ActionScript 3.0 :: Trying To Make An Interactive Navigation
Jun 14, 2010
Im tryin gto make an interactive navigation in adobe cs5 for my Flash class final tonight. Unfortunately my actions are bringing up a TON of errors. Its due in about 2 1/2 hours. I hope someone out there can figure it out quickly! below is my script and a list of syntax errors ActionScript Code:
stop();
btn1_btn.addEventListener(MouseEvent.CLICK, show (image1));
function showimage1(event:MouseEvent):void {
gotoAndPlay(label1);
}
[Code]...
I am attempting to make an interactive scenes in flash. I am going for something like this on the Breast Cancer Fund homepage. [URL] What is the easiest way to achieve this?
I'm putting together an interactive movie with button navigation of my portfolio using Flash but whenever I test the movie it keeps looping even though I've added a stop(); action to the first frame of my actions layer. This is also interfering with my buttons which are not working. I have modelled my movie on the photography portfolio from Lession 6 of the Flash Classroom in a Book and have checked my ActionScript for any errors but my syntax is error free. This is the Action Script I have added to the first frame of my actions layer to make the moview interactive so that when the user clicks on a button it will take them to the appropriate frame and play the instance until the next stop(); action so that it appears that the picture fades in on the screen and then stops playing:
[Code]...
Can anyone enlighten me on where my error could be? I have created buttons as symbols and labeled my keyframes as 'label1, label2, etc'. As recommended in the CIB. I can't figure out where I have gone wrong!
I'm trying to make an interactive map, whitch the size is 2880 - 2090, and the problem is the zoom in and out, I Want it to start with the magnification of 60%?
I'm trying to make an interactive map and how to make it so that when each button is clicked, it is pushed in front of the other buttons so that it covers them.
I've just started a new job, and I have the opportunity to do some work with Flash CS5 - I've never used Flash before and I'm excited to be learning new stuff! I have been tasked with creating an interactive thing... well, how 'bout I just show you
I've built it in Photoshop, but I need to make it come to life. The user should be able to grab the slider and drag it left or right and for the numbers to change appropriately. I don't even know enough about Flash to know what keywords to search to find a tutorial that'll show me how to do something similar!
I've been trying to make an interactive map. I have a stage that is...default size will do. On next layer I have map..on layer above is a mask with a hole in. The idea is the user can drag the map around and get info from hotspots on the map. I know I can restrict the area that the map can be dragged but this seems to only work if the map is smaller than the stage, but my map is much bigger than this. How do I set this up??
im trying to make a interactive panning with the tutorial Interactive Image Panning, Page 1 but this swf loads in a main swf.. the code i am using for the panning swf is
I have something in mind like this: [URL] so each time, when the mouse is over each state, different information should show up in the right side box with different information. How should I implement this? should I draw the right side information box as picture, and then write a script to ask information to display when mouse is on certain state, is this a movie clip?
I'm rather unfamiliar with Actionscript (up untill now, I've only made simple Flash animatons).I would really like to make a visual novel type of game (it's a game much like the Phoenix Wright games, minus the court scene parts of the game).
I am trying to make an interactive calendar. I would like the day to be highlighted when it opens. The highlight is a movie clip with a number for the instance name.
[Code]...
It's not working and I'm not sure why. I could easily be going about it ALL wrong. I suspect that it being an onClipEvent is an error. Can't I just getDate and setProperty?
I have attached the file. Once I understand how this works I can duplicate it for loading the correct month and year.
I'm a programmer and I've learn some basic knowledge about Flash Builder. What I can do with it now is to use the components and somethings override the redraw function to design my own components. However, I find that is a inefficient way and I seems to complex to achieve the animation with only codes. Are there some way to develop with Flash Builder and Flash CS? And how to make animation without complex code? Could you recommend some books for me?
I'm planning to make an interactive map which have a search function. What I want is when user insert a place name in the search textfield then click the search button, when it found, the map images/mc slide then locate the place point, which is a button. How could I do this?
I've created a loop that will create dynamic textfields by using the information from an array.
This is how I did it:
Code: var bigWordsArray:Array=['Services','creative content','previous clients']; var myTextField:TextField = new TextField(); var myFormat:TextFormat = new TextFormat();
I'm in the middle of making an interactive movie with events within it that act sort of like quick time events, only that there are multiple outcomes, making it sort of like an old "Choose your own adventure" book. I'm certain you can do what I want to do within Flash, but I have no idea how to as the only commands I know in Actionscript are stop(); and play(); and i'm not sure what the (); means, only that I needed it.
However, all I need is some simple commands to make it so that when the viewer hits the "a" or "l" key, the film will advance to another frame. These keys are meant to correspond to two different actions in the film depending on the situation - At one point, to leave through a door or dive through a window, and at another to dodge left or right away from an object. Though there is a third option for when the player does nothing, that should be simple enough to code so it's not a problem.
I want to make an Interactive Video in flash (or another method if known). basically to sum this up. I want to make a video which then some options will appear in the video (They could be buttons by the side of the video), which you then need to choose for another video to play. (Exactly like how you tube uses annotation) Is this possible with flash? or would I need to use another program?
I'm new ActionScript, and programming in general, however I've been doing a lot of tutorials and reading my Flash CS4 Bible, and cruising the forums like crazy trying to figure out how to go about scripting for my project.
