into x y pos.
How can I set it up so when the external swf loads with a fade in and the other one fades out?
This is my existing code now!
var Xpos:Number = 0;
var Ypos:Number = 75;
var swf:MovieClip;
[Code].....
how I might be able to accomplish this with this code. This code is from [URL] it works great but just need it to fade in and out the swf files.
View 1 Replies
Nov 11, 2004
could someone with scripting a fadein/fadeout transition for external swfs between the button clicks or suggest another way to do it?
View 1 Replies
Dec 1, 2010
I've got a timeline of events going on with about a dozen frames and about a dozen buttons. Clicking on each button will take you to a different frame. Simple enough. I have no problem with fading the specific frames in (I make the whole content of the frame a movie clip, then tween the alpha programatically as soon as you enter that frame). The issue I have is fading it out, so when you click on another button, that content on the current frame fades out and then you jump to a separate labeled frame, where the new content fades in).
View 7 Replies
Nov 5, 2010
I need to produce a photo review show (basically, a photo slide show), which incorporates still photography, and numerous video clips. We will have music playing in the background (not on the timeline - in the actionscript). The full presentation will run automatically - no user interaction, and therefore, I need the background music to automatically fade out when the video starts, and then fade back in when the video ends.
1. Is Flash CS5 the correct software to do this in?
2. code to tell the sound to fade out when the video starts, and fade back in when the video ends?
View 2 Replies
Apr 9, 2009
I've got a little animation that I'm going to embed in my website. I'd like it to start playing, say, 10 seconds after the page is loaded.
Is there an Actionscript command that effectively says "start play after 10 seconds"?
Or do I need to just add a bunch of blank frames within the animation to effectively start roughly 10 seconds in?
View 1 Replies
Oct 11, 2009
Need to delay a movie clip on my main fla for about 3 seconds then allow it to play, how would i do this?
View 3 Replies
Jan 21, 2009
Is it possible to load a movie clip with no delay? I have a flash project that loads multiple external swf's locally. This are actually different movie segments, like a clip for standing animation, fighting animation, defend animation, etc.. My problem is that, if i load another clip, let's say the fighting animation, it should be loaded instantly, i mean with no delay, as if it's part of the previous clip, because what happens is that when i load a specific clip there's a short delay of half-seconds before the clip loads. This is normal but is there any way on how can i load another clip as if it is part of the previous one?
View 1 Replies
Sep 24, 2009
Just finished building my photography portfolio www.tonerayphotography.co.uk in Flash CS3 using some Action script 2. When I first uploaded the site in Firefox 3.5 the menu buttons were `stuck` and there was a delay of about 30 secs before I could use them. Once I finally got use of the menu buttons I later returned to the site and it worked perfectly. Is this because the site was now in the cache of Firefox?
On my stage timeline there is one navigation movie clip holding aboutl 50 of my photos. Is this delay due the size of this movie clip trying to load?
View 1 Replies
Nov 25, 2009
in my main timeline i have no movie clips. I have a jpeg called background that basically has all the moviestuff. however when i publish the file on the web i get a delay between the music and the movie. like almost 30 seconds. Im not quite sure how to fix this. I have a swf file that loads my main swf file. SWF file that loads the main swf is only a preloader. here is the code for my music... i think that my problem is that the preloader is accounting for the movie clip but not the music, hence the difference in timing.
Code:
var soundReq:URLRequest = new URLRequest("Matrix.mp3");
var sound:Sound = new Sound();
var soundControl:SoundChannel = new SoundChannel();[ code]..........
View 0 Replies
Jan 14, 2005
I want to do a small delay for just a couple of frame between each duplicating in the script below. how to do this? Is there any easier way than using setinterval? I have tried using setinterval but I don't understand how to do it.show me another way to create timing with actionscript...
function makeItems() {
button._visible = 0;
for (var i = 0; i<item.length; i++) {[code]....
View 2 Replies
Dec 15, 2011
I am attempting to add a movie clip to the stage when a button is triggered. When the user clicks the button the movie clip is added to the stage; it works fine, but the following problems occur:
1) The appearance of the movie clip is delayed.
2) The sound in the movie clip starts to play but the movie clip appears when the sound is finished.
Additional information: 1) The movie clip has the sound in the timeline.Here is the code:
Actionscript Code:
//Buttons: Adds movie clip to stage.readtomeShortA1.addEventListener(MouseEvent.CLICK, playShortAReadMe1);var playShortA1:ShortAReadMe1function..[code].....
2) However, I also want to know is keeping the sound in the timeline of the movieclip the most efficient way to use sound in the movieclip? Or is there better, more efficient way to do it?
View 3 Replies
Mar 22, 2004
I have a fadeIn prototype of:
[Code]....
This fades all my objects so on and so forth. I have a movie that is loaded into the _root, inside that is an mc called photos, jpgs are loaded into here and faded in. This photos being loaded in thing is based off some other code written by ... I can't remember I was looking to save time Anyway, thats like so.
[Code]....
View 2 Replies
Dec 21, 2009
It's pretty common on many Architectural and Engineering sites to have a small movie on the home page. For example: URL... I've made similar movies for my websites using flash, and there always seems to be a lag and an image icon while the movie to loads. Here is a site where the movie loads unnoticeably: hensonarchitect com. Is there a way to use flash and have the movie load without an image icon placeholder? The flash movie that I have in mind is only 90kb, so a preloader isn't needed.
View 2 Replies
Feb 21, 2006
I'm trying to delay a function which then sets the onEnterFrame of a clip The colde I am trying will not work
[code]...
View 2 Replies
Jun 12, 2010
Is it possible to test or export only a small selection of a movie?
View 2 Replies
Sep 21, 2011
How many small size movie clips can I store in the library. On the stage I randomly use 6 of them but this random clips will come from an array full of 3500 m.clips. Is it reasonable , or should I use another way like using xml files.
View 10 Replies
Jan 1, 2012
I need assitance in creating start button to a small flash movie I created.I like to put start button on very fist frame of the move .I did incest actionscrip stop() to prevent of it start running on load but now I need a button and scrip to start running.My skill in action script are limited.I try create simbol as button or movieclip.
View 4 Replies
Apr 26, 2010
Here is the current code that is attached to the button
[code]...
Now what I am having an issue with is the gallary section is to small as it loads into the bottom of my movie (_parent). What I have decided to do is stop this process all together and have it go to a new url in a new window. Which is basic for you guys. If I take out the code under the on (release) section is it just a matter of a gotourl to get the page to open. The website is www.daemondesigns.com and originally was purchased as a template and so far have been able to put in all the new graphics and make text changes correctly with a few minor adjustments still needed. Ive got a book on actionscript 3.0 that I am just starting to make my way through but have a deadline that I may not make for this new gallery.
View 2 Replies