Situation: I need to make an interactive flash movie that explains a painting.when you rollover different sections of the painting, I would like the rest of the painting to dim, and for that section to grow. if you are to roll out, it goes back to the first frame and the same thing happens for all of the sections.
If you are to click on any given section, there will be a voiceover, and possibly a little animation that goes along with it. if you either watch the whole thing or click anywhere on the painting, it should go back to frame.I've thought of a few ways to do it, but can't seem to get the scripting right.for now, I'm only worried about the first part because the rest is going to be similar.Frame 1 I have the painting and an invisible button over a section. frames 2-7 is that section growing and the rest of the painting getting dim there is a stop(); on frames 1 and 7
I WAS WONDERING HOW TO MAKE AN INTERACTIVE PICTURE VIEWER IN fLASH LIKE WHAT APPLE HAS IN LEOPARD AND SNOW LEOPARD. FOR EXAMPLE, WHEN THE PICTURE IS IN FRONT OF YOU AND YOU CAN SEE OTHER PICTURES BESIDE IT BUT THEY ARE FURTHER AWAY AND YOU CAN SEE THE REFLECTION ON THE FLOOR OF IT IS THIS A POSSIBILITY IN fLASH?
Making a chart in Flex with multiple series and a chart legend which is an interactive legend where upon selecting an item in the legend (which corresponds with a series in the chart) that specific series in the chart will slideDown or Up depending on whether it was just de-selected from the legend or re-selected. m
I have a Google Map in my Flash project with a polygon overlay. Is it possible to add to that overlay an EventListener so it triggers a function? All I can find in the API reference is something called "MapMouseEvent" but I can't figure out if that is what I need or how it works.
I am looking for a tutorial or a walk through to make an interactive Storyboard withinteractive maps, videos, audio files, play/pause button. And should be able to convert in multiple languages
Adobe Flash also lets users make interactive Flash quiz. This tutorial will guide you how to create interactive drop-down multiple-choice quiz in Adobe Flash. This short tutorial is just a sample of the workflow you'll use while authoring in Adobe Flash CS4.
Step 1 - Create a new document
a. Choose File > New.
b. In the New Document dialog box, selcet Flash File (ActionScript 2.0) and then Click OK.
Step 2 - Document settings Right-click on the stage, selcet Document Properties, then the Document Properties dialog box appears. It displays the current Stage size setting as 550*400 pixels, and the Background color swatch is set to white. You can change the size and color of the Stage as you want.
Step 3 - Import image to the stage Choose File > Import > Import to Stage, and then select the image you want. You also could click Ctrl+R to import image.
Step 4 - Add the multiple choice question to the Stage
a. Select the Text tool (T).
b. In the Property inspector (Window > Properties), select Static Text type to specify the type of text field, and then input the question " What was Michael's first song to air on MTV? ". You also could set the font size, family and color of the text.
Step 5 - Add ComboBox component
a. Select Window > Components.
b. Double-click ComboBox in the Components panel.
c. Select the component on the Stage, and name the instance name as box in the properties panel.
Step 6 - Add answer options
a. Select Window > Component Inspector. On the Component Inspector, click data, then the Value dialog box appears.
b. Click + to add answer options, and then replace the defaultValue as answer options, here the options are: thriller, billie jean, bad and the way you make me feel. After that, click OK. c. On the Component Inspector, click labels, then the Value dialog box appears. Please following the same steps above to add the values by adding the + button.
[code]...
If that's too complicate to you, you could choose some 3rd party quiz makers to make multiple choice quiz for you. Wondershare QuizCreator is such a good Flash quiz maker that help you create multiple Flash quiz with ease.
I need to make a interactive animated character, that would react to clicks in certain places, but instead of bitmap/vector animations, there would be video clips embeded in the swf. The video clips would be played in various combinations.Let me give you a example.
Start: A looped video of a person idling.
Start/hotspot1: The looping video fades-out, and a video of a person jumping up fades-in, plays, then fades-out back to the loop.
I have to embed the videos, so that there won't be any buffering. I tryed to embed the video, and use commands like gotoAndPlay(), gotoAndStop(), play(), stop(), but if I have more than one embeded video I start having problems controlling the clips.Here's one of my unsuccessfull attempts:
Clicking on the HS1, should fade-out VIDEO1, fade-in VIDEO2/play it/fade-out, and fade-in VIDEO1 again.
I have a button that has a controller in order to make it interactive as the user rolls over and out. The button is actually a movie clip, containing a video that simply has a build in and out effect which is triggered by the following:
im trying to make a navigation bar for my flash site. The idea is that all the content is displayed in small vertical lines, like this - and when you scroll over a line it opens out to a thumbnail. At the same time the other lines move outwards to accommodate the space taken up by the thumbnail. I wanted only the line your scrolling over to show but its kinda similar to the mac osx dock. Ive tried using examples of mac docks and none seem to do what i want them too.
I found this navigation system and im trying to figure out how to make it. Not going very well tho, i was wondering if anyone has some hints or a simular tutorial for this. This is the navigation system: [URL]
I want to make a navigation bar that loads image buttons randomly. Ex: (you can see the non-random version at the bottom of the page onI have 5 slots. I want to randomly load an external swf into an empty button in each of the slots. I do not want the same button to load in more than one slot. I'm thinking I need to use arrays? (which I don't know too much about.) Can anyone point me to a useful tutorial?
